journal article·2024-05

3D MoSe2@MoS2 heterojunction for humidity sensors to improve sensing performance

Wei Guo, Zhiquan He, Jialu Li, Li Yao, Yadong Qiao, Fadi Wang, Yuhang Wang, Fengping Wang

Publisher page

Abstract

Recently, 2D heterojunction materials have significant potential for application in humidity sensors due to their sensitive interface current regulation characteristics. Enhancing the contribution of the junction to the conductivity in the material is crucial for optimizing sensing performance. In this study, the n-n heterojunction of MoSe 2@MoS 2 with a unique 3D interface structure was successfully prepared using a hydrothermal method to increase the heterojunction content. The heterojunction improves the charge transfer at the interface, enhances the sensitivity of the material, and shortens the gas response/recovery time. The sensitivity of MoSe 2@MoS 2 with 3D heterojunction is one order of magnitude higher than that of single-phase MoSe 2, and its response (recovery) time is shortened from 55 s (51 s) to 30 s (33 s) compared with single-phase MoS 2. Furthermore, by optimizing the ratio of MoSe 2 and MoS 2 in the material, the contribution of heterojunctions to conductivity has been increased, thus enhancing the performance of gas sensing. More importantly, the sensing mechanism was deeply analyzed by exploring the changes of energy band and barrier before and after the sensor response.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Gas Sensing Nanomaterials and Sensors · 2D Materials and Applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Two-dimensional gas of massless Dirac fermions in graphene10.1038/nature04233 ↗
2. A highly stable optical humidity sensor10.1016/j.snb.2019.02.051 ↗
3. Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis10.1038/nature16521 ↗
4. An integrated self-healable electronic skin system fabricated via dynamic reconstruction of a nanostructured conducting network10.1038/s41565-018-0244-6 ↗
5. TiO2/(K,Na)NbO3 nanocomposite for boosting humidity-sensing performances10.1021/acssensors.9b02586 ↗
6. Fast-REsponse and Flexible Nanocrystal-based Humidity Sensor for Monitoring Human Respiration and Water Evaporation on Skin10.1021/acssensors.7b00199 ↗
7. Borophene-based materials for energy, sensors and information storage applications10.26599/NRE.2023.9120051 ↗
8. Rational design of nanoporous MoS2/VS2 heteroarchitecture for ultrahigh performance ammonia sensors10.1002/smll.201901718 ↗
9. Electrospinning of flexible poly(vinyl alcohol)/MXene nanofiber-based humidity sensor self-powered by monolayer molybdenum diselenide piezoelectric nanogenerator10.1007/s40820-020-00580-5 ↗
10. Resistive and capacitive response of nitrogen-doped TiO2 nanotubes film humidity sensor
11. A highly sensitive and stable rGO:MoS2-based chemiresistive humidity sensor directly insertable to transformer insulating oil analyzed by customized electronic sensor interface10.1021/acssensors.0c02219 ↗
12. Self-powered multifunctional monitoring and analysis system based on dual-triboelectric nanogenerator and chitosan/activated carbon film humidity sensor10.1016/j.nanoen.2021.106881 ↗
13. Hierarchical branched mesoporous TiO2–SnO2 nanocomposites with well‐defined n–n heterojunctions for highly efficient ethanol sensing10.1002/advs.201902008 ↗
14. Self-activated transparent all-graphene gas sensor with endurance to humidity and mechanical bending10.1021/acsnano.5b04680 ↗
15. A memristor based on two-dimensional MoSe2/MoS2 heterojunction for synaptic device application10.1063/5.0127880 ↗
16. High-performance flexible self-powered tin disulfide nanoflowers/reduced graphene oxide nanohybrid-based humidity sensor driven by triboelectric nanogenerator10.1016/j.nanoen.2019.104251 ↗
