journal article·2023-10

Microstructure and hydrogen transport behaviour of Nb5Ti58Fe35M2 alloy membranes

Erhu Yan, Zirui Zhou, Renjun Huang, Kexiang Zhang, Shuo Zhang, Yihao Wang, Yuncan Chen, Yongjin Zou, Hailiang Chu, Huanzhi Zhang, Fen Xu, Lixian Sun

Publisher page

Abstract

The dual-phase alloy developed based on Group 5B metals (V, Nb, Ta) is a promising material for hydrogen purification. Especially, Nb-Ti-Fe dual-phase alloys have attracted much attention due to their dual advantages, i.e., low price and good hydrogen permeability. Nevertheless, the challenge of developing higher comprehensive performance alloys in the face of the needs of practical applications remains. To address this need, a series of alloys with the formula Nb 5Ti 58Fe 35M 2 (atom %), where M is W, Mo, Cr, Pd, Cu, Al, Co, or Ni, was devised and prepared, and their microstructure characteristics and hydrogen transport properties were investigated. The results show that alloying of different elements will lead to great changes in permeability and hydrogen embrittlement (HE), whereas the structure type is less dependent on element types. Specifically, introducing doping elements W, Mo, Cr, or Co deteriorates the performance, especially the resistance to HE. Similarly, adding Pd, Al, or Ni reduces permeability but increases HE resistance. By contrast, the alloying of Cu improves both hydrogen permeability and hydrogen brittleness. Nb 5Ti 58Fe 35Cu 2 shows a high permeability of 4.32 × 10 −8 mol H 2 m −1s −1Pa −0.5 at 673 K, which is better than our newly developed Nb 5Ti 60Fe 35 alloy. In addition, this paper also demonstrated that a change of phase size and morphology arising from alloying has greater influence on permeability than a change in the orientation relationship (OR) between the phases.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Hydrogen Storage and Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Nb-Pd-Ti BCC thin films for hydrogen separation10.1016/j.jallcom.2018.10.126 ↗
2. Enhanced hydrogen storage properties of 2LiNH2/MgH2 through the addition of Mg(BH4)210.1016/j.jallcom.2017.02.045 ↗
3. Influence of Ni/Ti ratio and Nb addition on martensite transformation behavior of NiTiNb alloys10.1016/j.jallcom.2019.02.330 ↗
4. Hydrogen permeation in a palladium membrane tube: Impacts of outlet and vacuum degree10.1016/j.ijhydene.2021.07.182 ↗
5. Hydrogen permeation and transmission electron microscope observations of V–Al alloys10.1016/S0925-8388(02)01273-2 ↗
6. Hydrogenation properties of Mg17Al12 doped with alkaline-earth metal (Be, Ca, Sr and Ba)10.1016/j.jallcom.2018.10.027 ↗
7. Hydrogen permeation characteristics of vanadium–aluminium alloys10.1016/S1359-6462(02)00218-X ↗
8. Ductile Nb alloys with reduced density and cost10.1016/j.jallcom.2019.151685 ↗
9. Effects of Mo alloying on the structure and hydrogen-permeation properties of Nb metal10.1016/j.jallcom.2018.01.076 ↗
10. Ta-W alloy for hydrogen permeable membranes10.2320/matertrans.MA201007 ↗
11. Additive manufacturing of W-12Ta(wt%) alloy: processing and resulting mechanical properties10.1016/j.jallcom.2021.159193 ↗
12. Design of hydrogen permeable Nb–Ni–Ti alloys by correlating the microstructures, solidification paths and hydrogen permeability10.1016/j.ijhydene.2013.12.060 ↗
13. Hydrogen permeability in Nb–Ti–Ni alloys containing much primary (Nb,Ti) phase10.2320/matertrans.46.2253 ↗
14. Relationship between hydrogen permeation and microstructure in Nb–TiCo two-phase alloys10.1016/j.jallcom.2015.01.248 ↗
15. Nb-TiCo multiphase alloys: the significant impact of Ti/Co ratio on solidification path, microstructure and hydrogen permeability
16. Hydrogen permeability of multiphase V–Ti–Ni metallic membranes10.1016/j.matlet.2006.05.078 ↗
17. Hydrogen permeable Ta–Ti–Ni duplex phase alloys with high resistance to hydrogen embrittlement10.1016/j.jallcom.2007.06.061 ↗
18. Design of hydrogen separatinwg Nb-Ti-Fe membranes with high permeability and low cost10.1016/j.seppur.2020.117945 ↗
19. Thermal stability, glass-forming ability and hydrogen permeability of amorphous Ni64Zr36−XMX (M=Ti, Nb, Mo, Hf, Ta or W) membranes10.1016/j.seppur.2008.10.051 ↗
20. Asymmetric layered vanadium membranes for hydrogen separation10.1016/j.memsci.2015.03.048 ↗
21. Non-Pd BCC alloy membranes for industrial hydrogen separation10.1016/j.memsci.2010.06.068 ↗
22. Microstructure and hydrogen transport properties of (V90Cr5Al5)90Cu10 alloy membranes10.1016/j.jallcom.2022.168684 ↗
23. Development of Nb35Mo5Ti30Ni30 alloy membrane for hydrogen separation applications10.1016/j.memsci.2018.02.052 ↗
24. Hydrogen transport behavior of as-cast, cold rolled and annealed Nb40Ti30Co30 alloy membranes10.1016/j.memsci.2016.04.055 ↗
