Optimization of Pd–Co–Cu and Pd–Co–Au catalysts for the oxidation of formic acid using scanning electrochemical microscopy
Source abstract
Abstract
This study uses scanning electrochemical microscopy (SECM) to screen ternary metal catalyst arrays for the oxidation of formic acid. Pd–Co–Au and Pd–Co–Cu ternary metal catalyst arrays are prepared using a piezoelectric dispensing system and then reduced on a glassy carbon substrate by hydrogen reduction. For the catalyst arrays, the optimal ratio of ternary alloy catalysts for the oxidation of formic acid is Pd 2Co 6Au 2 and Pd 2Co 6Cu 2 catalysts in Pd–Co–Au and Pd–Co–Cu ternary metal catalyst arrays, respectively. The surface morphology of Pd 2Co 6Au 2 and Pd 2Co 6Cu 2 catalysts is more complex and diverse than that of a pure Pd catalyst. A Pd 2Co 6Au 2 catalyst is mainly composed of heterostructures of Au and PdCoO 2, and a Pd 2Co 6Cu 2 catalyst is mainly composed of heterostructures of CuPdO 2, CuCoO 2 and Co. The XPS results roughly matches with the XRD results. Cyclic voltammograms show that these two catalysts have a higher oxidation current in formic acid than that for a pure Pd catalyst. The onset potential for the oxidation of formic acid by a Pd 2Co 6Cu 2 catalyst is lower than that for a Pd 2Co 6Au 2 catalyst. Electrochemical impedance spectroscopy analysis shows that these catalysts exhibit pseudo inductive behavior. For an equivalent circuit, a Pd 2Co 6Cu 2 catalyst has the smallest charge transfer resistance and removes the intermediate adsorbate at the lowest overpotential.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Electrochemical Analysis and Applications · CO2 Reduction Techniques and Catalysts
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Controllable synthesis of Pd nanocatalysts for direct formic acid fuel cell (DFAFC) application: from Pd hollow nanospheres to Pd nanoparticles10.1021/jp073666p ↗
2. Small addition of boron in palladium catalyst, big improvement in fuel cell’s performance: what may interfacial spectroelectrochemistry tell?10.1021/acsami.6b00416 ↗
3. Influence of solution pH on Pt anode catalyst in direct formic acid fuel cells10.1021/acscatal.5b01981 ↗
4. Effects of the addition of antimony, tin, and lead to palladium catalyst formulations for the direct formic acid fuel cell10.1021/jp102990t ↗
5. From CO2 to formic acid fuel cells10.1021/acs.iecr.0c04711 ↗
6. Three-dimensional CFD modeling of a direct formic acid fuel cell10.1016/j.ijhydene.2019.01.062 ↗
7. Theoretical investigations on decomposition of HCOOH catalyzed by Pd7 cluster10.1021/jp308819j ↗
8. Mechanistic implication of the pH effect and H/D kinetic isotope effect on HCOOH/HCOO– oxidation at Pt electrodes: a study by computer simulation10.1021/acscatal.1c01035 ↗
9. A new pathway for formic acid electro-oxidation: the electro-chemically decomposed hydrogen as a reaction intermediate10.1016/j.jechem.2022.03.036 ↗
10. Electrocatalysis of formic acid on palladium and platinum surfaces: from fundamental mechanisms to fuel cell applications10.1039/C4CP03151B ↗
11. Direct formic acid fuel cells with 600 mA cm-2 at 0.4 V and 22 °C10.1002/fuce.200400052 ↗
12. Recent advances in direct formic acid fuel cells (DFAFC)10.1016/j.jpowsour.2008.03.075 ↗
13. Formic acid as a hydrogen source - recent developments and future trends10.1039/c2ee21928j ↗
14. Verónica Celorrio, Paola Quaino, Elizabeth Santos, Jonathan Flórez-Montaño, Jo.J.L. Humphrey, O. Guillén-Villafuerte, Daniela Plana, María Jesús L.ázaro Elorri, Elena Pastor Tejera, David J. Fermin, Strain Effects on the Oxidation of CO and HCOOH on Au-Pd Core-shell Nanoparticles, 2017. 〈https://doi.org/10.1021/acscatal.6b03237〉.10.1021/acscatal.6b03237 ↗
15. Early stages during the oxidation of HCOOH on single-crystal Pt electrodes as characterized by infrared spectroscopy10.1021/la960264s ↗
16. Bridge-bonded formate: active intermediate or spectator species in formic acid oxidation on a Pt film electrode?10.1021/la060928q ↗
17. Insights into the preference of CO2 formation from HCOOH decomposition on Pd surface: a theoretical study10.1021/jp211900z ↗
18. A molecular orbital study of CO chemisorption on the Pd/W(110) system10.1021/la9406968 ↗
19. Understanding the effect of the adatoms in the formic acid oxidation mechanism on Pt(111) electrodes10.1021/cs501729j ↗
20. Performance characterization of Pd/C nanocatalyst for direct formic acid fuel cells10.1016/j.jpowsour.2004.12.031 ↗
21. A highly active carbon-supported PdSn catalyst for formic acid electrooxidation10.1016/j.apcatb.2011.01.023 ↗