17. Honeycomb-like MoS2 nanotube array-based wearable sensors for noninvasive detection of human skin moisture10.1021/acsami.9b22915 ↗
18. UV-activated MoS2 based fast and reversible NO2 sensor at room temperature10.1021/acssensors.7b00731 ↗
19. MoS2 Van der Waals p–n junctions enabling highly selective room-temperature NO2 sensor10.1002/adfm.202000435 ↗
20. Reversing the humidity response of MoS2- and WS2-based sensors using transition-metal salts10.1021/acsami.1c03691 ↗
21. Fabrication of tin disulfide/graphene oxide nanoflower on flexible substrate for ultrasensitive humidity sensing with ultralow hysteresis and good reversibility10.1016/j.snb.2019.01.123 ↗
22. Temperature-dependent Raman modes of MoS2/MoSe2 van der Waals heterostructures10.1088/1361-6641/abb526 ↗
23. Multi-heterostructured spin-valve junction of vertical FLG/MoSe2/FLG10.1063/5.0006267 ↗
24. 2D Transition Metal Dichalcogenide Heterostructures for p- and n-Type Photovoltaic Self-Powered Gas Sensor10.1002/adfm.202003360 ↗
25. Binding MoSe2 with carbon constrained in carbonous nanosphere towards high-capacity and ultrafast Li/Na-ion storage10.1016/j.ensm.2018.02.012 ↗
26. Engineering morphology configurations of hierarchical flower-like MoSe2 spheres enable excellent low-frequency and selective microwave response properties10.1016/j.cej.2019.04.174 ↗
27. Edge-terminated MoS2 nanosheets with an expanded interlayer spacing on graphene to boostsupercapacitive performance10.1016/j.cej.2020.124204 ↗
28. H2-directing strategy on in situ synthesis of Co-MoS2 with highly expanded interlayer for elegant HER activity and its mechanism10.1002/aenm.202000291 ↗
29. MoSe2 nanosheet array with layered MoS2 heterostructures for superior hydrogen evolution and lithium storage performance10.1021/acsami.7b15854 ↗
30. Templated-construction of hollow MoS2 architectures with improved photoresponses10.1002/advs.202002444 ↗
31. Exploration of the sodium ion ordered transfer mechanism in a MoSe2@ Graphene composite for superior rate and lifespan performance10.1039/C9TA03108A ↗
32. Controlled exfoliation of molybdenum disulfide for developing thin film humidity sensor10.1016/j.cap.2013.11.031 ↗
33. Few-layer MoS2 dendrites as a highly active humidity sensor10.1016/j.physe.2019.113782 ↗
34. Retracted: highly sensitive MoS2 humidity sensors array for noncontact sensation10.1002/adma.201702076 ↗
35. Highly selective and sensitive chemoresistive humidity sensors based on rGO/MoS2 van der Waals composites10.1039/C7TA11375G ↗
36. The combinations of hollow MoS2 micro@nano-spheres: one-step synthesis, excellent photocatalytic and humidity sensing properties10.1039/C4TC00423J ↗
37. Poly (4-styrenesulfonate)-induced sulfur vacancy self-healing strategy for monolayer MoS2 homojunction photodiode
38. Tunable photoluminescence of monolayer MoS2 via chemical doping10.1021/nl403036h ↗
39. Strong photoluminescence enhancement of MoS2 through defect engineering and oxygen bonding10.1021/nn500532f ↗
40. Poly(4-styrenesulfonate)-induced sulfur vacancy self-healing strategy for monolayer MoS2 homojunction photodiode10.1038/ncomms15881 ↗
41. UV illumination enhanced desorption of oxygen molecules from monolayer MoS2 surface10.1007/s12274-020-2614-2 ↗
42. Schottky barrier height and electron affinity of titanium on AlN10.1116/1.1303733 ↗
43. Fabrication of oxygen-doped MoSe2 hierarchical nanosheets for highly sensitive and selective detection of trace trimethylamine at room temperature in air10.1007/s12274-020-2796-7 ↗
44. Gate-tunable interfacial properties of in-plane ml MX2 1T′–2H heterojunctions10.1039/C8TC01106K ↗
45. J. Jiang, C. Sun, 2010. Heterojunction principles and devices, PUBLISHING HOUSE OF ELECTRONICS INDUSTRY, 2010.
46. Localized excitons in NbSe2-MoSe2 heterostructures10.1021/acsnano.0c02803 ↗
47. Piezotronic effect enhanced flexible humidity sensing of monolayer MoS210.1021/acsami.7b17529 ↗