Thermal stability of Al2Si2Ce compound in Sr/Ce-modified cast and heat-treated A356 Al-alloys
Source abstract
Abstract
A long-standing debate persists regarding the thermal stability of Ce-containing ternary compounds in Al-Si-based alloys; this dispute hinders the accurate design of high-performance Ce-modified Al-Si alloys. In this study, a combination of electron probe microanalysis (EPMA), X-ray diffraction (XRD), and transmission electron microscopy (TEM) was employed to elucidate the thermal stability of Al 2Si 2Ce compounds in cast and heat-treated alloys with different annealing mechanisms. First, the compositions of the Ce-containing compounds measured by EPMA were found to be quite similar to those of Al 2Si 2 Ce, but with solubilities of < 1.5% Mg and < 0.5% Sr. Additionally, the XRD patterns further confirmed that Al 2Si 2 Ce is the only stable compound found in the present alloy after casting and annealing at 535 °C. Subsequently, the TEM analysis revealed that the crystal structure of the Al 2Si 2Ce compound is hexagonal with a space group of P-3 m 1 (164), while its lattice parameters are a = b = 0.423 ± 0.002 nm and c = 0.689 ± 0.005 nm, which are in good agreement with the literature data. Finally, the crystal structure of the Al 2Si 2Ce compound and its atomic arrangement along three different zone axes were constructed by disregarding the occupation of the Mg and Sr atoms.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. The formation of (Al, Si)3(Ti, Sc) through microalloying and solidification control synergy in Al-7Si-0.7Mg refines α-Al greatly10.1016/j.jallcom.2023.171741 ↗
2. Atomistic modeling of interface strengthening in Al-Si eutectic alloys10.1016/j.actamat.2021.117586 ↗
3. Development of a novel high strength Al-Si-Cu-Ni alloy by combining micro-alloying and squeeze casting10.1016/j.jallcom.2023.171780 ↗
4. Effect of heat treatment on the microstructure and mechanical properties of Er-containing Al-7Si-0.6 Mg alloy by laser powder bed fusion10.1016/j.jmrt.2022.04.023 ↗
5. Effects of submicron-sized TiC particles on the microstructure modification and mechanical properties of Al-Si-Mg alloy10.1016/j.jallcom.2023.171963 ↗
6. Effect of ultrasonic-assisted modification treatment on the microstructure and properties of A356 alloy10.3390/ma15103714 ↗
7. Revealing the correlation of microstructure configuration and mechanical properties of Al–Si–Mg alloy reinforced by C-doped TiB2 and SiC10.1016/j.matdes.2023.111694 ↗
8. Coupling effect of P, Ni micro-alloying and thermomechanical processing on microstructure evolution and high formability of Al-Mg-Si-Cu-Zn-Fe alloys10.1016/j.jallcom.2023.170009 ↗
9. The effects of combined addition of Ce and Yb on microstructure and mechanical properties of Al-Si-Mg-Cu-Cr casting alloy10.1007/s11665-022-07348-5 ↗
10. Effect of strontium and melt purification on the solidification microstructure of hypereutectic Al-Si alloys
11. Efficient alloy design of Sr-modified A356 alloys driven by computational thermodynamics and machine learning10.1016/j.jmst.2021.09.061 ↗
12. Study of the influence of zirconium, titanium and strontium on the properties and microstructure of AlSi7Mg0.3Cu0.5 alloy10.3390/ma15103709 ↗
13. A study on the interaction between a Sr modifier and an Al-5Ti-1B grain refiner in an Al-7Si-0.35Mg casting alloy10.1016/j.jallcom.2022.168598 ↗
14. Investigation of microstructure and mechanical properties of AlSi7Mg0.3Cu0.5 alloy with addition of Zr, Ti and Sr
15. Aluminum cast alloys based on the Al-Ce-Si-Mg system: an influence of silicon on crystallization, phase composition, and tensile properties10.1007/s11661-022-06812-0 ↗
16. Characteristics on microstructure and mechanical performances of 6111Al influenced by Ce-containing precipitates10.1016/j.jre.2020.10.024 ↗
17. The impact of Ce-containing precipitates on the solidification behavior, microstructure, and mechanical properties of Al-606310.1016/j.jallcom.2023.169805 ↗
18. Characterization of in-situ reinforced (Al,Si)3(Ti,Ce) precipitates in T6 treated A356-0.3wt%Ce-1.5vol%TiCN composite and its effects on mechanical properties10.1016/j.matchar.2022.111756 ↗
19. Accelerated discovery of high-performance Al-Si-Mg-Sc casting alloys by integrating active learning with high-throughput CALPHAD calculations10.1080/14686996.2023.2196242 ↗
20. Boosting for concept design of casting aluminum alloys driven by combining computational thermodynamics and machine learning techniques
21. Enhanced strength-conductivity trade-off in Al-Mg-Si alloys with optimized Mg/Si ratio10.1016/j.jallcom.2023.172682 ↗
22. Thermodynamic aspects of the constitution, grain refining, and solidification enthalpies of Al-Ce-Si alloys10.1007/s11661-004-0172-y ↗
23. Effect of Ce addition on microstructure, thermal and mechanical properties of Al-Si alloys
24. The crystal structure of two novel compounds: CeAlSi2 and Ce3Al4Si610.1006/jssc.1996.0388 ↗
25. Microstructure and mechanical properties of as casted Al-Si-Sc-Ce alloys prepared by molten salt electrolysis with varied cooling rate10.1016/j.jallcom.2023.169703 ↗
26. Modification of Al-Si Alloys by Ce or Ce with Sr10.1007/s11837-018-3192-6 ↗
27. Study on mechanism of refining and modifying in Al–Si–Mg casting alloys with adding rare earth cerium10.1088/2053-1591/acece0 ↗
28. Prospects of laser beam welding and friction stir welding processes for aluminum airframe structural applications10.1016/j.jmapro.2018.10.005 ↗
29. Advances in FSW and FSSW of dissimilar Al-alloy plates10.1080/01694243.2022.2028073 ↗
30. Friction stir welding in the aerospace industry: the current progress and state-of-the-art review10.3390/ma16082971 ↗
31. Formation of weld defects in cold metal transfer arc welded 7075-T6 plates and its effect on joint performance10.1088/1757-899X/629/1/012007 ↗
32. Recent developments in joining of aluminum alloys10.1007/s00170-016-9861-0 ↗
33. Properties of power beam welded steels, Al- and Ti-alloys: significance of strength mismatch, Welding in the World
34. Developments in laser welding of metallic materials and characterization of the joints, Welding in the World
35. Computer alloy design of Ti modified Al-Si-Mg-Sr casting alloys for achieving simultaneous enhancement in strength and ductility10.3390/ma16010306 ↗
36. The powder diffraction file: a quality materials characterization database10.1017/S0885715619000812 ↗
37. The ternary compounds of the type La2O2S in the systems rare earth-aluminium-silicon