The intrinsically quasi-isotropic tensile properties of as-fabricated Al-Mg-Si-Sc-Zr alloy produced by selective laser melting
Source abstract
Abstract
Mechanical anisotropy is among the most concerned properties for selective laser melting produced metals, such as steels and titanium alloys, but is rarely investigated for high-strength Al alloys. In this study, crack-free high-strength Al-Mg-Si-Sc-Zr was prepared by selective laser melting. Systematical tensile tests revealed that Al-Mg-Si-Sc-Zr has intrinsically quasi-isotropic tensile properties. Uniform elongations in horizontal and building directions are comparable and the difference between the two tensile strengths is less than 3%. Al-Mg-Si-Sc-Zr exhibits bi-modal microstructures consisting of 39 vol% equiaxed ultrafine grains and 61 vol% columnar grains. The presence of equiaxed ultrafine grains interrupts epitaxial growth of columnar grains and thus prevents the development of the fiber texture intensity. The tiny grain size and Mg 2 Si stripes on grain boundaries make equiaxed ultrafine grains brittle and susceptible to cavity nucleation and intergranular cracking. A weak fiber texture and randomly orientated cracking-prone equiaxed ultrafine grains endow Al-Mg-Si-Sc-Zr with intrinsically quasi-isotropic tensile properties.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. 3D printing of aluminium alloys: additive manufacturing of aluminium alloys using selective laser melting10.1016/j.pmatsci.2019.100578 ↗
2. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties10.1016/j.pmatsci.2015.03.002 ↗
3. Microstructural features of Sc- and Zr-modified Al-Mg alloys processed by selective laser melting10.1016/j.matdes.2016.11.040 ↗
4. Highly anisotropic steel processed by selective laser melting10.1007/s11663-013-9875-z ↗
5. Anisotropic mechanical behavior of AlSi10Mg parts produced by selective laser melting10.1007/s11837-016-2230-5 ↗
6. Metal additive manufacturing: a review10.1007/s11665-014-0958-z ↗
7. Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: a critical review10.1016/j.matdes.2017.11.021 ↗
8. Effects of microstructure and internal defects on mechanical anisotropy and asymmetry of selective laser-melted 316L austenitic stainless steel10.1016/j.msea.2019.138152 ↗
9. Anisotropic mechanical behavior of biomedical Ti-13Nb-13Zr alloy manufactured by selective laser melting10.1016/j.jallcom.2018.05.179 ↗
10. Anisotropic tensile and actuation properties of NiTi fabricated with selective laser melting10.1016/j.msea.2018.03.072 ↗
11. Anisotropy of nickel-based superalloy K418 fabricated by selective laser melting10.1016/j.pnsc.2018.07.001 ↗
12. Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing10.1016/j.msea.2017.06.098 ↗
13. Alloys · 1995
14. Recent development in aluminium alloys for aerospace applications10.1016/S0921-5093(99)00674-7 ↗
15. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development10.1016/j.matdes.2014.09.044 ↗
16. A novel method to 3D-print fine-grained AlSi10Mg alloy with isotropic properties via inoculation with LaB6 nanoparticles
17. Fracture resistance of AlSi10Mg fabricated by laser powder bed fusion10.1016/j.actamat.2021.116869 ↗
18. Columnar to equiaxed transition in Al-Mg(-Sc)-Zr alloys produced by selective laser melting10.1016/j.scriptamat.2017.10.021 ↗
19. 3D printing of high-strength aluminium alloys10.1038/nature23894 ↗
20. Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys10.1016/j.jallcom.2018.06.032 ↗
21. Spierings, et al., 2017. SLM-processed Sc- and Zr- modified Al-Mg alloy: Mechanical properties and microstructural effects of heat treatment, Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing (2017).10.1016/j.msea.2017.06.089 ↗
22. Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy10.1016/j.scriptamat.2017.02.036 ↗
23. On the castability of Al-Si/SiC particle-reinforced metal-matrix composities. Factors affecting fluidity and soundness10.1016/0266-3538(93)90016-A ↗
24. Influence of the solidification path of AlMgSi aluminium alloys on the critical strain rate during remote laser beam welding10.1080/13621718.2019.1633753 ↗
25. Reduction of the hot cracking susceptibility of laser beam welds in AlMgSi alloys by increasing the number of grain boundaries10.1080/13621718.2018.1534775 ↗
26. Effect of Al3(Sc, Zr) and Mg2Si precipitates on microstructure and tensile properties of selective laser melted Al-14.1Mg-0.47Si-0.31Sc-0.17Zr alloy10.1016/j.intermet.2020.106822 ↗
27. Developing a high-strength Al-Mg-Si-Sc-Zr alloy for selective laser melting: Crack-inhibiting and multiple strengthening mechanisms10.1016/j.actamat.2020.03.060 ↗
28. Intrinsic fracture toughness of bulk nanostructured Cu with nanoscale deformation twins10.1016/j.scriptamat.2017.01.032 ↗
29. In-situ synthesis of aluminum matrix nanocomposites by selective laser melting of carbon nanotubes modified Al-Mg-Sc-Zr alloys10.1016/j.jallcom.2021.162047 ↗
30. Changing the alloy composition of Al7075 for better processability by selective laser melting10.1016/j.jmatprotec.2016.08.003 ↗
31. Microstructures and strengthening mechanisms of high Fe containing Al–Mg–Si–Mn–Fe alloys with Mg, Si and Mn modified
32. An approach to predict the residual stress and distortion during the selective laser melting of AlSi10Mg parts10.1007/s00170-018-2207-3 ↗
33. Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation10.1016/j.actamat.2007.06.043 ↗
34. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting10.1016/j.actamat.2016.06.009 ↗
35. Selective laser melting of Invar 36: microstructure and properties10.1016/j.actamat.2015.10.020 ↗
36. Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum10.1016/j.actamat.2013.04.036 ↗
37. Effect of nano-TiB 2 particles on the anisotropy in an AlSi10Mg alloy processed by selective laser melting10.1016/j.jallcom.2019.05.279 ↗
38. Principles of solidification10.1016/S1369-7021(11)70218-8 ↗
39. Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder10.1016/j.actamat.2012.11.052 ↗
40. D.R. Askeland, P. Fulay, 2013. Essentials of Materials Science and Engineering, 2013.
41. Origin of non-uniform plasticity in a high-strength Al-Mn-Sc based alloy produced by laser powder b e d fusion10.1016/j.jmst.2021.06.042 ↗
42. Making selective-laser-melted high-strength Al-Mg-Sc-Zr alloy tough via ultrafine and heterogeneous microstructure10.1016/j.scriptamat.2021.114052 ↗
43. Selective laser melting of a high strength Al-Mn-Sc alloy: Alloy design and strengthening mechanisms10.1016/j.actamat.2019.04.014 ↗
44. The premature necking of twinning-induced plasticity steels10.1016/j.actamat.2017.06.042 ↗
45. C. Tekoğlu, et al., 2015. On localization and void coalescence as a precursor to ductile fracture, Philosophical Transactions of the Royal Society of London A: Mathematical, Physical and Engineering Sciences (2015).10.1098/rsta.2014.0121 ↗
46. D. Hull, 1999. Fractography: observing, measuring, and interpreting fracture surface topography, Fractography: observing, measuring, and interpreting fracture surface topography1999.
47. Effects of dispersoid particles on toughness of high-strength aluminium alloys10.1179/030634581790426930 ↗