22. Carbon-supported Pd100-XAuX alloy nanoparticles for the electrocatalytic oxidation of formic acid: influence of metal particles composition on activity enhancement10.1016/j.apcatb.2017.09.039 ↗
23. Bi-modified Pt supported on carbon black as electro-oxidation catalyst for 300 W formic acid fuel cell stack10.1016/j.apcatb.2019.04.059 ↗
24. Flower-like carbon supported Pd–Ni bimetal nanoparticles catalyst for formic acid electrooxidation10.1016/j.electacta.2019.134816 ↗
25. Surface electronic structure and reactivity of transition and noble metals10.1016/S1381-1169(96)00348-2 ↗
26. Carbon supported Pd-based bimetallic and trimetallic catalyst for formic acid electrochemical oxidation10.1016/j.apcatb.2015.07.023 ↗
27. Porous AgPt@Pt nanooctahedra as an efficient catalyst toward formic acid oxidation with predominant dehydrogenation pathway10.1021/acsami.6b11895 ↗
28. Hydrogen energy future with formic acid: a renewable chemical hydrogen storage system10.1039/C5CY01276G ↗
29. Newly-designed complex ternary pt/pdcu nanoboxes anchored on three-dimensional graphene framework for highly efficient ethanol oxidation, Adv. Mater., 24, 2012, p. 5493.10.1002/adma.201200498 ↗
30. One-step synthesis of PtPdAu ternary alloy nanoparticles on graphene with superior methanol electrooxidation activity10.1016/j.electacta.2011.07.094 ↗
31. Facile fabrication of PtCuAu nanoparticles modified reduced graphene oxide with high electrocatalytic activity toward formic acid oxidation10.1016/j.colsurfa.2014.11.059 ↗
32. Scanning electrochemical microscopy: a comprehensive review of experimental parameters from 1989 to 201510.1021/acs.chemrev.6b00067 ↗
33. Yu.V. Pleskov, Scanning electrochemical microscopy, in: A.J. Bard, M.V. Mirkin (Eds.), Russ. J. Electrochem., Marcel Dekker, New York, 38, 2002.
34. Electrocatalytic activity of Pd-Co bimetallic mixtures for formic acid oxidation studied by scanning electrochemical microscopy10.1021/ac901096h ↗
35. Scanning electrochemical microscopy. 48. Hg/Pt hemispherical ultramicroelectrodes: fabrication and characterization10.1021/ac034088l ↗
36. Scanning electrochemical microscopy. 60. Quantitative calibration of the SECM substrate generation/tip collection mode and its use for the study of the oxygen reduction mechanism10.1021/ac702453n ↗
37. XPS and XRD investigation of Co/Pd/TiO2 catalysts by different preparation methods10.1016/j.elspec.2009.05.012 ↗
38. XPS characterization of cobalt impregnated SiO2 and γ-Al2O310.1002/sia.6935 ↗
39. Temperature-dependent exchange bias properties of polycrystalline PtxCo1− x/CoO bilayers10.1016/j.tsf.2013.09.086 ↗
40. XPS study of interactions between linear carbon chains and colloidal Au nanoparticles10.1016/j.mencom.2020.05.007 ↗
41. Electronic and geometric properties of Au nanoparticles on highly ordered pyrolytic graphite (HOPG) studied using X-ray photoelectron spectroscopy (XPS) and scanning tunneling microscopy (STM)10.1021/jp054790g ↗
42. Ultrathin Co3O4 nanomeshes for the oxygen evolution reaction10.1021/acscatal.7b03949 ↗
43. Solar absorptance of copper–cobalt oxide thin film coatings with nano-size, grain-like morphology: optimization and synchrotron radiation XPS studies10.1016/j.apsusc.2013.01.081 ↗
44. Preparation and characterization of copper-doped cobalt oxide electrodes10.1021/jp0642903 ↗
45. Effect of the partial replacement of Ni or Co by Cu on the electrocatalytic activity of the NiCo2O4 spinel oxide10.1016/S0022-0728(99)00018-2 ↗
46. Characterization of thin CuCo2O4 films prepared by chemical spray pyrolysis. Study of their electrochemical stability by ex situ spectroscopic analysis10.1016/S0022-0728(96)05072-3 ↗
47. CuxCo3−xO4 used as bifunctional electrocatalyst physicochemical properties and electrochemical characterization for the oxygen evolution reaction
48. Preparation of mesoporous SiO2–Al2O3 supported Co or Mn catalysts and their catalytic properties in cyclohexane nitrosation to ɛ-caprolactam10.1016/j.molcata.2011.10.010 ↗
49. Systematic XPS studies of metal oxides, hydroxides and peroxides10.1039/a908800h ↗
50. Methane oxidation over nanocrystalline LaCo1-XFeXO3: resistance to SO2 poisoning10.1021/ie030775r ↗
51. PdAg alloy nanowires: facile one-step synthesis and high electrocatalytic activity for the oxidation of formic acid10.1021/cs200538g ↗
52. Composition effects of FePt alloy nanoparticles on the electro-oxidation of formic acid10.1021/la7016648 ↗
53. Langmuir−Blodgett thin films of Fe20Pt80 nanoparticles for the electrocatalytic oxidation of formic acid10.1021/jp072385e ↗
54. Nanoneedle-covered Pd−Ag nanotubes: high electrocatalytic activity for the oxidation of formic acid10.1021/jp107768n ↗