journal article·2023-09

Effect of Ti content on the cell structure and compressive and energy absorption properties of Al3Ti/Al6061 foam composite

Wenchang Zhang, Xinbing Zheng, Changshun Zhu, Wei Long

Publisher page

Abstract

Aluminium alloy foams are often used as cushioning parts for automobiles because of their excellent energy absorption properties and lightweight characteristics. Their energy absorption properties mainly depend on the cell structure of the foam, but the cell structure of aluminium alloy foams prepared by the powder metallurgy method is usually difficult to control. In this work, Al 3 Ti/Al6061 foam composite (AT-FC) was prepared by powder metallurgy using TiH 2 as the blowing agent and a mixture of Al6061 and Ti powder as the foaming matrix. The effects of different Ti contents on the cell structure, cell distribution and morphology of AT-FC were focused on, and their mechanical properties under quasi-static compressive loading were investigated. The experimental results showed that different Ti contents could regulate the cell size and improve the cell morphology and distribution, in which AT-FC contains 7.5 wt% Ti had the best cell structure with an average cell size of about 1.56 mm and an average circularity of 0.82. By comparing the compressive yield strength, energy absorption and specific energy absorption of AT-FC with different Ti contents, the AT-FC with 10 wt% Ti had the best compressive yield strength of 8.96 MPa and AT-FC with 7.5 wt% Ti had the best energy absorption of 6.50 MJ/m 3.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. High temperature deformation behavior of closed cell ZnAl27 hybrid foam made through stir casting technique10.1016/j.msea.2018.06.044 ↗
2. Characterization and analysis of compression load behaviour of aluminium alloy foam under the diverse strain rate10.1016/j.jallcom.2015.09.255 ↗
3. Compressive behavior of closed-cell aluminum alloy foams at medium strain rates10.1016/j.msea.2010.12.059 ↗
4. Improved stability of aluminum foam through heat treatment of foamable precursor10.1007/s12540-019-00419-8 ↗
5. Foaming process and properties of 6063 aluminum foams by melt foaming method10.2320/matertrans.M2016244 ↗
6. Effect of cenosphere particle size and relative density on the compressive deformation behavior of aluminum-cenosphere hybrid foam10.1016/j.matdes.2016.12.078 ↗
7. Detailed analysis of closed-cell aluminum alloy foam internal structure changes during compressive deformation10.1002/adem.201800164 ↗
8. Controlled fabrication of porous metals from the nanometer to the macroscopic scale10.1039/C4MH00244J ↗
9. The effect of in situ intermetallic formation on Al-Sn foaming behavior10.1007/s11661-014-2313-2 ↗
10. Structural and physico-mechanical characterization of closed-cell aluminum foams with different zinc additions10.1515/secm-2016-0307 ↗
11. Effect of Cu and Sn additions on the cellular structure of Al–Si–Mg alloys foaming at low temperature (≤600 °C)10.1016/j.compositesb.2022.109693 ↗
12. Effects of alumina (Al2O3) addition on the cell structure and mechanical properties of 6061 foams10.1557/jmr.2013.187 ↗
13. Impression creep behaviour of ultrasonically processed in-situ Al3Ti reinforced aluminium composite10.1016/j.msea.2018.07.017 ↗
14. Synthesis and mechanical properties of novel Ti-(SiCf/Al3Ti) ceramic-fiber-reinforced metal-intermetallic-laminated (CFR-MIL) composites10.1016/j.jallcom.2017.06.057 ↗
15. Fabrication of Al-3.7 Pct Si-0.18 Pct Mg foam strengthened by AlN particle dispersion and its compressive properties10.1007/s11661-010-0247-x ↗
16. Chemical reaction mechanism, microstructural characteristics and mechanical properties of in situ (α-Al 2 O 3 +ZrB 2)/Al composites10.1016/j.matchemphys.2017.04.039 ↗
17. Processing and tensile properties of A356 composites containing in situ small-sized Al3Ti particulates10.1016/j.msea.2017.11.005 ↗
18. Evaluation of shape of graphite particles in cast irons by a shape factor10.1016/j.matpr.2016.03.006 ↗
19. Cell structure refining mechanism of pure aluminum foam with fine cell structure
20. Relationship between foam stabilization and physical properties of particles on aluminum foam production10.2320/matertrans.F-M2011817 ↗
21. Why are metal foams stable?10.1063/1.2357931 ↗
22. In situ observation on bubble behavior of solidifying Al-Ni alloy under the interference of intermetallic compounds10.1007/s11661-018-4818-6 ↗
23. Effects of viscosity on cellular structure of foamed aluminium in foaming process10.1023/A:1004715926692 ↗
24. Processing and characterization of in-situ TiB2 stabilized closed cell aluminium alloy composite foams10.1016/j.matdes.2016.03.153 ↗
25. Kinetics of coalescence in liquid aluminium foams10.1039/c1sm05831b ↗
26. Effect of parametric variations on the local compression deformation of aluminum foam sandwich panels10.2320/matertrans.M2016427 ↗
27. Aluminum melt foam processing for light-weight structures10.1080/10426910701236072 ↗
28. Compressive behavior of SiCp/AlSi9Mg composite foams10.1016/j.jallcom.2007.06.041 ↗
29. Influence of Cu, Zn and Si alloying elements on Al alloy foams produced using Mg blowing agent10.1007/s10853-020-05381-0 ↗
30. The effect of cooling rate on the structure and properties of closed-cell aluminium foams10.1016/j.actamat.2010.05.039 ↗
31. Effect of strain rate and relative density on compressive deformation behaviour of closed cell aluminum–fly ash composite foam10.1016/j.matdes.2008.06.059 ↗
32. Compressive deformation behavior and strain rate sensitivity of Al-cenosphere hybrid foam with mono-modal, bi-modal and tri-modal cenosphere size distribution10.1016/j.matchar.2018.08.011 ↗
33. Compressive deformation and corrosion behaviour of moderate to highly porous Ti4Al4Co (wt%) alloy foam10.1016/j.matchemphys.2020.123718 ↗
34. Investigating the internal structure and mechanical properties of graphene nanoflakes enhanced aluminum foam10.1016/j.matdes.2017.08.031 ↗
35. Effect of solutionizing time on microstructure, mechanical properties and energy absorption capacity of Al2024-B4CP composite foam10.1007/s12666-022-02563-z ↗
36. Compressive behavior of 7075 Al-SiO2 waste particle composite foams produced with recycled aluminum cans10.1007/s11665-020-04858-y ↗
37. Effects of cell size on quasi-static compressive properties of Mg alloy foams10.1016/j.matdes.2011.07.066 ↗
38. Variation of quasi-static and dynamic compressive properties in a single aluminium foam block10.1016/j.msea.2014.08.002 ↗
39. Compressive properties of A356 closed-cell aluminum foamed with a CaCO3 foaming agent without stabilizer particles10.1007/s12540-020-00807-5 ↗
40. Compressive properties and energy absorption of aluminum composite foams reinforced by in-situ generated MgAl 2 O 4 whiskers10.1016/j.msea.2015.07.091 ↗
41. Compressive response and energy absorption of foamed A359–Al2O3 particle composites10.1016/j.jallcom.2009.07.013 ↗
42. Effect of in situ Al3Zr particles on controlling the pore morphology of Al6061 alloy foams
43. Customised heat treatment of TiH2 for the foaming of aluminium alloys