journal article·2023-06

The chromization on hot-rolled Fe40Mn20Cr20Ni20 high-entropy alloys by pack cementation

Rui Yang, Aidong Lan, Huijun Yang, Xi Jin, Junwei Qiao

Publisher page

Abstract

As a surface modification technique, chromization is often used in steels to improve their wear, corrosion, and oxidation resistances. High-entropy alloys (HEAs) with excellent properties can be applied in extreme environments, perhaps to further improve their resistance to external environments by chromization. In this work, the chromization of hot-rolled Fe 40Mn 20Cr 20Ni 20 HEA was carried out by pack cementation. A chromized coating of 120 µm with the body-centered cubic (BCC) structure and a diffusion layer of 30 µm were obtained by chromizing at 1473 K for 12 h. Based on the growth kinetics of the coating, the relationship between the thickness of the chromized coating and chromized temperature as well as the time was modeled to visualize. After chromization, due to the higher chromium content of the coating, the Vickers hardness of was increased from 150 HV0.1 of hot-rolled HEA to more than 500 HV0.1, the wear rate was significantly reduced, and the dominant wear mechanisms for both hot-rolled and chromized HEAs under three test environments involved abrasion and adhesive wears. Besides, the corrosion resistance was promoted in NaCl solution (3.5 wt%). Thereby, the present work provides guidances for chromization on HEAs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
3. Defect properties in a VTaCrW equiatomic high entropy alloy (HEA) with the body centered cubic (bcc) structure10.1016/j.jmst.2019.10.025 ↗
4. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
5. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
6. Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
7. Alloy design and properties optimization of high-entropy alloys10.1007/s11837-012-0366-5 ↗
8. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
9. Refractory high-entropy alloys10.1016/j.intermet.2010.05.014 ↗
10. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
11. Microstructure and wear behavior of AlxCo1.5CrFeNi1.5Tiy high-entropy alloys10.1016/j.actamat.2011.06.041 ↗
12. Microstructure and electrochemical properties of high entropy alloys—a comparison with type-304 stainless steel10.1016/j.corsci.2004.11.008 ↗
13. Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties10.1063/1.2734517 ↗
14. Microstructure and compressive properties of AlCrFeCoNi high entropy alloy10.1016/j.msea.2008.01.064 ↗
15. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
16. A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties10.1016/j.matlet.2014.05.134 ↗
17. M.A. Hemphill, T. Yuan, G.Y. Wang, J.W. Yeh, C.W. Tsai, A. Chuang, P.K. Liaw, Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys, Acta Mater. 60 (2012) 5723–5734. https://doi.org/10.1016/j.actamat.2012.06.046.10.1016/j.actamat.2012.06.046 ↗
18. Damage accumulation in ion-irradiated Ni-based concentrated solid-solution alloys10.1016/j.actamat.2016.02.048 ↗
19. A novel bulk eutectic high-entropy alloy with outstanding as-cast specific yield strengths at elevated temperatures10.1016/j.scriptamat.2021.114132 ↗
20. Microstructure and properties of CoCrFeNiAlx (x=0.1, 0.5, 1) high-entropy alloys enhanced by laser surface remelting10.1016/j.matchar.2021.111717 ↗
21. Powder-pack boronizing of CoCrFeNiAl0.5Nb0.5 HEA: Modeling of kinetics, microstructural, mechanical, and tribological characterizations10.1016/j.jallcom.2022.167310 ↗
22. Improved tribological behavior of plasma-nitrided AlCrTiV and AlCrTiVSi high-entropy alloy films10.1016/j.triboint.2021.107195 ↗
23. A novel high-entropy alloy composite coating with core-shell structures prepared by plasma cladding10.1016/j.vacuum.2020.109905 ↗
24. Y.H. Wu, H.J. Yang, R.P. Guo, X.J. Wang, X.H. Shi, P.K. Liaw, J.W. Qiao, Tribological behavior of boronized Al0.1CoCrFeNi high-entropy alloys under dry and lubricated conditions, Wear 460–461 (2020) 203452. https://doi.org/10.1016/j.wear.2020.203452.10.1016/j.wear.2020.203452 ↗
25. Effect of environments and normal loads on tribological properties of nitrided Ni45(FeCoCr)40(AlTi)15 high-entropy alloys10.1016/j.jmst.2019.08.051 ↗
26. Microstructure and wear properties of nitrided AlCoCrFeNi high-entropy alloy10.1016/j.matchemphys.2017.05.029 ↗
27. Hard iron boride (Fe2B) on 99.97wt% pure iron10.1016/j.vacuum.2006.01.022 ↗
