Experimental and calculational analysis about the influence of the grain boundary diffusion depth on the magnetic properties of a sintered Nd-Fe-B magnet
Source abstract
Abstract
The grain boundary diffusion process (GBDP) has been widely applied to increase the coercivity of Nd-Fe-B magnets. After GBDP with Dy/Tb-rich diffusion sources the thickness of the Dy/Tb-rich shell formed on the epitaxial layer of the 2:14:1 main phase grain decreases from the magnet surface to the center. However, the influence of the Dy/Tb-rich shell gradient distribution on magnetic properties has not been thoroughly studied. In this work, a sintered Nd-Fe-B magnet was subjected to GBDP with Pr 60Tb 10Cu 30 alloy at 860°C for various diffusion times (3 h, 6 h and 9 h). The coercivity improves rapidly from 884 kA/m (without GBDP) to 1533 kA/m after GBDP of 3 h. The coercivity further increases to 1741 kA/m with increased diffusion time to 6 h. But only marginal coercivity enhancement (rising to 1803 kA/m) can be obtained by further prolonging the diffusion time to 9 h. Microstructure analysis indicates that the long diffusion time leads to the surface grain coarsening, which degrades the diffusion efficiency. Meanwhile, micromagnetic simulation indicates that if the thickness of the Tb-rich shell in magnet center is less than 4 nm, the coercivity increases significantly with the enhanced thickness uniformity of the Tb-rich shell. But if the thickness of the Tb-rich shell in magnet center is higher than 4 nm, the coercivity cannot be improved effectively by further increasing the thickness uniformity of the Tb-rich shell. The results in this work clarify the mechanism of the magnetic property dependence on the diffusion time and help to optimize the GBDP parameters in the future.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Magnetic materials and devices for the 21st century: stronger, lighter, and more energy efficient10.1002/adma.201002180 ↗
2. Energy efficiency opportunities and savings potential for electric motor and its impact on GHG emissions reduction
3. Simultaneous enhancement of coercivity and electric resistivity of Nd-Fe-B magnets by Pr-Tb-Al-Cu synergistic grain boundary diffusion toward high-temperature motor rotors10.1016/j.jmst.2023.03.001 ↗
4. Simultaneous enhancement of the coercivity and remanence at high temperatures in a sintered Nd-Fe-B magnet after grain boundary diffusion with Dy60Co40 alloy10.1016/j.matchar.2018.08.012 ↗
5. Efficient co-diffusion of Tb and Co in a sintered Nd-Fe-B magnet by low-melting point alloys10.1016/j.scriptamat.2023.115600 ↗
6. Coercivity enhancement of hot-deformed Nd-Fe-B magnets by the eutectic grain boundary diffusion process using Nd62Dy20Al18 alloy10.1016/j.scriptamat.2016.10.020 ↗
7. On dysprosium utilisation in multi-main-phase Nd-Dy-Fe-B magnets with core-shell microstructures10.1016/j.actamat.2023.119344 ↗
8. Perspective and prospects for rare earth permanent magnets10.1016/j.eng.2018.11.034 ↗
9. Microstructure of fine-grained Nd-Fe-B sintered magnets with high coercivity10.1016/j.scriptamat.2011.05.006 ↗
10. Normal and abnormal grain growth in fine-grained Nd-Fe-B sintered magnets prepared from He jet milled powders10.1016/j.jmmm.2016.10.139 ↗
11. Role of Ga on the high coercivity of Nd-rich Ga-doped Nd-Fe-B sintered magnet10.1016/j.jallcom.2019.03.114 ↗
12. Effects and regulation mechanisms of post-sinter annealing treatment on magnetic properties and microstructures of Nd-Fe-B sintered magnets with varying boron contents10.1016/j.jmst.2023.08.067 ↗
