The microstructure and texture evolution of Mg-5Sn-1Si-0.8Y alloy during the reciprocating extrusion process (REP)
Source abstract
Abstract
In this paper, the microstructure and texture evolution of Mg-5Sn-1Si-0.8Y alloy fabricated by reciprocating extrusion process (REP) at 340 ℃ for 2–8 passes is characterized by optical microscopy (OM), Scanning Electron Microscope (SEM) and Electron Backscatter Diffraction (EBSD). The results show that the microstructure was refined significantly, dynamic recrystallization (DRX), fragmentation of the second Mg 2Si phase and precipitation of the Mg 2Sn phase occurred during REP. With the increase of the REP passes, the fraction of low angle grain boundaries (LAGBs) showed a decreasing trend and the secondary phases distribution became more and more homogeneous and the degree of DRX was increased. At the same time, the initial extruded fiber basal texture was gradually weakened and became random as the REP passes increases. The hardness of the alloy also shown an increasing trend with the increase of REP passes. The grain refinement mechanism, texture evolution and increase of hardness were mainly related to the dynamic recrystallization and the particle stimulation nucleation (PSN) effect of the second phases.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
2. Research advances in magnesium and magnesium alloys worldwide in 202010.1016/j.jma.2021.04.001 ↗
3. Exploring the Hall-Petch relation and strengthening mechanism of bimodal-grained Mg–Al–Zn alloys10.1016/j.jallcom.2020.155004 ↗
4. Microstructure evolution in magnesium alloy AZ31 during cyclic extrusion compression10.1016/j.jallcom.2007.07.116 ↗
5. Effect of large thickness-reduction on microstructure evolution and tensile properties of Mg-9Al-1Zn alloy processed by hard-plate rolling
6. Microstructure evolution of AZ series magnesium alloys during cyclic extrusion compression10.1016/j.msea.2009.11.065 ↗
7. High strength and ductility AZ91 magnesium alloy with multi-heterogenous microstructures prepared by high-temperature ECAP and short-time aging10.1016/j.msea.2018.07.075 ↗
8. Microstructure and tensile behavior of a friction stir processed magnesium alloy10.1016/j.actamat.2012.06.029 ↗
9. Improved strength of Mg alloy extruded at high speed with artificial cooling10.1016/j.jallcom.2015.06.219 ↗
10. Effects of volume fraction of fine grains on the tensile creep properties of a hot-deformed Mg-Gd-Y-Zr alloy10.1016/j.msea.2020.139052 ↗
11. High ductility induced by un-DRXed grains in a Mg–Zn–Mn–La–Ce alloy10.1007/s10853-019-03624-3 ↗
12. Method for unlimited deformation of metals and alloys
13. Network-shaped fine-grained microstructure and high ductility of magnesium alloy fabricated by cyclic extrusion compression10.1016/j.scriptamat.2007.09.058 ↗
14. Microstructural refinement and homogenization of Mg–SiC nanocomposites by cyclic extrusion compression10.1016/j.msea.2012.06.086 ↗
15. Enhanced strength and ductility due to microstructure refinement and texture weakening of the GW102K alloy by cyclic extrusion compression10.1016/j.jmst.2016.01.004 ↗
16. Effect of reciprocating extrusion temperature and passes on the microstructural evolution of Mg-5Sn-1Si-0.8Y alloy10.3139/146.111809 ↗
17. Microstructures and tensile properties of as-cast Mg-5Sn-1Si magnesium alloy modified with trace elements of Y, Bi, Sb and Sr10.1007/s41230-021-0117-8 ↗
18. Effects of cyclic extrusion and compression parameters on microstructure and mechanical properties of Mg–1.50Zn–0.25Gd alloy10.1016/j.matdes.2015.07.155 ↗
19. Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression10.1016/j.msea.2014.02.031 ↗
20. Microstructure evolution in magnesium alloy AZ31 during cyclic extrusion compression10.1016/j.jallcom.2007.07.116 ↗
