journal article·2024-05

Microstructure characteristics, yield asymmetry and fracture mechanism of the fine grained thin-wall Mg-6.03Zn-0.55Zr tubes fabricated by hot spinning

Jinqi Pan, Wencong Zhang, Huan Li, Jianlei Yang, Zan Zhang, Songhui Wang

Publisher page

Abstract

In this study, thin-wall Mg-6.03Zn-0.55Zr alloy tubes consisted of fine dynamic recrystallized (DRXed) grains and ultrafine grains were successfully obtained by hot spinning process. The results showed that the microstructures of the initial extruded tubes were greatly refined with average grain sizes of 4.46–10.32 µm (300–450 ℃) due to the DRX process, especially at low spinning temperatures. Moreover, the basal texture was transformed from extruded fiber texture to spun tilted plane texture with an angle of ∼10° deviated from the axial direction (AD). More specifically, the basal texture was weakened along AD but was strengthened along the transverse direction (TD) compared with the extruded texture due to the reduced difficulty in pyramidal slip activation and the shear deformation induced by the rollers. Consequently, the spun Mg-6.03Zn-0.55Zr alloys showed significant yield asymmetry along AD and TD at room temperature and the increase in spinning temperature had a negative influence on yield strength (YS) that the YS along AD decreased from 290 ± 5 MPa (300 ℃) to 232 ± 2 MPa (450 ℃) and the YS along TD decreased from 236 ± 6 MPa (300 ℃) to 198 ± 4 MPa (450 ℃). Both texture and grain refinement were the important factors in the mechanical properties according to the Hall-Petch relationship due to the varied activation fractions of deformation modes along AD and TD, especially the activation of prismatic slip. Moreover, the fracture mechanism of the spun alloys consisting of fine DRXed grains and ultrafine grains was unusual. The aggregated ultrafine grains played a negative role in the fracture mechanism, because the ultrafine grains were transformed from the dislocation cells and the micro-crack easily occurred in the ultrafine grains.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying10.1016/j.jma.2020.08.016 ↗
2. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
3. {10-12} twinning behavior under biaxial tension of Mg-3Al-1Zn plate10.1016/j.ijplas.2020.102754 ↗
4. The origins of high hardening and low ductility in magnesium10.1038/nature15364 ↗
5. Enhancement of room temperature stretch formability via grain boundary sliding in magnesium alloy10.1016/j.msea.2016.09.014 ↗
6. Enhanced stretch formability of AZ31 magnesium alloy thin sheet by pre-crossed twinning lamellas induced static recrystallizations10.1016/j.jmatprotec.2017.11.052 ↗
7. Emerging Hot Topics and Research Questions in Wrought Magnesium Alloy Development10.1007/s11837-020-04051-5 ↗
8. Evolution of the microstructure and fracture characteristics of a Mg-Nd-Zn-Zr-Mn alloy through heat treatment and extrusion10.1016/j.jallcom.2018.06.185 ↗
9. Effects of accumulative rolling reduction on the microstructure characteristic and mechanical properties of Mg-Gd-Y-Zn-Zr sheets processed by hot rolling10.1016/j.msea.2019.138317 ↗
10. Enhanced strength and ductility of friction-stir-processed Mg–6Zn alloys via Y and Zr co-alloying10.1016/j.msea.2019.138877 ↗
11. Feasibility of high strain-rate rolling of a magnesium alloy across a wide temperature range10.1016/j.scriptamat.2012.05.036 ↗
12. Anisotropy investigation of an ECAP-processed Mg-Al-Ca-Mn alloy with synergistically enhanced mechanical properties and corrosion resistance10.1016/j.jallcom.2022.165046 ↗
13. A review of spinning, Shear forming and flow forming processes10.1016/S0890-6955(03)00172-X ↗