13. Strategy for high-coercivity Nd-Fe-B magnets10.1016/j.scriptamat.2012.06.038 ↗
14. Prospect for HRE-free high coercivity Nd-Fe-B permanent magnets10.1016/j.scriptamat.2018.03.012 ↗
15. Substantial coercivity enhancement in Dy-free Nd-Fe-B sintered magnet by Dy grain boundary diffusion10.1016/j.actamat.2023.118774 ↗
16. Inhibiting the abnormal grain growth for grain boundary diffused Nd-Fe-B magnets through Tb3O4 grain boundary construction10.1016/j.jallcom.2023.172893 ↗
17. Formation mechanism of Tb-rich shell in grain boundary diffusion processed Nd-Fe-B sintered magnets10.1016/j.scriptamat.2019.12.002 ↗
18. The strategy of solid-liquid phase separation diffusion with DyH3 to approach a trade-off between properties and cost for sintered Nd-Fe-B magnets10.1016/j.jallcom.2023.171297 ↗
19. Grain boundary diffusion efficiency of sintered Nd-Fe-B magnets by Al, Sn and Zn addition10.1016/j.jallcom.2023.171676 ↗
20. Significant progress of grain boundary diffusion process for cost-effective rare earth permanent magnets: a review10.1016/j.matdes.2021.110004 ↗
21. Improving the magnetic properties of sintered Nd-Ce-Fe-B magnets via grain boundary diffusion with Pr60Tb10Cu30 alloy10.1016/j.intermet.2022.107818 ↗
22. Temperature-dependent Dy diffusion processes in Nd-Fe-B permanent magnets10.1016/j.actamat.2014.09.039 ↗
23. Coercivity enhancement of Nd-Fe-B sintered magnet by grain boundary diffusion process using Pr-Tb-Cu-Al alloys10.1016/j.jmmm.2019.01.062 ↗
24. Evolution of Tb-shell homogeneity in Nd-Fe-B sintered magnets by long-term Tb grain boundary diffusion10.1016/j.jallcom.2023.171236 ↗
25. Coercivity enhancement of sintered Ce-substituted Nd-Fe-B magnets by grain boundary diffusion process of Tb10.1016/j.jmmm.2020.167274 ↗
26. Unusual surface microstructural evolution of Nd-Ce-Fe-B sintered magnets by (Nd, Pr)Hx grain boundary diffusion10.1016/j.matchar.2022.112073 ↗
27. Coercivity saturation in Nd-Fe-B sintered magnets treated by grain boundary diffusion process of Tb-Ni-Al alloy10.1016/j.jmmm.2023.171698 ↗
28. Effect of Ce content on the magnetic properties and microstructure of sintered Nd-Ce-Fe-B magnets after Pr70Cu30 alloy diffusion10.1016/j.jallcom.2022.165661 ↗
29. Micromagnetic simulation of anisotropic grain boundary diffusion for sintered Nd-Fe-B magnets10.1016/j.jmmm.2017.12.002 ↗
30. Study on magnetic properties and demagnetization process of the c-plane in the grain boundary diffusion magnet10.1016/j.jmmm.2024.171768 ↗
31. Design and preparation of a sintered Nd-Y-Fe-B magnet with high magnetic properties via multi-main-phase process and subsequent grain boundary diffusion10.1016/j.jre.2023.11.015 ↗
32. Experimental and computational analysis of the two-step demagnetization behavior of the surface grains of sintered Nd-Fe-B magnets10.1063/1.5036685 ↗
33. Micromagnetic simulations on the grain size dependence of coercivity in anisotropic Nd-Fe-B sintered magnets10.1016/j.scriptamat.2014.06.020 ↗
34. R2Fe14B materials: Intrinsic properties and technological aspects10.1103/RevModPhys.63.819 ↗
35. M.J. Donahue, D.G. Porter, OOMMF software package, available from: 〈http://math.nist.gov/oommf〉.
36. Microstructure and temperature dependent of coercivity of hot-deformed Nd-Fe-B magnets diffusion processed with Pr-Cu alloy10.1016/j.actamat.2015.08.013 ↗
37. Nd-Fe-B permanent magnet materials10.1143/JJAP.26.785 ↗
38. Experimental and computational analysis of magnetization reversal in (Nd, Dy)-Fe-B core shell sintered magnets10.1016/j.actamat.2017.01.055 ↗