journal article·2024-05Open access

Improved mechanical properties of GNPs/Al composites by eliminating alumina and obtaining a strong bonded GNPs-Al direct contact interface and Mg-rich phases

Zhaowei Huang, Hong Yan

Abstract

The interface between Graphene Nanosheets and Aluminum (GNPs-Al) without carbide and transition layers is referred to as a direct-contact GNPs-Al interface. In this work, the GNPs-reinforced aluminum matrix composites are fabricated by ultrasonic casting process . The interfacial structure of GNPs-Al is investigated using transmission electron microscopy , and the strength of the fabricated direct-contact GNPs-Al interface is analyzed. The results identified the presence of weak amorphous aluminum oxide at the original GNPs-Al interface. The direct contact GNPs-Al interface was obtained by introducing Mg. The migration of Al atoms formed an Al/C mixing zone between GNPs-Al, which led to the enhancement of the interface strength. The average UTS value has improved by about 20.5% due to the optimization of the interface structure . The enhancement of strength at the same toughness is achieved by the load transfer of GNPs, bridging, and the enhancement of dislocation storage capacity by the Mg-rich phase. The present work provides a new reference for the reinforcement of cast aluminum alloys by GNPs.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Micro/nano reinforced filled metal alloy composites: a review over current development in aerospace and automobile applications
2. Metal matrix composites-From science to technological significance10.1016/j.compscitech.2005.05.027 ↗
3. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and grapheme nanosheets10.1016/j.mser.2013.08.001 ↗
4. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
5. Modulus, fracture strength, and brittle vs. plastic response of the outer shell of arc-grown multi-walled carbon nanotubes10.1007/s11340-006-9344-6 ↗
6. Metal-graphene interfaces in epitaxial and bulk systems: a review10.1016/j.pmatsci.2020.100652 ↗
7. Enhancement of strength and ductility by interfacial nano-decoration in carbon nanotube/aluminum matrix composites10.1016/j.carbon.2019.12.038 ↗
8. Nucleation and growth mechanisms of interfacial carbide in graphene nanosheet/Al composites10.1016/j.carbon.2020.01.032 ↗
9. In-situ Al4C3 nanorods and carbon nanotubes hybrid-reinforced aluminum matrix composites prepared by a novel two-step ball milling10.1557/jmr.2018.462 ↗
10. In-situ formation of uniformly dispersed Al4C3 nanorods during additive manufacturing of graphene oxide/Al mixed powders10.1016/j.carbon.2018.09.057 ↗
11. Effect of interfacial microstructure on the mechanical properties of GNPs/Al composites10.1016/j.carbon.2020.02.069 ↗
12. Enhanced load transfer by designing mechanical interfacial bonding in carbon nanotube reinforced aluminum composites10.1016/j.carbon.2019.01.108 ↗
13. The interface properties of defective graphene on aluminum: a first-principles calculation10.1016/j.commatsci.2020.110157 ↗
14. Reaction-free interface promoting strength ductility balance in graphene nanosheet/Al composites10.1016/j.carbon.2019.11.010 ↗
15. The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion10.1016/j.actamat.2018.10.060 ↗
16. A novel aluminum-carbon nanotubes nanocomposite with doubled strength and preserved electrical conductivity10.1007/s12274-021-3284-4 ↗
17. Atomically resolved structure of the directly bonded aluminum−carbon interface in aluminum−graphite composites by solid-state friction stir processing: im plications for a high-performance aluminum conductor10.1021/acsanm.3c00393 ↗
18. Developments in investment casting process—a review
19. Effect of high pressure die casting on the castability, defects and mechanical properties of aluminum alloys in extra-large thin-wall castings10.1016/j.jmatprotec.2022.117525 ↗
20. Microstructure, hardness and tensile properties of A380 aluminum alloy with and without Li additions10.1016/j.msea.2013.05.088 ↗
21. Effect of heat treatment on microstructure and mechanicalproperties of A380 aluminum alloy deposited by cold spray10.1007/s11666-017-0640-8 ↗
22. Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering
23. Microstructure evolution and properties of graphene nanoplatelets reinforced aluminum matrix composites10.1016/j.matchar.2018.04.007 ↗
24. Improving the wettability of aluminum on carbon nanotubes10.1016/j.actamat.2011.01.061 ↗
25. Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes10.1016/j.carbon.2018.04.048 ↗
26. Formation of the orientation relationship-dependent interfacial carbide in Al matrix composite affected by architectured carbon nanotube10.1016/j.actamat.2022.117758 ↗
27. Regulating microstructure of Al matrix composites with nanocarbon architecture design towards prominent strength-ductility combination10.1016/j.scriptamat.2022.115037 ↗
28. Enhanced load transfer by designing mechanical interfacial bonding in carbon nanotube reinforced aluminum composites10.1016/j.carbon.2018.03.018 ↗
29. Effect of graphene on the microstructure evolution and mechanical properties of Al–10Si–2Cu–1.5Fe aluminum matrix composites
30. Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes10.1016/j.msea.2023.144918 ↗
31. Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum10.1016/j.actamat.2006.06.031 ↗
32. Wettability of a surface subjected to high frequency mechanical vibrations10.1016/j.ultsonch.2016.09.011 ↗
33. Effect of Mg content on the thermodynamics of interface reaction in Cf/Al composite10.1007/s11661-012-1090-z ↗
34. Enhancing strengthening efficiency of graphene nano-sheets in aluminum matrix composite by improving interface bonding10.1016/j.compositesb.2020.108268 ↗
35. Filament formation during elevated temperature deformation of high purity ultrafine-grained aluminum10.1016/j.matlet.2010.02.039 ↗
36. Microstructural and me chanical behavior of multi-walled carbon nanotubes reinforced Al–Mg–Si alloy composites in aging treatment10.1016/j.carbon.2014.01.013 ↗
37. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron
38. Enhanced mechanical properties of CNT/Al composite through tailoring grain interior/grain boundary affected zones10.1016/j.compositesb.2021.109133 ↗
39. Insights into the diffusion migration behavior of alloy atoms at the graphene/aluminum interface: First-principles calculations
40. Interface structure and strengthening behavior of graphene/CuCr composites10.1016/j.carbon.2018.03.018 ↗
41. Fracture toughness research of G20Mn5QT cast steel based on the acoustic emission technique10.1016/j.conbuildmat.2019.116904 ↗
42. Strengthening efficiency competition between carbon nanotubes (CNTs) and in-situ Al4C3 nanorods in CNTs/Al composites influenced by alumina characteristics
43. Interfacial characterization in carbon nanotube reinforced aluminum matrix composites10.1016/j.matchar.2015.10.014 ↗
44. Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests10.1016/j.compscitech.2015.03.009 ↗