21. Microstructural evolution over a large strain range in aluminium deformed by cyclic-extrusion–compression10.1016/S0921-5093(98)00988-5 ↗
22. Premium 7075 aluminium alloys produced by reciprocating extrusion10.1002/adem.200400107 ↗
23. Microstructure and high tensile ductility of ZK60 magnesium alloy processed by cyclic extrusion and compression10.1016/j.jallcom.2008.09.031 ↗
24. H. Yu, X. Guo, H. Cui, J. Ma, 2019. Effect of reciprocating extrusion temperature and passes on the microstructural evolution of Mg-5Sn-1Si-0.8Y alloy, 110 (2019) 824–835.10.3139/146.111809 ↗
25. Synergic improvement of plasticity and strength of Al-Zn-Mg-Cu alloy by GRain Refinement and Precipitates Redistribution Using Cyclic Extrusion Compression10.1002/adem.201800140 ↗
26. Microstructure and enhanced mechanical properties of an Mg–10Gd–2Y–0.5Zr alloy processed by cyclic extrusion and compression10.1016/j.msea.2010.09.097 ↗
27. Modeling of texture evolution in the deformation zone of second-phase particles10.1016/j.actamat.2008.10.052 ↗
28. The effect of coarse second-phase particles on the rate of grain refinement during severe deformation processing10.1016/S1359-6454(03)00086-7 ↗
29. Study on the effect of solution treatment on hot deformation behavior and workability of Mg-7Gd-5Y-0.6Zn-0.8Zr magnesium alloy10.1016/j.jallcom.2017.05.277 ↗
30. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
31. Microstructure, texture, mechanical properties and biodegradability of extruded Mg-4Zn-xMn alloys10.1016/j.msea.2020.139828 ↗
32. Effects of repetitive upsetting-extrusion parameters on microstructure and texture evolution of Mg–Gd–Y–Zn–Zr alloy10.1016/j.jallcom.2019.03.207 ↗
33. A novel severe plastic deformation method and its effect on microstructure, texture and mechanical properties of Mg-Gd-Y-Zn-Zr alloy10.1016/j.jallcom.2020.153698 ↗
34. Enhanced Strength and Ductility Due to Microstructure Refinement and Texture Weakening of the GW102K Alloy by Cyclic Extrusion Compression10.1016/j.jmst.2016.01.004 ↗
35. Mechanical anisotropy improvement in ultrafine-grained ZK61 magnesium alloy rods fabricated by cyclic extrusion and compression10.1016/j.msea.2014.02.031 ↗
36. Microstructure evolution and texture tailoring during hot compression at low temperatures of an extruded dilute Mg-0.5Sn-0.5Zn-0.5Al alloy10.1016/j.msea.2020.139606 ↗
37. Microstructures evolution, texture characteristics and mechanical properties of Mg-2.5Nd-0.5Zn-0.5Zr alloy during the high strain rate hot-rolling10.1016/j.msea.2020.140488 ↗
38. Enhanced mechanical properties of Mg-Zn-Y-Zr alloy by low-speed indirect extrusion10.1016/j.jmrt.2020.06.029 ↗
39. Microstructure evolution and mechanical properties of quasicrystal-reinforced Mg–Zn–Gd alloy processed by cyclic extrusion and compression10.1016/j.jallcom.2014.11.167 ↗
40. Tribological behavior of carbon nanotube-reinforced AZ91D composites processed by cyclic extrusion and compression10.1007/s11249-018-1018-x ↗
41. Reaction kinetics in processes of nucleation and growth
42. Particle stimulated nucleation during dynamic recrystallization using a cellular automata model10.1016/j.scriptamat.2005.01.012 ↗
43. Refinement of the icosahedral quasicrystalline phase and the grain size of Mg–9.25Zn–1.66Y alloy by high-ratio differential speed rolling10.1016/j.scriptamat.2015.03.004 ↗
44. Particle effects on recrystallization in magnesium–manganese alloys: particle-stimulated nucleation10.1016/j.actamat.2009.02.032 ↗
45. Effects of cyclic extrusion and compression on the microstructure and mechanical properties of AZ91D magnesium composites reinforced by SiC nanoparticles10.1016/j.matchar.2017.01.008 ↗
46. The microstructure and impression creep behavior of cast Mg–4Sn–4Ca alloy10.1016/j.msea.2015.11.085 ↗
47. Dependence of mechanical and thermoelectric properties of Mg2Si-Sn nanocomposites on interface density10.1016/j.jallcom.2018.07.323 ↗