25. Microstructural change-induced lowering of hydrogen permeability in eutectic Nb–TiNi alloy10.1016/j.memsci.2010.01.029 ↗
26. Consistent description of hydrogen permeability through metal membrane based on hydrogen chemical potential10.1016/j.ijhydene.2014.03.123 ↗
27. Mechanical properties of Nb-Ti-Ni alloy membranes for hydrogen permeation10.1016/S1875-5372(16)30128-X ↗
28. Improving hydrogen permeability and sustainability of Nb30Ti35Co35 eutectic alloy membrane by substituting Co using Fe10.1016/j.ijhydene.2020.08.101 ↗
29. Design and characterizations of novel Nb-ZrCo hydrogen permeation alloys for hydrogen separation applications10.1016/j.matchemphys.2018.03.059 ↗
30. Hydrogen embrittlement in different materials: a review10.1016/j.ijhydene.2018.09.201 ↗
31. Enhancing the catalytic activity of Ni-based amorphous alloy membrane surfaces10.1016/j.memsci.2014.03.056 ↗
32. Effect of Mo and Nb on mechanical properties and hydrogen embrittlement of hot-rolled medium-Mn steels10.1016/j.msea.2022.143108 ↗
33. Effect of single atomic layer graphene film on the thermal stability and hydrogen permeation of Pd-coated Nb composite membrane10.1016/j.ijhydene.2021.12.132 ↗
34. Hydrogen permeability degradation of Pd-coated Nb□TiNi alloy caused by its interfacial diffusion10.1016/j.apsusc.2015.10.206 ↗
35. A comparison of the performance and stability of Pd/BCC metal composite membranes for hydrogen purification10.1016/j.ijhydene.2014.09.094 ↗
36. Hydrogen solubility in Zr–Nb alloys10.1016/j.scriptamat.2022.114652 ↗
37. Tailoring the hydrogen transport properties of highly permeable Nb51W5Ti23Ni21 alloy membrane by Pd substitution10.1016/j.ijhydene.2021.12.021 ↗
38. The influence of surface corrosion on microstructure and hydrogen permeability of Nb-Hf-Co dual-phase alloys
39. Effects of rolling and annealing on hydrogen permeability and crystal orientation in Nb-TiNi two-phase alloys10.1016/j.ijhydene.2019.07.021 ↗
40. Accelerated diffusion of hydrogen along grain boundaries in nickel10.1016/1359-6454(95)00446-7 ↗
41. First-principles study of hydrogen trapping and diffusion at grain boundaries in γ-Fe10.1016/j.ijhydene.2020.11.238 ↗
42. Grain size and grain-boundary effects on diffusion and trapping of hydrogen in pure nickel10.1016/j.actamat.2012.09.004 ↗
43. Mechanisms for adsorption, dissociation and diffusion of hydrogen in hydrogen permeation barrier of α-Al2O3: The role of crystal orientation10.1016/j.ijhydene.2013.10.063 ↗
44. An understanding of hydrogen embrittlement in nickel grain boundaries from first principles10.1016/j.matdes.2021.110283 ↗
45. Effect of hydrogen trapping on hydrogen permeation in a 2205 duplex stainless steel: Role of austenite–ferrite interface10.1016/j.corsci.2022.110332 ↗
46. Hydrogen-induced intergranular failure in nickel revisited10.1016/j.actamat.2012.01.040 ↗
47. Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels10.1016/j.ijhydene.2018.04.241 ↗
48. Effect of grain size on the hydrogen embrittlement sensitivity of a precipitation strengthened Fe–Ni based alloy10.1016/j.msea.2013.11.062 ↗
49. Electronic structure of β-NiOOH with hydrogen vacancies and implications for energy conversion applications10.1557/mrc.2017.26 ↗
50. Hydrogen transport by dislocation movement in austenitic steel10.1016/j.msea.2019.138059 ↗
51. First-principle investigation of hydrogen solubility and diffusivity in transition metal-doped vanadium membranes and their mechanical properties10.1016/j.jallcom.2019.07.063 ↗
52. Grain boundary carbides as hydrogen diffusion barrier in a Fe-Ni alloy: a thermal desorption and modelling study10.1016/j.matdes.2018.10.012 ↗
53. First-principles study of the insertion and diffusion of interstitial atoms (H, C, N and O) in nickel10.1016/j.jallcom.2019.153555 ↗
54. Theoretical investigation of molybdenum/tungsten-vanadium solid solution alloy membranes: thermodynamic stability and hydrogen permeation10.1016/j.memsci.2020.118200 ↗
55. Hydrogen solubility and permeability of V–W–Mo alloy membrane for hydrogen separation and purification10.1016/j.jallcom.2013.03.144 ↗
56. Probing the surface structure via the adsorbed hydrogen atoms – the case of Cu(4 1 0)10.1016/j.apsusc.2020.146433 ↗
57. Strength and ductility of Bi-modal Cu10.1002/adem.201100019 ↗
58. Valence of the elemental transition metals10.1071/PH99039 ↗
59. Ab initio study of formation energy and magnetism of sigma phase in Cr–Fe and Cr–Co systems10.1016/j.intermet.2009.07.018 ↗
60. Low temperature synthesis of new highly graphitized N-doped carbon for Pt fuel cell supports, satisfying DOE 2025 durability standards for both catalyst and support10.1016/j.apcatb.2022.122179 ↗