14. A review of the mechanics of metal spinning10.1016/j.jmatprotec.2009.08.021 ↗
15. FE simulation and experiment study on flow forming of inner-splined flange10.1016/j.proeng.2017.10.1031 ↗
16. A methodology for assessing the feasibility of producing components by flow forming
17. A review of flow forming processes and mechanisms
18. Flow forming: a review of research methodologies, prediction models and their applications
19. Mechanism of grain refinement of aluminium alloy in shear spinning under different deviation ratios10.1016/j.matdes.2016.06.095 ↗
20. Enhancing hoop strength of titanium alloy tube by cross spinning10.1016/j.ijmachtools.2020.103530 ↗
21. Influences of feed rate and wall thickness reduction on the microstructures of thin-walled Hastelloy C-276 cylindrical parts during staggered spinning10.1007/s00170-019-04900-x ↗
22. Forming of hemispherical and hemi-ellipsoidal parts of low carbon steel sheet by mandrel free metal spinning process10.1007/s12289-018-1451-2 ↗
23. Grain refinement and orientation of AZ31B magnesium alloy in hot flow forming under different thickness reductions10.1016/j.jmst.2017.12.007 ↗
24. Microstructure and mechanical properties of AZ80 magnesium alloy tube fabricated by hot flow forming10.1016/j.matdes.2014.11.016 ↗
25. Microstructure evolution and strengthening mechanisms of Mg-6Gd-4Y-0.5Zn-0.5Zr alloy during hot spinning and aging treatment
26. Effect of deformation temperature on texture and mechanical properties of ZK60 magnesium alloy sheet rolled by multi-pass lowered-temperature rolling10.1016/j.msea.2017.12.024 ↗
27. Optimization of rolling temperature for ZK61 alloy sheets via microstructure uniformity analysis10.1016/j.msea.2013.03.057 ↗
28. A review on the effect of rare-earth elements on texture evolution during processing of magnesium alloys10.1007/s10853-016-0371-0 ↗
29. Nucleation and preferential growth mechanism of recrystallization texture in high purity binary magnesium-rare earth alloys10.1016/j.actamat.2017.07.038 ↗
30. Humphreys · 2004
31. Triggering rare earth texture modification in magnesium alloys by addition of zinc and zirconium10.1016/j.actamat.2013.12.015 ↗
32. Plastic contribution via DRX induced by kink and twin in a hot compressed Mg-Gd-Zn-Mn alloy with 14H LPSO10.1016/j.msea.2023.145022 ↗
33. Strain hardening, twinning and texture evolution in magnesium alloy using the all twin variant polycrystal modelling approach10.1016/j.ijplas.2020.102660 ↗
34. Tension-compression asymmetry and the underlying slip/twinning activity in extruded Mg-Y sheets10.1016/j.ijplas.2020.102878 ↗
35. Texture analysis in hexagonal materials10.1016/S0254-0584(03)00168-8 ↗
36. Deformation mechanisms and dynamic recrystallization of AZ31 Mg alloy with different initial textures during hot tension10.1016/j.matdes.2013.03.028 ↗
37. Orientation dependent slip and twinning during compression and tension of strongly textured magnesium AZ31 alloy10.1016/j.msea.2010.02.008 ↗
38. Revealing the tensile anisotropy, tension–compression asymmetry, and strain-hardening behavior of a high-performance Mg–Gd–Ag alloy10.1016/j.jallcom.2021.159238 ↗
39. The microstructure evolution and mechanical anisotropy of extruded Mg-2Zn-0.4Ce-0.4Mn alloy tube during tension in different directions10.1016/j.jallcom.2021.159829 ↗
40. Influence of texture on Hall–Petch relationships in an Mg alloy10.1016/j.actamat.2014.08.023 ↗
41. Quantitative prediction of texture effect on Hall–Petch slope for magnesium alloys10.1016/j.actamat.2019.05.016 ↗
42. Hall-Petch relationship in Mg alloys: a review10.1016/j.jmst.2017.07.022 ↗
43. Seventy years of Hall-Petch, ninety years of superplasticity and a generalized approach to the effect of grain size on flow stress