journal article·2024-03

Effects of milling time and sintering temperature on the mechanical properties of 8 wt% WC/AlCoCrFeNiTi0.5 high entropy alloy matrix composite

Yeqing Wang, Rujiang Wang, Fuqiang Lv, Liang Wang, Zheng Chen

Publisher page

Abstract

The present study investigates the effect of milling time, and sintering temperature on the microstructure and mechanical properties of the spark plasma sintered 8 wt% WC/AlCoCrFeNiTi 0.5 high entropy alloys matrix composite (HEAC). The results show that the grain size is decreased first and then increased with an increase of milling time. The refined grain along with the homogeneous distribution of reinforcements is observed when milling for 15 h. It also shows both of relative density and compression strength of compacts are increased first and then decreased with an increase of sintering temperature. A highest relative density of 99.89 % and a fracture strength of 2683 MPa are obtained at 1150 °C. Another, sintering leads to crystal structure transition from BCC to FCC for the solid solution phase. The formation of (Fe, Co) 6W 6 C complex carbide as a main strengthening phase is conducive to the enhancement of hardness. The strengthening mechanism is mainly attributed to dislocation strengthening and Orowan mechanism.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Advanced materials and composites · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Sliding wear of spark plasma sintered CrFeCoNiCu high entropy alloy coatings with MoS2 and WC additions10.1007/s00170-017-0794-z ↗
2. CoCrFeMnNi high entropy alloy matrix nanocomposite with addition of Al2O310.1016/j.intermet.2017.03.019 ↗
3. Microstructure and properties of CoCrFeNi(WC) high-entropy alloy coatings prepared using mechanical alloying and hot pressing sintering10.3390/coatings9010016 ↗
4. Microstructures and wear behaviour of (FeCoCrNi)1−x(WC)x high entropy alloy composites10.1016/j.ijrmhm.2018.03.019 ↗
5. Influence of NbC additions on microstructure and wear resistance of Ti(C,N)-based cermets bonded by CoCrFeNi high-entropy alloy10.1016/j.ijrmhm.2020.105375 ↗
6. Exceptional strength-ductility combination of additively manufactured high-entropy alloy matrix composites reinforced with TiC nanoparticles at room and cryogenic temperatures
7. Ceramic-reinforced HEA matrix composites exhibiting an excellent combination of mechanical properties10.1038/s41598-022-25734-w ↗
8. A novel NbC/CrMnFeCoNi0.8 high entropy alloy matrix composites with ultrastrength and ductility: Experiments and density function theory
9. Microstructure and sliding wear behavior of (AlCoCrFeNi)1−x(WC)x10.1016/j.ceramint.2022.03.238 ↗
10. Microstructure and mechanical properties of in-situ TiC reinforced FeCoNiCu2.0 high entropy alloy matrix composites10.1016/j.msea.2021.141671 ↗
11. The directional array TiN-reinforced AlCoCrFeNiTi high-entropy alloy synthesized in situ via magnetic field-assisted laser cladding10.1016/j.apsusc.2021.151407 ↗
12. Microstructure and tribological properties of Al2O3 reinforced FeCoNiCrMn high entropy alloy composite coatings by cold spray10.1016/j.surfcoat.2022.128205 ↗
13. Enhanced wear behaviour of spark plasma sintered AlCoCrFeNiTi high-entropy alloy composites10.3390/ma11112225 ↗
14. Microstructure and properties of TiC-enhanced CrMnFeCoNi high-entropy alloy coatings prepared by laser cladding10.1016/j.triboint.2023.108246 ↗
15. Evolution of microstructure and mechanical properties of in situ synthesized TiC–TiB2/CoCrCuFeNi high entropy alloy coatings10.1016/j.surfcoat.2015.09.049 ↗
16. Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding10.1016/j.optlastec.2019.05.006 ↗
17. Microstructures and mechanical properties of FeCoCrNi high entropy alloy/WC reinforcing particles composite coatings prepared by laser cladding and plasma cladding10.1016/j.ijrmhm.2019.105044 ↗
18. High-entropy alloys fabricated via powder metallurgy. a critical review10.1080/00325899.2019.1584454 ↗
19. Effect of milling time on the microstructure, physical and mechanical properties of Al-Al2O3 nanocomposite synthesized by ball milling and powder metallurgy10.3390/ma10111232 ↗
20. Evaluating the influence of milling time,and sintering temperature and time on the microstructural changes and mechanical properties of Al-Y2W3O12-AlN hybrid composites10.1016/j.powtec.2020.08.094 ↗
21. The effect of milling time, and sintering temperature and time on the microstructure-property relationship of aluminium-matrix hybrid composites
22. The effect of particle size, sintering temperature and sintering time on the properties of Al–Al2O3 composites, made by powder metallurgy10.1016/j.jmatprotec.2009.04.007 ↗
23. The effect of sintering temperature and the amount of reinforcement on the properties of Al–Al2O3 composite10.1016/j.matdes.2008.11.027 ↗
24. Densification and grain growth during sintering of nanosized particles10.1179/174328008X353538 ↗
25. Effect of sintering temperature on properties of CNT/Al composite prepared by capsule-free hot isostatic pressing technique10.1007/s12666-016-0886-8 ↗
26. The effect of sintering temperature on Cu-CNTs nano composites properties produced by PM method10.2298/SOS1804477D ↗
27. Microstructure and tribological properties of in-situ carbide/CoCrFeNiMn high entropy alloy composites synthesized by flake powder metallurgy10.1016/j.triboint.2023.108295 ↗
28. A powder-metallurgy-based fabrication route towards achieving high tensile strength with ultra-high ductility in high-entropy alloy10.1016/j.scriptamat.2020.08.038 ↗
29. Grain growth and strengthening mechanisms of ultrafine-grained CoCrFeNiMn high entropy alloy matrix nanocomposites fabricated by powder metallurgy10.1016/j.jallcom.2019.152937 ↗
30. Investigations on silicon carbide reinforced high entropy alloy (CoCrNiMnFe) matrix composites produced by powder metallurgy process10.1007/s12633-023-02369-8 ↗
31. Fabrication and mechanical properties of AlCoNiCrFe high-entropy alloy particle reinforced Cu matrix composites10.1016/j.jallcom.2015.07.125 ↗
32. Y. Wang, R. Wang, J. Lin, L. Wang, Z. Chen, Mechanical and high-temperature wear resistance properties of WC-reinforced AlCoCrFeNiTi0.5 high entreopy alloy matrix composite, Ceramic International, In revision.
33. Oxidation behavior of arc melted AlCoCrFeNi multicomponent high-entropy alloys10.1016/j.jallcom.2016.02.257 ↗
34. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
35. Characterization of nanocrystalline CoCrFeNiTiAl high-entropy solid solution processed by mechanical alloying10.1016/j.jallcom.2009.12.010 ↗
36. Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys10.1016/j.msea.2011.11.044 ↗