Quantitative analysis of interfacial microstructural degradation in MCrAlY-coated superalloys during varied service conditions
Source abstract
Abstract
MCrAlY coatings are extensively utilized to shield turbine blades from oxidative and erosive circumstances. Nonetheless, the interdiffusion between the coating and the superalloy substrate results in the genesis of topologically close-packed (TCP) particles, thereby reducing the longevity of components exposed to high temperatures during operation. In this investigation, the progression of the microstructure in MCrAlY-coated Ni-based single crystal superalloys was meticulously quantified using digital image analysis, considering a spectrum of pre-exposure temperatures, durations, and stress levels. Through digital image analysis, we observed a variation in the length of TCP particles, ranging from 3.25 to 9.8 μm, under different conditions. Interestingly, the width of TCP particles remained consistent at 0.6 μm under all tested conditions. An innovative microstructure forecasting model was formulated, encompassing standardized parameters to evaluate the impact of pre-exposure conditions. This model demonstrated a robust correlation with experimental results. This study contributes to the refinement of our understanding of interfacial microstructure deterioration caused by operational conditions and aids in the progression of coating-substrate chemical compatibility.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Advances in coating design for high-performance gas turbines10.1557/mrs2003.194 ↗
2. Cold spray for production of in-situ nanocrystalline MCrAlY coatings–Part II: isothermal oxidation performance
3. Narita T., Sakata M., Nishimoto T., et al. Effect of creep-deformation on oxidation behaviour of nickel-based alloy with a rhenium-based diffusion barrier coating//Protective Systems for High Temperature Applications EFC 57. CRC Press, 2023: 166-175.10.1201/9781003421498-14 ↗
4. Diffusion modelling on the microstructure evolution in MCrAlY-superalloy system10.1007/s11666-020-01151-1 ↗
5. Effect of Re-base diffusion barrier on the oxidation performance of a gradient NiCoCrAlY coating10.1016/j.surfcoat.2022.129105 ↗
6. Material characterization of long-term service-exposed GTD-111 nickel based superalloy10.1016/j.engfailanal.2023.107061 ↗
7. Effects of precipitated phases on the crack propagation behaviour of a Ni-based superalloy10.1016/j.ijfatigue.2013.10.006 ↗
8. Effects of TCP and creep cavity on creep life in the rafting regime for Ru-containing Nickel-based single crystal superalloys10.1080/21663831.2023.2207580 ↗
9. The synergetic effect of rhenium and ruthenium on the long-term creep strength of single crystals of third-and fourth-generation nickel-based superalloys10.1134/S0031918X22080130 ↗
10. MCrAlY coating design based on oxidation-diffusion modelling. Part I: microstructural evolution10.1016/j.surfcoat.2014.05.067 ↗
11. Modeling of microstructural evolution in an MCrAlY overlay coating on different superalloy substrates10.1007/s11661-011-0897-3 ↗
12. Azarmi · Simul. Study Microstruct. Dev. a MCrAlY-superalloy Syst. Oxid. Process. [J. ] · 2021
13. Nanocrystalline coatings on superalloys against high temperature oxidation: a review10.1016/j.corcom.2021.06.003 ↗
14. Cold spray for production of in-situ nanocrystalline MCrAlY coatings–Part II: isothermal oxidation performance
15. Diffusion modelling on the microstructure evolution in MCrAlY-superalloy system10.1007/s11666-020-01151-1 ↗
16. PVD TBC experience on GE aircraft engines10.1007/s11666-997-0012-x ↗
17. PVD thermal barrier coating applications and process development for aircraft engines10.1007/s11666-997-0008-6 ↗
18. Thermal stability of Al–O–N PVD diffusion barriers10.1016/S0257-8972(98)00614-8 ↗
19. The effect of TCP morphology on the development of aluminide coated superalloys10.1016/j.msea.2005.01.005 ↗
20. Competitive deformation induced by TCP precipitation and creep inconsistency on dendritic structures in a nickel-based single crystal superalloy crept at high temperatures10.1016/j.matchar.2022.111855 ↗
21. The influence of high temperature annealing and creep on the microstructure and chemical element distribution in the γ, γ′ and TCP phases in single crystal Ni-base superalloy10.1016/j.jallcom.2017.10.076 ↗
22. Quantitative mapping of service process-microstructural degradation-property deterioration for a Ni-based superalloy based on chord length distribution imaging process10.1016/j.matdes.2021.109561 ↗
23. Role of microstructural stability and superdislocation shearing on creep behavior of two low-cost Ni-based single crystal superalloys at 1100° C/130 MPa10.1016/j.msea.2023.145796 ↗
24. Rafael Gonzalez · 2007
25. Microstructural evolution of NiCoCrAlY coated directionally solidified superalloy10.1016/j.surfcoat.2022.128487 ↗
26. Microstructure and composition evolution of a single-crystal superalloy caused by elements interdiffusion with an overlay NiCrAlY coating on oxidation10.1016/j.jmst.2019.11.017 ↗
27. Short reports from the metallurgical laboratory of the Royal Mechanical and testing Institute of Charlottenburg
28. Chord-length distribution function for two-phase random media10.1103/PhysRevE.47.2950 ↗
29. The precipitation of topologically close-packed phases in rhenium-containing superalloys10.1016/S1359-6454(01)00265-8 ↗
30. Precipitation behavior of μ phase and creep rupture in single crystal superalloy CMSX-410.1016/j.jallcom.2011.04.001 ↗
31. Stress-induced formation of TCP phases during high temperature low cycle fatigue loading of the single-crystal Ni-base superalloy ERBO/110.1016/j.actamat.2019.02.022 ↗
32. Precipitation behavior of μ phase and creep rupture in single crystal superalloy CMSX-410.1016/j.jallcom.2011.04.001 ↗
33. Stress-induced formation of µ-TCP phase during the early-stage interdiffusion process in the NiCrAlY/NiAlCoCrW model coating/superalloy system at ambient temperature10.1016/j.jallcom.2021.161980 ↗
34. Effect of pre-strain on microstructural evolution during thermal exposure of single crystal superalloy CMSX-410.1016/S1003-6326(11)60855-8 ↗
35. TCP phases growth and crack initiation and propagation in nickel-based single crystal superalloys containing Re10.1016/j.jallcom.2018.02.133 ↗
36. Distribution of rhenium in a single crystal nickel-based superalloy10.1016/j.scriptamat.2010.07.019 ↗
37. Effects of pre-exposure duration and temperature on interfacial Diffusion-Induced fatigue life degradation of MCrAlY-Coated single crystal superalloys10.1016/j.ijfatigue.2023.107977 ↗
38. Growth mechanism of the interdiffusion zone between platinum modified bond coats and single crystal superalloys10.1016/j.actamat.2015.12.014 ↗
39. Temperature influence on the development of interdiffusion phenomena in MCrAlY-coated nickel-based superalloys10.1002/mawe.202000270 ↗
40. Cristianini N., Shawe-Taylor J. An introduction to support vector machines and other kernel-based learning methods[M]. Cambridge university press, 2000.10.1017/CBO9780511801389 ↗
41. An improved viscoplastic constitutive model and its application to creep behavior of turbine blade10.1016/j.msea.2017.09.067 ↗