Probing the influence of V2O5 and SBZKN composite additives on the magnetic characteristics and power loss of low-temperature sintered NiCuZn ferrites
Source abstract
Abstract
Soft magnetic ferrites with exceptional magnetic characteristics and low power loss are in continuous demand in both academia and industry. In this work, a series of Ni 0.22Cu 0.31Zn 0.47Fe 1.98O 4 ferrites doped with 0.5 wt% V 2O 5 and different SiO 2-B 2O 3-ZnO-K 2CO 3-Na 2CO 3 (SBZKN) contents were synthesized using a conventional solid-phase method under a low sintering temperature of 925 ℃. The crystal phase, density, microstructure, grain size distribution, magnetic characteristics and power loss of the NiCuZn ferrites were studies to elucidate the composition-structure-property relationship. The underlying mechanisms were also thoroughly analyzed. The results showed that all the samples had a single-crystalline phase and dense microstructure when sintered at 925 ℃. As the SBZKN content increased, the density, saturation magnetization ( Ms), residual magnetization ( Br ), complex permeability and quality factor ( Q factor) exhibited a varying trend that increased initially and then decreased, while the coercivity ( Hc) and power loss ( Pcv) showed the opposite trend. The highest values of density, Ms, Br , magnetic permeability and Q factor of NiCuZn ferrites, obtained at an SBZKN content of 0.3 wt%, were 5.121 g/cm 3, 51.07 emu/g, 188.47 mT, 389.8 and 114.3, respectively, while the lowest Hc and Pcv were obtained. The analysis showed that these outstanding magnetic and power loss characteristics were attributed to the uniform distribution of grain size and densification of NiCuZn facilitated by V 2O 5 and SBZKN incorporation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Synthesis of Ferrites · Electromagnetic wave absorption materials · Multiferroics and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Magnetic and dielectric properties of low-temperature sintered NiCuZn/CaTiO3 composite dual-performance materials10.1016/j.jallcom.2022.164906 ↗
2. Synthesis and magnetic properties of low-temperature sintered, LMZBS glass-doped dense NiCuZn ferrites10.1016/j.ceramint.2022.03.188 ↗
3. Effect of Bi2O3 contents on magnetic and electromagnetic properties of LiZnMn ferrite ceramics10.1016/j.jeurceramsoc.2022.02.059 ↗
4. On the ferrite-controlled iron coupling for enhanced soft magnetic hybrid composites via first-order reversal curves10.1016/j.actamat.2022.118667 ↗
5. Effect of reaction condition on microstructure and properties of (NiCuZn) Fe2O4 nanoparticles synthesized via co-precipitation with ultrasonic irradiation10.1016/j.ultsonch.2020.105369 ↗
6. Tuning the structural, optical and magnetic properties of NiCuZn (Ni0.4Cu0.3Zn0.3Fe2O4) spinel ferrites by Nb2O5 additive10.1016/j.ceramint.2022.06.016 ↗
7. Improved microwave absorption properties of TiO2 and Ni0.53Cu0.12Zn0.35Fe2O4 nanocomposites potential for microwave devices10.1016/j.jallcom.2016.04.190 ↗
8. Cd2+-enhanced the structure, electrical and magnetic properties of low-temperature sintered NiCuZn ferrites10.1016/j.ceramint.2023.11.261 ↗
9. Cold-sintered Na2WO4-Ni0.2Cu0.2Zn0.6Fe2O4 ceramics with matched permittivity and permeability for miniaturized antenna10.1111/jace.17649 ↗
10. Soft magnetic, gyromagnetic, and microstructural properties of BBSZ-Nb2O5 doped NiCuZn ferrites for LTCC applications10.1016/j.ceramint.2021.12.076 ↗
11. Enhanced electromagnetic properties of low-temperature sintered NiCuZn ferrites by doping with Bi2O310.1016/j.ceramint.2022.03.313 ↗
12. Synthesis of V2O5-Doped and low-sintered NiCuZn ferrite with uniform grains and enhanced magnetic properties10.1016/j.ceramint.2020.01.071 ↗
13. Microstructure, magnetic, and power loss characteristics of low-sintered NiCuZn ferrites with La2O3-Bi2O310.1111/jace.19351 ↗
14. Preparation and electromagnetic properties of NiCuZn ferrites and multilayer chip inductors10.1016/j.jallcom.2022.165380 ↗
15. Effects of Bi2O3-CuO additives on microstructure and microwave properties of low-temperature-sintered NiCuZn ferrite ceramics10.1016/j.ceramint.2023.11.374 ↗
16. Structure and microwave dielectric properties of BaAl2Si2O8 ceramic with Li2O-B2O3 sintering additive10.1016/j.jallcom.2019.153100 ↗
17. Sintering behaviour and microwave dielectric properties of BaAl2-2x(ZnSi)xSi2O8 ceramics
18. Effect of LMZBS glass on the microstructure and microwave dielectric properties of monocelsian ceramics10.1016/j.ceramint.2020.01.252 ↗
19. Magnetic and dielectric properties of NiCuZn ferrite with optimized Cu content and sintered by a two-step process10.1016/j.jallcom.2021.162906 ↗
20. Progress in materials and processes of multilayer power inductors10.1007/s10854-020-04188-8 ↗
21. Synergistic effect of V2O5 and Bi2O3 on the grain boundary structure of high-frequency NiCuZn ferrite ceramics10.1007/s40145-022-0585-3 ↗
22. Effects of Bi2O3-V2O5 mixture on microstructure and magnetic properties for Li0.42Zn0.27Ti0.11Mn0.1Fe2.1O4 ferrites sintered at low temperatures10.1016/j.jallcom.2021.160983 ↗
23. Nb2O5-doped NiZnCo ferrite ceramics with ultra-high magnetic quality factor and low coercivity for high-frequency electronic devices10.1016/j.jeurceramsoc.2021.04.038 ↗
24. Effect of Nd-Y co-substitution on structural, magnetic, optical and microwave properties of NiCuZn nanospinel ferrites10.1016/j.jmrt.2020.08.027 ↗
25. Bi3+ doping adjusted microstructure, magnetic, and dielectric properties of nickel zinc ferrite ceramics for high frequency LTCC antennas10.1016/j.ceramint.2020.07.046 ↗
26. Microstructure, magnetic, and dielectric interplay in NiCuZn ferrite with rare earth doping for magneto-dielectric applications10.1016/j.jmmm.2021.168229 ↗
27. Synthesis and deciphering the effects of sintering temperature on structural, elastic, dielectric, electric and magnetic properties of magnetic Ni0.25Cu0.13Zn0.62Fe2O4 ceramics
28. Synthesis, structural, morphological, electrical and magnetic properties of (1-x) [Ni0.35Cu0.15Zn0.50Mn0.05Fe1.95O4] + (x) [Rice husk ash] composites10.1016/j.materresbull.2018.12.027 ↗
29. Densification and magnetic properties of NiCuZn low-sintering temperature ferrites with Bi2O3-Nb2O5 composite additives10.1016/j.jallcom.2018.10.377 ↗
30. Effects of calcination temperature and flux doping on the microstructure and magnetic properties of low-temperature-fired NiCuZn ferrites10.1016/j.jmmm.2018.09.009 ↗
31. Effects of Bi2O3 addition on power loss characteristics of low-temperature-fired NiCuZn ferrites10.1016/j.ceramint.2018.06.035 ↗
32. Microstructure, magnetic properties, and loss performance of the Cu-substituted MnZn ferrites10.1016/j.ceramint.2023.09.363 ↗