journal article·2024-06

Evolution of Laves phase related to tensile properties in cast ATI 718Plus under pulsed electric current

Mengcheng Zhou, Rongsheng Bai, Lulu Wang, Jiafeng Chen, Minqing Wang, Xinfang Zhang

Publisher page

Abstract

The Laves phase will seriously deteriorate the subsequent hot working and welding performance of cast ATI 718Plus. In traditional homogenization annealing, two-stage treatment is used to prevent the formation of harmful eutectic structures due to the initial melting of the low-melting point Laves phase. This has several obvious disadvantages including high processing temperature, long processing time and complicated operation. Electrical pulsed treatment, as a new efficient, feasible and energy-saving green means, has rapidly achieved the dissolution of Laves phase. The increase in diffusion rate of Nb element in Ni matrix by pulsed electric current is due to the enhancement of defect migration and vacancy defect density, leading to a significant enhancement in the diffusion kinetics and accelerating the dissolution of Laves phase. Laves phase dissolution process under the pulsed electric current is from the aggregated state accompanied by dense needle like η phase to the discrete state accompanied by sparse needle like η phase, finally forming a single long strip and being dissolved into an intermittent state until it disappears. In all, using pulsed electric current instead of traditional heat treatment for annealing cast ingots has the potential to achieve one-step homogenization, completely dissolving the Laves phase while eliminating element segregation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic Effects on Materials · Intermetallics and Advanced Alloy Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. High-cycle fatigue of nickel-based superalloy ME3 at ambient and elevated temperatures: role of grain-boundary engineering10.1007/s11661-005-0007-5 ↗
2. Mechanisms of creep deformation in polycrystalline Ni-base disk superalloys10.1016/j.msea.2006.08.148 ↗
3. High-temperature oxidation and hot corrosion behaviors of the NiCr-CrAl coating on a nickel-based superalloy10.1016/j.surfcoat.2004.10.108 ↗
4. The effect of phosphorus on the microstructure and mechanical properties of ATI 718Plus alloy10.1016/j.msea.2014.12.094 ↗
5. Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties10.2514/1.18239 ↗
6. TCP phase predictions in Ni-based superalloys: structure maps revisited10.1016/j.actamat.2010.10.013 ↗
7. The precipitation of topologically close-packed phases in rhenium-containing superalloys10.1016/S1359-6454(01)00265-8 ↗
8. Effect of ruthenium on the precipitation of topologically close packed phases in Ni-based superalloys of 3rd and 4th generation10.1016/j.actamat.2015.05.033 ↗
9. Solidification characteristics of advanced nickel-base single crystal superalloys10.7449/2004/Superalloys_2004_819_825 ↗
10. A technique for characterizing microsegregation in multicomponent alloys and its application to single-crystal superalloy castings10.1007/s11661-005-0338-2 ↗
11. Extending the size limits of cast/wrought superalloy ingots
12. Solidification of alloy 718 during vacuum arc remelting with Helium gas cooling between ingot and crucible10.7449/1989/Superalloys_1989_49_57 ↗
13. Solidification, segregation, and banding in carbon and alloy steels10.1007/s11663-003-0084-z ↗
14. Influence of homogenisation treatments on the hot ductility of cast ATI® 718Plus®: Effect of niobium and minor elements on liquation characteristics10.1016/j.msea.2020.140151 ↗
15. Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy10.1016/j.vacuum.2018.05.019 ↗
16. Quantitative characterization of two-stage homogenization treatment of alloy 718. Superalloys 718 and derivatives
17. Revealing the as-cast and homogenized microstructures of niobium-bearing nickel based superalloy
18. Homogenizing advanced alloys: thermodynamic and kinetic simulations followed by experimental results10.1007/s11665-016-2451-3 ↗
19. X. Liang, R. Zhang, Y. Yang, Y. Han. in: E.A. Loria (Ed.), An investigation of the homogenization and deformation of Alloy 718 ingots. Superalloys 718, 625, 706 and Various Derivatives, The Minerals, Metals & Materials Society, 1994.10.7449/1994/Superalloys_1994_947_956 ↗
20. Analysis of the homogenization of a nickel-base superalloy10.1016/j.scriptamat.2004.05.049 ↗
21. Homogenization of a nickel-base superalloy ingot material10.1016/j.scriptamat.2006.01.008 ↗
22. Quantitative analysis of homogenization treatment of INCONEL718 superalloy10.1016/S1003-6326(11)60814-5 ↗
23. Exploring the particle reconfiguration in the metallic materials under the pulsed electric current10.1002/srin.201800062 ↗
24. Using electric current to surpass the microstructure breakup limit
25. Modification of corrosion resistance of the plain carbon steels by pulsed electric current10.1007/s40195-018-0746-0 ↗
26. Hot tensile behaviors and microstructure evolution of Ti-6Al-4V titanium alloy under electropulsing10.1007/s40195-018-0735-3 ↗
27. Accelerated cluster dissolution using electropulsing for ultrafast performance regeneration10.1016/j.scriptamat.2019.10.045 ↗
28. Electropulsing induced evolution of grain-boundary precipitates without loss of strength in the 7075 Al alloy10.1016/j.matchar.2015.05.007 ↗
29. On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg-9Al-1Zn alloy10.1016/j.actamat.2009.06.044 ↗
30. Effect of electrical pulse on the precipitates and material strength of 2024 aluminum alloy10.1016/j.msea.2014.04.071 ↗
31. Stability of precipitates under electropulsing in 316L stainless steel10.1179/1743284714Y.0000000743 ↗
32. An ultrafast performance regeneration of aged stainless steel by pulsed electric current10.1016/j.scriptamat.2018.05.004 ↗
33. Effect of the precipitation of the η-Ni3Al0.5Nb0.5 phase on the microstructure and mechanical properties of ATI 718Plus10.1016/j.jallcom.2017.01.145 ↗
34. Homogenization kinetics of a typical nickel-based superalloy10.1016/j.jallcom.2019.04.147 ↗
35. Detection of current-induced vacancies in thin aluminum-copper lines using positrons10.1063/1.116700 ↗
36. Enhanced atomic diffusion of Fe-Al diffusion couple during spark plasma sintering10.1016/j.scriptamat.2015.08.012 ↗
37. Effect of pulse current on the diffusion behavior of FeCoCrNiMox-Al couples10.1016/j.matlet.2019.07.004 ↗
38. Revealing the pulse-induced electroplasticity by decoupling electron wind force10.1038/s41467-022-34333-2 ↗
39. Rapid repair of thermal aging embrittlement in 17-4PH martensitic stainless steel using pulsed electric current10.1016/j.matchar.2024.113650 ↗