28. Recent trends in laser cladding and surface alloying10.1016/j.optlastec.2020.106619 ↗
29. Wear and oxidation performances of low temperature aluminized IN60010.1016/j.surfcoat.2022.128295 ↗
30. Insights into the microstructure characteristics, mechanical properties and tribological behaviour of gas-phase chromized coating on GCr15 bearing steel10.1016/j.surfcoat.2022.128605 ↗
31. The characterization of vanadium boride coatings on AISI 8620 steel10.1016/j.surfcoat.2004.07.120 ↗
32. Forming protective alumina scale for ductile refractory high-entropy alloys via aluminizing10.1016/j.intermet.2020.106838 ↗
33. The influence of Al addition and aluminizing process on oxidation performance of arc melted CoCrFeNi alloy10.1016/j.vacuum.2021.110749 ↗
34. A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature10.1016/j.jallcom.2020.153981 ↗
35. Mechanism and kinetics of vacuum chromizing of iron10.1016/0042-207X(87)90088-1 ↗
36. Experimental investigation of borided kinetics on martensitic stainless steel10.1016/j.matpr.2022.07.140 ↗
37. Chromium carbide coatings produced on ductile cast iron QT600-3 by thermal reactive diffusion in fluoride salt bath: growth behavior10.1016/j.ceramint.2018.09.304 ↗
38. Evaluation of vanadium carbide coatings on AISI H13 obtained by thermo-reactive deposition/diffusion technique10.1016/j.surfcoat.2010.07.065 ↗
39. Boriding kinetics of H13 steel10.1016/j.vacuum.2005.07.013 ↗
40. Salt‐Bath Chromizing10.1149/1.2776789 ↗
41. Corrosion resistance and microstructural evaluation of the chromized coating process in a dual phase Fe-Mn-Al-Cr alloy10.1016/S0257-8972(01)01546-8 ↗
42. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.actamat.2017.12.052 ↗
43. Demystifying the sluggish diffusion effect in high entropy alloys10.1016/j.jallcom.2018.12.300 ↗
44. A study on kinetics of CrxC-coated high-chromium steel by thermo-reactive diffusion technique10.1016/j.vacuum.2005.01.009 ↗
45. Tribological properties evaluation of AISI 1095 steel chromized at different temperatures10.1016/j.surfcoat.2004.07.011 ↗
46. Chromium carbonitride coating produced on DIN 1.2210 steel by thermo-reactive deposition technique: thermodynamics, kinetics and modeling10.1016/j.surfcoat.2013.02.030 ↗
47. Principles of abrasive wear10.1016/0043-1648(74)90102-1 ↗
48. Comparative study on fretting wear behaviors of Alloy 600MA in dry air and deionized water conditions10.1016/j.wear.2018.11.029 ↗
49. Investigation of the synergism of wear and corrosion using an electrochemical scratch technique10.1023/A:1016771419918 ↗
50. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content10.1016/j.wear.2005.12.008 ↗
51. Mechanisms for transitional friction and wear behavior of sliding metals10.1016/0043-1648(81)90283-0 ↗
52. Plastic deformation and sliding friction of metals10.1016/0043-1648(79)90087-5 ↗
53. A model for run-in and other transitions in sliding friction10.1115/1.3261499 ↗
54. Coefficient of external friction in the pressing of metal powders10.1007/BF00797440 ↗
55. The applicability of the binomial law to the process of friction in the cutting of metals10.1016/0043-1648(67)90092-0 ↗
56. CVI. A molecular theory of friction10.1080/14786440608564819 ↗
57. An adhesive wear model of fractal surfaces in normal contact10.1016/j.ijsolstr.2009.12.003 ↗
58. Sliding friction and wear mechanisms of Cu36Zr48Ag8Al8 bulk metallic glass under different sliding conditions: dry sliding, deionized water, and NaOH corrosive solutions10.1016/j.triboint.2020.106211 ↗
59. Tribo-metallographic behavior of high carbon steels in dry sliding: I. Wear mechanisms and their transitio10.1016/S0043-1648(99)00115-5 ↗
60. Oxidative wear behaviour of laser clad High Speed Steel thick deposits: influence of sliding speed, carbide type and morphology10.1016/j.surfcoat.2017.02.071 ↗
61. Corrosion of AlxCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior10.1016/j.corsci.2017.02.019 ↗
62. Temperature dependence of pitting potentials for austenitic stainless steels above their critical pitting temperature10.1016/S0010-938X(98)00020-1 ↗
63. The metastable pitting potential and its relation to the pitting potential for four materials in chloride solutions10.1016/j.corsci.2013.11.015 ↗
64. Corrosion resistance of 316 stainless steel in a simulated pressurized water reactor improved by laser cladding with chromium10.1016/j.surfcoat.2022.128534 ↗