Precipitation of B2 and B19 phases in α2 lamella of Ti-44.5Al-4 Nb-1Mo-0.1B alloy
Source abstract
Abstract
The α 2→B2 and α 2→B19 phase transformations were widely observed inside the same α 2 lamellae of the Ti-44.5Al-4 Nb-1Mo-0.1B alloy during the 1050 ℃ short term heat treatment without external stress. The differences between the B2 and B19 precipitates were characterized by transmission electron microscopy (TEM). In general, the α 2 /γ lamellar interface morphologies of the B2 precipitate region sharply differ from those of the B19 precipitate region. B19 only precipitates at a relatively straight α 2/γ lamellar interface, while B2 only precipitates at a relatively curved α 2/γ lamellar interface. It was found that B2 and B19 precipitations inside the α 2 phase obey the orientation relationship with α 2: (100) B19[010] B19 // (0001) α 2 [11 2 ̅ 0] α 2, (011) B2 [ 1 ̅ 11] B2// (0001) α 2 [11 2 ̅ 0] α 2. The precipitation of B2/B19 after heat treatment at 1050 °C for 6 h is controlled by the element-diffusion mechanism. The difference between the B2 and B19 precipitation region interface distortion width and its α 2 /γ interface morphologies are discussed by calculating lattice disregistry between α 2/B2 and α 2/B19.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Advanced intermetallic TiAl alloys10.4028/www.scientific.net/MSF.879.113 ↗
2. Advances in gammalloy materials–processes–application technology: successes, dilemmas, and future10.1007/s11837-018-2747-x ↗
3. The effect of heat treatment variables on the phase transformations at 1420°c in ti-48a1 and Ti-48al-2Mn-2Nb alloys10.1016/0956-7151(95)00119-G ↗
4. Phase transformation and microstructure evolution of differently processed Ti–45Al–9Nb–Y alloy10.1016/j.intermet.2012.07.009 ↗
5. Thermal exposure induced α2+γ→B2(ω) and α2→B2(ω) phase transformations in a high Nb fully lamellar TiAl alloy10.1016/S1359-6462(02)00350-0 ↗
6. Thermal stability of Ti–44Al–8Nb–1B alloy10.1016/j.intermet.2007.09.004 ↗
7. Microstructural instability and embrittlement behaviour of an Al-lean, high-Nb γ-TiAl-based alloy subjected to a long-term thermal exposure in air10.1016/j.intermet.2009.07.007 ↗
8. Microstructural changes and mechanical behaviour of a near lamellar γ-TiAl alloy during long-term exposure at 700 °C10.1016/j.intermet.2017.02.002 ↗
9. 0 precipitation in α2 lamellae of the β-solidifying multiple-phase γ-TiAl alloy10.1016/j.matchar.2020.110474 ↗
10. New ordered structure of TiAl studied by high-resolution electron microscopy10.1016/0966-9795(95)00051-8 ↗
11. Nano-scale design of TiAl alloys based on beta-phase decomposition
12. A novel in situ composite structure in TiAl alloys10.1016/j.msea.2007.08.095 ↗
13. In situ synchrotron study of B19 phase formation in an intermetallic gamma-TiAl alloy10.1002/adem.201200047 ↗
14. Diffractive determination of thermo-elastic single crystal constants using polycrystalline samples. I. Thermal expansion of gamma-TiAl from 300 to 900 K10.1016/S0966-9795(98)00110-1 ↗
15. Structure and chemistry of aluminum predose layers in AlN epitaxy on (111) silicon10.1016/j.actamat.2016.05.036 ↗
16. Phase transformations during creep of a multiphase TiAl-based alloy with a modulated microstructure10.1016/j.msea.2008.08.047 ↗
17. B19 phase in Ti–45Al–8.5Nb–0.2W–0.2B–0.02Y alloy10.1016/j.jallcom.2014.08.137 ↗
18. Microstructural design and mechanical properties of a cast and heat-treated intermetallic multi-phase γ-TiAl based alloy10.1016/j.intermet.2013.09.010 ↗
19. Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing γ-TiAl based alloy10.1016/j.actamat.2016.06.006 ↗