journal article·2023-05

The effects of strain rate and strain on the deformation-induced grain refinement process and hardness evolution of a polycrystalline cobalt

Weijing Liu, Xinglong An, Wenting Jiang, Song Ni, Min Song

Publisher page

Abstract

In this study, the effects of strain rate and strain on the evolution of microstructure and hardness of a polycrystalline cobalt subjected to high-speed impact and quasi-static compression, with the strain rate of ∼ 10 3 s −1 and 3 × 10 −3 s −1 , respectively, were investigated. During high-speed impact, the high strain rate promoted the activation of various types of twinning: 10 1 ̅ 2 , 10 1 ̅ 1 , 11 2 ̅ 1 and 11 2 ̅ 2 twinning, as well as the 10 1 ̅ 1 − 10 1 ̅ 2 double twinning. Meanwhile, the temperature rise during high-speed impact activated the incomplete dynamic recrystallization. Deformation twinning, deformation-induced martensitic phase transformation and dynamic recrystallization contributed to the grain refinement. During quasi-static compression, dislocation slip and twinning dominated the deformation. Only 10 1 ̅ 2 twins with different orientations were triggered. The number of twins increased with the increase of strain, but was less than that in the high speed compressed sample. The high speed compressed samples exhibited higher hardness values compared with the quasi-statically compressed samples. The more pronounced hardening effect mainly accounted for the higher density of twins produced during high-speed compression. Although the recrystallization during high-speed compression may lead to strain softening, such softening effect was overwhelmed by the strengthening effect of grain refinement.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Microstructure and mechanical properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests10.1016/j.actamat.2018.10.035 ↗
2. Effect of accumulative roll-bonding process on phase transformation and magnetic properties of polycrystalline cobalt
3. Nitrogen doped Co-Cr-Mo-W based alloys fabricated by selective laser melting with enhanced strength and good ductility10.1016/j.jallcom.2019.01.178 ↗
4. Microstructure and hardness of solution treated and cold-rolled Co75Cr25 alloy10.1016/j.matchar.2021.111521 ↗
5. Laser ultrasonic measurement of recrystallization and grain growth in an L605 cobalt superalloy10.1016/j.matchar.2020.110465 ↗
6. Recrystallization behavior and phase transformation in a hot-rolled pure cobalt during annealing at the elevated temperature10.1016/j.msea.2022.143178 ↗
7. Grain refinement process in a cold-rolled polycrystalline cobalt10.1016/j.matchar.2020.110360 ↗
8. Basal-plane stacking fault energy of hexagonal close-packed metals based on the Ising model10.1016/j.actamat.2012.10.023 ↗
9. Phase transformation induced plasticity in high-strength hexagonal close packed Co with stacking faults10.1016/j.scriptamat.2019.07.030 ↗
10. Molecular dynamics and first-principles studies on the deformation mechanisms of nanostructured cobalt10.1016/j.jallcom.2010.02.144 ↗
11. Transition of deformation mechanisms from twinning to dislocation slip in nanograined pure cobalt10.1016/j.jmst.2022.02.009 ↗
12. Size effects in cobalt plastically strained in tension: impact on gliding and twinning work hardening mechanisms10.1016/j.jmrt.2021.01.105 ↗
13. Characterization of deformation twinning in polycrystalline cobalt: a quantitative analysis10.1016/j.mtla.2019.100420 ↗
14. The roles of grain boundary dislocations and disclinations in the nucleation of {1 0 [formula omitted] 2} twinning10.1016/j.actamat.2013.09.012 ↗
15. Structural characterization of 101̅1 twin boundaries in deformed cobalt10.1016/j.matchar.2016.04.005 ↗
16. Unravelling the nucleation and growth of {11-2¯2} twins10.1016/j.scriptamat.2022.114730 ↗
17. Strain-induced martensitic transformation near twin boundaries in a biomedical Co–Cr–Mo alloy with negative stacking fault energy10.1016/j.actamat.2012.11.041 ↗
18. Athermal ε-martensite transformation in a Co–20Cr alloy: effect of rapid solidification on plate nucleation10.1016/j.actamat.2016.03.047 ↗
19. Structural characterization of island ε-martensitic plate in cobalt10.1016/j.matchar.2016.07.008 ↗
20. Structural characterization of a special boundary between α plates after martensitic transformation in cobalt10.1016/j.matchar.2015.12.032 ↗
21. Deformation mechanism of pure hafnium under high speed compression10.1016/j.matchar.2020.110639 ↗
22. Individual effect of recrystallisation nucleation sites on texture weakening in a magnesium alloy: part 2- shear bands10.1016/j.actamat.2017.12.019 ↗
23. Initiation of dynamic recrystallization in constant strain rate hot deformation10.2355/isijinternational.43.684 ↗
24. Structural evolutions of metallic materials processed by severe plastic deformation10.1016/j.mser.2018.06.001 ↗
25. TEM analysis of the deformation microstructure of polycrystalline cobalt plastically strained in tension10.1016/j.matchar.2017.09.038 ↗
26. Microstructural and hardness evolutions of a cold-rolled cobalt
27. Strain-induced grain refinement of cobalt during surface mechanical attrition treatment10.1016/j.actamat.2004.10.021 ↗
28. Shear localization in metallic materials at high strain rates
29. The Avrami kinetics of dynamic recrystallization10.1016/j.actamat.2009.02.033 ↗
30. Recrystallization kinetics within adiabatic shear bands10.1016/S1359-6454(96)00193-0 ↗