journal article·2023-09

A hierarchical SiO2-microsphere-graphene host enabling superior long-term cycling for lithium-metal anodes

Zekai Lv, Chen Xie, Jiahui Zhou, Guangling Wei, Yixin Zhang, Yan Chen, Feng Wu, Man Xie

Publisher page

Abstract

Metallic lithium (Li) is considered to be one of the most promising anodes for Li-ion batteries due to its high theoretical capacity and low reduction potential. However, dendritic growth and substantial volume variations during battery operation make it difficult for commercialization. Here, a graphene and SiO 2 composites material was presented as a lithiophilic host to enable superior long-term cycling for Li-metal anode. The porous skeleton of graphene with excellent electronic conductivity can effectively reduce the actual current density and suppress the volume expansion. And the SiO 2 particles with excellent ionic conductivity can significantly suppress the growth of Li dendrites and regulate the nucleation sites. So doping SiO 2 nanoparticles between graphene sheets can significantly suppress the growth of Li dendrites and the volume expansion effect of metallic Li deposition, while also providing good electrochemical performance. Benefitting from these synergistic effects, the Li-GF@SiO 2 battery exhibits excellent electrochemical reversibility over 500 cycles depositing 1 mAh cm −2 of metallic Li at a current density of 1 mA cm −2, and the coulombic efficiency of the Li-GF@SiO 2 battery is still as high as 97%, but the Li-Cu battery decays after 75 cycles. So this hierarchical SiO 2 -microsphere-graphene host demonstrates great potential for Li batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Liang · InfoMat · 2019 · 1 · 610.1002/inf2.12000 ↗
2. Rechargeable batteries: regulating electronic and ionic transports for high electrochemical performance10.1002/admt.202101107 ↗
3. Current status and challenges for automotive battery production technologies10.1038/s41560-018-0130-3 ↗
4. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
5. Key aspects of lithium metal anodes for lithium metal batteries10.1002/smll.201900687 ↗
6. Advancing lithium metal batteries10.1016/j.joule.2018.03.008 ↗
7. A copper-clad lithiophilic current collector for dendrite-free lithium metal anodes10.1039/C9TA11237E ↗
8. Lithium nitrate regulated sulfone electrolytes for lithium metal batteries10.1002/anie.202009575 ↗
9. Liu · ACS Appl. Energy Mater. · 2018 · 1 · 186410.1021/acsaem.8b00348 ↗
10. Synergism of Al-containing solid electrolyte interphase layer and Al-based colloidal particles for stable lithium anode10.1016/j.nanoen.2017.04.056 ↗
11. Low-volume-change, dendrite-free lithium metal anodes enabled by lithophilic 3D matrix with LiF-enriched surface10.1039/C8TA10779C ↗
12. Oxygen and nitrogen co-doped porous carbon granules enabling dendrite-free lithium metal anode10.1016/j.ensm.2018.08.018 ↗
13. Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions10.1038/s41565-019-0427-9 ↗
14. N-doped graphene modified 3D porous Cu current collector toward microscale homogeneous Li deposition for Li metal anodes
15. Oxygen and nitrogen co-doped porous carbon granules enabling dendrite-free lithium metal anode10.1016/j.ensm.2018.08.018 ↗
16. A copper-clad lithiophilic current collector for dendrite-free lithium metal anodes10.1039/C9TA11237E ↗
17. A fiber-based 3d lithium host for lean electrolyte lithium metal batteries10.1002/advs.202104829 ↗
18. Synergistic effect of 3D current collectors and ALD surface modification for high coulombic efficiency lithium metal anodes
19. Lithiophilic 3D nanoporous nitrogen-doped graphene for dendrite-free and ultrahigh-rate lithium-metal anodes10.1002/adma.201805334 ↗
20. A review of composite lithium metal anode for practical applications
21. SiO2-coated sulfur particles with mildly reduced graphene oxide as a cathode material for lithium-sulfur batteries10.1039/C4NR07663J ↗
22. Quartz (SiO2): a new energy storage anode material for Li-ion batteries10.1039/c2ee00003b ↗
23. SiO2‐enhanced structural stability and strong adhesion with a new binder of konjac glucomannan enables stable cycling of silicon anodes for lithium‐ion batteries10.1002/aenm.201800434 ↗
24. Lithiation of SiO2 in Li-ion batteries: in situ transmission electron microscopy experiments and theoretical studies10.1021/nl503776u ↗
25. Babaa · Mater. Today · 2017 · 4 · 4542
26. Zhao · Nanoscale Res. Lett. · 2017 · 12 · 710.1186/s11671-016-1776-z ↗
27. Interface properties of metal/graphene heterostructures studied by micro-raman spectroscopy10.1021/jp106188w ↗
28. Sasidharan · J. Mater. Chem. · 2011 · 21 · 1388110.1039/c1jm10864f ↗
29. Microsphere‐like SiO2/MXene hybrid material enabling high performance anode for lithium ion batteries10.1002/smll.201905430 ↗
30. Preparation of functionalized graphene/linear low density polyethylene composites by a solution mixing method10.1016/j.carbon.2010.10.031 ↗
31. Insights into the electrochemical reduction products and processes in silica anodes for next‐generation lithium‐ion batteries10.1002/aenm.202001826 ↗
32. Self-healing SEI enables full-cell cycling of a silicon-majority anode with a coulombic efficiency exceeding 99.910.1039/C6EE02685K ↗
33. Carbon-coated SiO2 nanoparticles as anode material for lithium ion batteries10.1016/j.jpowsour.2011.08.009 ↗
34. Insights into the Li diffusion mechanism in Si/C composite anodes for lithium-ion batteries10.1021/acsami.1c03366 ↗
35. Focusing on the subsequent coulombic efficiencies of SiO(x): initial high-temperature charge after over-capacity prelithiation for high-efficiency SiO(x)-based full-cell battery10.1021/acsami.2c01392 ↗