journal article·2023-12

Using soda-lime glass transition temperature to enhance the efficiency of Cu2ZnSn(S,Se)4 solar cell

Yiming Wang, Yanchun Yang, Ruijian Liu, Shuyu Li, Lei Wang, Chenxi Zhao, Letu Siqin, Wenjing Xin, Xiaogong Lv, Hongmei Luan, Chengjun Zhu

Publisher page

Abstract

Homogeneous large-grain structure of Cu 2ZnSn(S,Se) 4 (CZTSSe) absorber has been proven to be one of the conditions for high photoelectric conversion efficiency ( PCE) devices. In this work, we explored that the different choices of selenization temperature had influences on the morphology, crystallinity, and electric properties of CZTSSe absorbers. With the selenization temperature of 540°C, the single-layer large-grain structure of CZTSSe absorber could be prepared, and grain boundary defects could be reduced. 540°C is also the transition temperature of the substrate (Soda-lime glass, SLG) of devices. The SLG softens at the transition temperature and the structure is unstable, resulting in Na entering CZTSSe better at 540°C than at a lower selenization temperature. The suitable Na diffusion can promote the growth of grains and help the corresponding device possesses the highest PCE (9.38%), which is also increased by ∼85% than ones prepared under the lower selenization temperature ( PCE stayed at 5%). Therefore, the appropriate selenization conditions for the high-efficiency devices also need to consider the properties of the substrates. These conclusions also propose the new point on obtaining the optimal selenization condition for the high-performance CZTSSe devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Coordination engineering of Cu-Zn-Sn-S aqueous precursor for efficient kesterite solar cells10.1016/j.scib.2020.01.005 ↗
2. Influencing mechanism of cationic ratios on efficiency of Cu2ZnSn(S, Se)4 solar cells fabricated with DMF-based solution approach10.1016/j.solmat.2019.02.029 ↗
3. Fabrication of Cu2ZnSn(S, Se)4 photovoltaic devices with 10% efficiency by optimizing the annealing temperature of precursor films10.1039/C7RA13069D ↗
4. Phase-separation-induced crystal growth for large-grained Cu2ZnSn(S, Se)4 thin film10.1021/acsami.8b10749 ↗
5. Lithium-doping inverts the nanoscale electric field at the grain boundaries in Cu2ZnSn(S, Se)4 and increases photovoltaic efficiency10.1039/C5CP04707B ↗
6. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
7. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
8. Kesterite Cu2ZnSn(S, Se)4 solar cells with beyond 8% efficiency by a sol-gel and selenization process10.1021/acsami.5b01151 ↗
9. A nontoxic solvent based sol-gel Cu2ZnSnS4 thin film for high efficiency and scalable low-cost photovoltaic cells10.1039/C5TA02833G ↗
10. Solar cell efficiency tables (version 62)10.1002/pip.3726 ↗
11. Cu2ZnSnS4 thin film solar cells10.1016/j.tsf.2004.11.024 ↗
12. 11.2% efficient solution processed kesterite solar cell with a low voltage deficit10.1002/aenm.201500712 ↗
13. High efficiency Cu2ZnSn(S, Se)4 solar cells by applying a double In2S3/CdS emitter10.1002/adma.201402373 ↗
14. Device characteristics of an 11.4% CZTSe solar cell fabricated from sputtered precursors10.1002/aenm.201703295 ↗
15. 10% Efficiency Cu2ZnSn(S, Se)4 thin film solar cells fabricated by magnetron sputtering with enlarged depletion region width10.1016/j.solmat.2016.02.002 ↗
16. Engineering of interface band bending and defects elimination via a Ag-graded active layer for efficient (Cu, Ag)2ZnSn(S, Se)4 solar cells10.1039/C7EE01405H ↗
17. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
18. Development of CZTS-based thin film solar cells10.1016/j.tsf.2008.11.002 ↗
19. Large efficiency improvement in Cu2ZnSnSe4 solar cells by introducing a superficial Ge nanolayer10.1002/aenm.201501070 ↗
20. Characterization of defects in 9.7% efficient Cu2ZnSnSe4-CdS-ZnO solar cells10.1063/1.4826448 ↗
21. Physical and electrical characterization of high-performance Cu2ZnSnSe4 based thin film solar cells10.1016/j.tsf.2014.10.052 ↗
22. Cu2ZnSnSe4 thin film solar cells produced by selenisation of magnetron sputtered precursors10.1002/pip.886 ↗
23. Effect of solid-H2S gas reactions on CZTSSe thin film growth and photovoltaic properties of a 12.62% efficiency device10.1039/C9TA08310C ↗
24. Cu2ZnSn(SxSe1-x)4 thin film solar cell with high sulfur content (x approximately 0.4) and low VOC deficit prepared using a postsulfurization process10.1016/j.solmat.2017.09.036 ↗
25. Earth-abundant element photovoltaics directly from soluble precursors with high yield using a non-toxic solvent10.1002/aenm.201100140 ↗
26. Vacuum-free preparation of 7.5% efficient Cu2ZnSn(S, Se)4 solar cells based on metal salt precursors10.1016/j.solmat.2013.06.021 ↗
27. Fabrication of a Cu2ZnSn(S, Se)4 photovoltaic device by a low-toxicity ethanol solution process10.1021/am402558a ↗
28. Elemental precursor solution processed (Cu1-xAgx)2ZnSn(S, Se)4 photovoltaic devices with over 10% efficiency10.1021/acsami.7b03944 ↗
29. Facile and low-cost sodium-doping method for high-efficiency Cu2ZnSnSe4 thin film solar cells10.1021/acs.jpcc.5b06381 ↗
30. Real-time observation of Cu2ZnSn(S, Se)4 solar cell absorber layer formation from nanoparticle precursors10.1039/c3cp53373e ↗
31. Investigation of local compositional uniformity in Cu2ZnSn(S, Se)4 thin film solar cells prepared from nanoparticle inks10.1039/C4TA02205J ↗
32. Cu2ZnSn(S, Se)4 thin film absorbers based on ZnS, SnS and Cu3SnS4 nanoparticle inks: Enhanced solar cells performance by using a two-step annealing process10.1016/j.solmat.2014.08.024 ↗
33. Effect of nanocrystal size and carbon on grain growth during annealing of copper zinc tin sulfide nanocrystal coatings10.1021/acs.chemmater.6b05058 ↗
34. Effects of selenization conditions on microstructure evolution in solution processed Cu2ZnSn(S, Se)4 solar cells10.1016/j.solmat.2019.03.024 ↗
35. Enhancement of the photovoltaic performance of Cd-alloyed Cu2ZnSn(S, Se)4 films based on a low-cost water-based solution process10.1016/j.jallcom.2021.159898 ↗
36. Performance improvement of Cu2ZnSn(S, Se)4 solar cells by introducing the tiny rare-earth Ce3+10.1016/j.apsusc.2022.155439 ↗
37. Improving the performance of low-cost water-based solution-synthesised Cu2ZnSn1-xGex(S, Se)4 absorber thin films by germanium doping10.1016/j.ceramint.2020.07.039 ↗
38. Stress relaxation behavior of soda-lime glass between the transformation and softening temperatures10.1016/0022-3093(74)90035-0 ↗
39. Relaxation behaviors of Vickers indentations in soda-lime glass10.2109/jcersj2.116.864 ↗
40. Influence of extra trace Mn-doping on the properties of Cu2ZnSn(S, Se)4 absorber layer10.1016/j.optmat.2020.110707 ↗
41. Boosting the electrical properties of Cu2ZnSn(S, Se)4 solar cells via low amounts of Mg substituting Zn10.1021/acsaem.0c02121 ↗
42. Optimizing the properties of Cu2ZnSn(S, Se)4 solar cells via cationic substitution with trace Ca10.1016/j.jallcom.2022.166070 ↗