Boosting sodium-ion battery performance using Na3(VO)2(PO4)2F microrods self-embedded in a 3D conductive interpenetrated framework
Source abstract
Abstract
Na 3(VO) 2(PO 4) 2 F (NVPOF) is considered as a promising cathode candidate for sodium-ion batteries (SIBs) owing to the high theoretical capacity and operating voltage. However, the challenges of its rate capability and cyclability limit its widespread application. Herein, the reduced graphene oxide decorated NVPOF microrods (NVPOF@G) are successfully synthesized by a facile hydrothermal-induced self-assembly procedure. It is found that the graphene oxides added act as a crystal nucleation growth regulator and provide rapid Na + and electron transport in the electrodes. The prepared NVPOF@G microrods exhibit a superior rate capability of 82.2 mAh g −1 at 50 C (fast discharge in 72 s) as well as considerable long-term cycle stability with a capacity retention of 87.6% over 1000 cycles at 0.5 C. Even at 50 °C, the NVPOF@G still achieves a high reversible capacity of 109.4 mAh g −1 with a capacity retention of 87.7% after 1000 cycles. This microrod structure shows superior structural stability, even at high temperatures (50 °C). Such a cathode incorporates the benefits of batteries and supercapacitors. This work gives a way to fabricate microrod-structure phosphate-based materials for commercial applications in high-performance SIBs.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Electrical energy storage for the grid: a battery of choices10.1126/science.1212741 ↗
2. Challenges and strategies of low-cost aluminum anodes for high-performance Al-based batteries10.1002/adma.202102026 ↗
3. Construction of oxygen vacancy-rich ZnO@carbon nanofiber aerogels as a free-standing anode for superior lithium storage10.1016/j.jcis.2023.04.066 ↗
4. Fundamentals, status and promise of sodium-based batteries10.1038/s41578-021-00324-w ↗
5. Comprehensive Investigation of the Na3V2(PO4)2F3–NaV2(PO4)2F3 system by operando high resolution synchrotron X-ray diffraction10.1021/acs.chemmater.5b00361 ↗
6. Manipulating the phase compositions of Na3(VO1−xPO4)2F1+2x (0 ≤ x≤ 1) and their synergistic effects with reduced graphene oxide toward high-rate sodium-ion batteries10.1021/acsami.1c21271 ↗
7. Ruthenium-oxide-coated sodium vanadium fluorophosphate nanowires as high-power cathode materials for sodium-ion batteries10.1002/anie.201411917 ↗
8. A Family of high-performance cathode materials for Na-ion batteries, Na3(VO1−xPO4)2F1+2x (0 ≤ x ≤ 1): combined first-principles and experimental study10.1002/adfm.201400561 ↗
9. Superior Na-storage performance of low-temperature-synthesized Na3(VO1−xPO4)2F1+2x (0≤x≤1) nanoparticles for Na-ion batteries10.1002/anie.201503188 ↗
10. Thermal stability of Na3–xV2(PO4)2F3–yOy: influence of F– for O2– substitution and degradation mechanisms10.1021/acs.chemmater.3c00539 ↗
11. Unravelling Li+ intercalation mechanism and cathode electrolyte interphase of Na3V2(PO4)3 and Na3(VOPO4)2F cathode as robust framework towards high-performance lithium-ion batteries10.1002/cssc.202200817 ↗
12. Scalable room-temperature synthesis of multi-shelled Na3(VOPO4)2F microsphere cathodes10.1016/j.joule.2018.07.027 ↗
13. Oxygen-tuned Na3V2(PO4)2F3-2yO2y (0≤y<1) as high-rate cathode materials for rechargeable sodium batteries10.1021/acsaem.2c03347 ↗
14. Porous yolk-shell structured Na3(VO)2(PO4)2F microspheres with enhanced Na-ion storage properties10.1016/j.jmst.2020.11.075 ↗
15. Encapsulation of Na3(VO)2(PO4)2F into carbon nanofiber as an superior cathode material for flexible sodium-ion capacitors with high-energy-density and low-self-discharge10.1016/j.jpowsour.2020.228249 ↗
16. Fast and stable Mg2+ intercalation in a high voltage NaV2O2(PO4)2F/rGO cathode material for magnesium-ion batteries10.1007/s40843-020-1311-1 ↗
17. Hydrothermally prepared composite of Na3V2(PO4)2F3 with gelatin and graphene used as a high-performance sodium ion battery cathode10.1016/j.jallcom.2022.166857 ↗
18. Y.M. Yin, C. Pei, W. Xia, X. Luo, D.S. Li, Recent Advances and Perspectives on the Promising High-Voltage Cathode Material of Na3(VO)2(PO4)2F, Small (2023) 2303666, 2303661-2303624.
19. Graphene quantum dots-shielded Na3(VO)2(PO4)2F @C nanocuboids as robust cathode for Na-ion battery10.1016/j.ensm.2016.07.007 ↗
20. Mixed sodium-lithium vanadium fluorophosphates Na3-xLixV2(PO4)2F3: the origin of the excellent high-rate performance10.1016/j.jpowsour.2018.09.088 ↗
21. Synthesis of uniform hierarchical Na3V1.95Mn0.05(PO4)2F3@C hollow microspheres as a cathode material for sodium-ion batteries10.1039/C7TA11105C ↗
22. Monitoring the crystal structure and the electrochemical properties of Na3(VO)2(PO4)2F through Fe3+ substitution10.1021/acsami.9b14249 ↗
23. Enhanced Na+ diffusion in Na3V2(PO4)2F2O cathodes via Zr4+ doping for high-rate and long-cycling sodium batteries10.1016/j.jallcom.2023.169314 ↗
24. Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance10.1038/ncomms12122 ↗
25. Sodium vanadium fluorophosphates (NVOPF) array cathode designed for high-rate full sodium ion storage device10.1002/aenm.201800058 ↗
26. 3D porous NaTi2(PO4)3 with long life, superior rate, and low-temperature properties10.1002/ente.201900386 ↗
27. Fast and durable high-capacity Na3V2(PO4)2F2O/rGO by in-situ composite of a small amount of rGO10.1016/j.est.2023.108400 ↗
28. Ultrahigh rate capability of manganese based olivine cathodes enabled by interfacial electron transport enhancement10.1016/j.nanoen.2022.107895 ↗
29. Fiber-shape Na3V2(PO4)2F3@N-doped carbon as a cathode material with enhanced cycling stability for Na-ion batteries10.1021/acsami.0c05490 ↗
30. In situ catalytic formation of graphene decoration on Na3V2(PO4)3 particles for ultrafast and long-life sodium storage10.1039/C6TA06936C ↗
31. In situ catalytic formation of graphene-like graphitic layer decoration on Na3V2−xGax(PO4)3 (0 ≤ x ≤ 0.6) for ultrafast and high energy sodium storage10.1039/C8TA11890F ↗
32. Enhanced electrochemical performance of sodium manganese ferrocyanide by Na3(VOPO4)2F coating for sodium-ion batteries10.1021/acsami.9b12041 ↗