journal article·2023-04

Effect of Cu-15Sn on the microstructure and mechanical properties of pressureless sintered Fe-Co-Cu alloy

Yuhui Chen, Hongliang Tao, Haojun Zhou, Yimin Li, Yuhang Yin, Fenghua Luo

Publisher page

Abstract

Fe-Co-Cu alloys were prepared by pressureless sintering at 875 °C. The effects of pre-alloyed Cu-15Sn sintering aids on the microstructure and mechanical properties of Fe-Co-Cu alloys were investigated. The results show that the Cu-15Sn aids makes the sintering densification process of Fe-Co-Cu alloy changes from solid phase sintering to instantaneous liquid phase sintering, which improves atomic diffusion rate and relative density of alloys, and also makes the matrix grains grow up. The relative density, hardness and bending strength of Fe-10 wt% Co-15 wt% Cu alloy can be significantly improved by adding 7 wt% Cu-15Sn, which can reach 96.34 %, 85 HRB, and 1857 MPa, respectively. The volume fraction of Cu-rich phase, the relative density of the alloy and the grain size have great influence on the hardness and bending strength of the alloy. When there are too many liquid phases, the relative density of the alloy decreases, making it difficult to continue to improve the strength of the alloy. Intergranular brittle fracture occurs mainly in α-Fe phase grains, but dislocation slip deformation occurs in Cu-rich phase grains. With the increase of volume fraction of Cu-rich phase and relative density, the alloy gradually exhibits macroscopic plasticity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Consolidation of diamond tools using Cu-Co-Fe based alloys as metallic binders10.1179/003258901666211 ↗
2. Structure, microstructure and mechanical properties of PM Fe–Cu–Co alloys10.1016/j.matdes.2009.07.027 ↗
3. Study of the diamond-matrix interface in hot-pressed cobalt-based tools10.1016/0921-5093(90)90066-C ↗
4. Graphitization of diamond at zero pressure and at a high pressure10.1098/rspa.1972.0086 ↗
5. Effects of sintering additives on mechanical properties and microstructure of Si3N4 ceramics by microwave sintering10.1016/j.msea.2016.12.031 ↗
6. Pulse electric current sintering of cubic boron nitride/tungsten carbide–cobalt (cBN/WC–Co) composites: effect of cBN particle size and volume fraction on their microstructure and properties10.1016/j.msea.2014.04.029 ↗
7. Use of PM Fe–Cu–SiC composites as bonding matrix for diamond tools10.1179/174329007X161982 ↗
8. Review: liquid phase sintering10.1007/s10853-008-3008-0 ↗
9. Progress in pressureless sintering of boron carbide ceramics – a review10.1080/17436753.2019.1574285 ↗
10. Wear characteristics of Fe-based diamond composites with cerium oxide (CeO2) reinforcements10.1016/j.ijrmhm.2019.105093 ↗
11. Sintering additives for SiC based on the reactivity: a review10.1016/j.ceramint.2016.09.022 ↗
12. Microwave sintering behavior of FeCuCo based metallic powder for diamond alloy tool bit10.1016/j.jallcom.2017.08.132 ↗
13. New utilization approach of microwave thermal energy: preparation of metallic matrix diamond tool bit by microwave hot-press sintering10.1016/j.jallcom.2018.03.183 ↗
14. Determination of matrix composition for diamond cutting tools according to the hardness and abrasivity properties of rocks to be cut10.1016/j.ijrmhm.2020.105466 ↗
15. Microstructure and performance of glass fiber metal composite-bonded diamond segment with Cu-Sn-Ti alloy10.1016/j.ceramint.2022.07.014 ↗
16. Promoting the bonding strength and abrasion resistance of brazed diamond using Cu-Sn-Ti composite alloys reinforced with tungsten carbide10.1016/j.diamond.2021.108239 ↗
17. Intermetallic compound formation mechanisms for Cu-Sn solid–liquid interdiffusion bonding10.1007/s11664-012-2060-3 ↗
18. Thermodynamic evaluation of Fe-Sn phase diagram10.1016/S0364-5916(96)00021-1 ↗
19. Calorimetric and phase diagram studies of the Co-Sn system10.1016/j.intermet.2007.02.006 ↗
20. Thermodynamic analysis of the stable and metastable Co–Cu and Co–Cu–Fe phase diagrams10.1016/j.calphad.2005.10.007 ↗
21. CVM calculation of the ternary system Co–Cu–Fe10.1016/S0925-8388(00)01198-1 ↗
22. Effects of binders on the microstructures and mechanical properties of ultrafine WC-10 % AlxCoCrCuFeNi composites by spark plasma sintering10.1016/j.jallcom.2019.03.328 ↗
23. Thermodynamic assessment of the Co-Cu-Fe system and diffusion study of its fcc phase10.1016/j.calphad.2022.102430 ↗
24. Thermodynamic description of the Cu-Sn system10.1557/JMR.2007.0396 ↗
25. The Cu-Sn phase diagram part II: new thermodynamic assessment10.1016/j.intermet.2012.10.010 ↗
26. Transmission electron microscope investigations of the structure of copper precipitates inthermally-aged Fe-Cu and Fe-Cu-Ni10.1080/09500839108215121 ↗
27. Microstructural evolution in reactor pressure vessel steels10.1016/0022-3115(93)90079-E ↗
28. The liquid metastable miscibility gap in Cu-based systems10.1016/j.fluid.2006.10.003 ↗
29. Void formation and its impact on Cu-Sn intermetallic compound formation10.1016/j.jallcom.2016.03.193 ↗
30. Prediction of Kirkendall shift and porosity in binary and ternary diffusion couples10.1016/j.actamat.2004.06.039 ↗
31. Forming mechanism and growth of Kirkendall voids of Sn/Cu joints for electronic packaging: a recent review
32. WC coarsening in cemented carbides during sintering. Part I: the influence of WC grain size and grain size distribution10.1016/j.ijrmhm.2021.105714 ↗
33. High pressure X-ray diffraction study of all Fe–Sn intermetallic compounds and one Fe–Sn solid solution10.1016/j.jallcom.2005.11.061 ↗
34. Electrochemical performance of nanostructured amorphous Co3Sn2 intermetallic compound prepared by a solvothermal route10.1016/j.jpowsour.2006.09.094 ↗
35. A theory for grain boundary pinning by particles10.1016/0001-6160(87)90280-X ↗
36. Influence of double press/double sinter processing on sintered alloys made from pre-alloyed steel powder
37. Effect of Co on microstructure and mechanical properties of precipitation hardening stainless steel10.1051/metal/2020006 ↗
38. A comparison of the effects of cobalt, silicon, nickel and aluminum on the tempering response of a medium chromium secondary hardening steel10.2355/isijinternational.46.782 ↗
39. Correlation between mechanical properties and Cu precipitates induced by neutron irradiation of Fe-Cu alloys10.1016/j.jnucmat.2018.10.029 ↗
40. Effect of fly ash cenosphere pore formers on the microstructure and mechanical properties of vitrified diamond grinding wheels10.1016/j.ijrmhm.2017.05.008 ↗
41. Effect of PMMA pore former on microstructure and mechanical properties of vitrified bond CBN grinding wheels
42. Effect of intrinsic lattice resistance in strain gradient plasticity10.1016/S1359-6454(01)00299-3 ↗
43. Effect of nano-vanadium nitride on microstructure and properties of sintered Fe-Cu-based diamond composites10.1016/j.ijrmhm.2020.105256 ↗
44. On the toughening of ceramics by strong reinforcements10.1016/0001-6160(86)90146-X ↗
45. Flow characteristics of highly constrained metal wires10.1016/0001-6160(89)90069-2 ↗
46. High temperature creep and fracture properties of a class I solid solution alloy: Cu-2.7 at% Sn10.1016/0001-6160(86)90090-8 ↗