Ni-Ti-Zr ternary alloy with high transition temperature fabricated by laser powder bed fusion
Source abstract
Abstract
Nitinol alloys have recently drawn significant attention and interest in a broad range of applications, due to their excellent shape memory properties, super elasticity and corrosion resistance. However, the low phase transition temperature of the binary Ni-Ti alloy is difficult to meet the high temperature performance requirements, while adding a third alloying element can dramatically improve the phase transition temperature. Additive manufacturing is an effective means for preparing complex shape memory alloy parts, and laser powder bed fusion (LPBF) technology is the most widely used technology. This paper mainly studies the LPBF process optimization process of Ni-Ti-Zr ternary alloy, and reveals the evolution of microscopic defects, microstructure, phase transformation behavior and mechanical properties in LPBF-formed Ni-Ti-based shape memory alloy through the characterization of microstructure and properties. The optimized process window range is 45–80 J/mm 3 with the highest relative density of 98.89% under laser power of 250 W, scanning speed of 1000 mm/s, and the preheat temperature of 200 ℃. The average compressive fracture strength is measured to be 1955.77 MPa, and the average elastic recovery strains under pre-compression deformation of 3%, 6%, and 9% are 2.41%, 4.06%, and 6.56%, respectively. Furthermore, the average peak temperature of B19`→B2 is 99.19 ℃, and that of B2→B19` is 28.99 ℃. Compared with the LPBF-made binary Ni-Ti alloys, the phase transformation temperature and thermal hysteresis of Ni-Ti-Zr alloy have been significantly increased by the addition of Zr. It is expected to broaden the application of nickel-titanium alloys under high-temperature conditions, and provide a theoretical reference for LPBF forming of high-performance nickel-titanium-based shape memory alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. A review of shape memory alloy research, applications and opportunities10.1016/j.matdes.2013.11.084 ↗
2. Additive manufacturing — A review of 4D printing and future applications
3. Clinical, industrial, and research perspectives on powder bed fusion additively manufactured metal implants
4. A compact NiTi elastocaloric air cooler with low force bending actuation10.1016/j.applthermaleng.2022.118942 ↗
5. Microstructures and mechanical properties of NiTi shape memory alloys fabricated by wire arc additive manufacturing10.1016/j.jallcom.2021.162193 ↗
6. A review on NiTi alloys for biomedical applications and their biocompatibility
7. Effect of laser hatch spacing on the pore defects, phase transformation and properties of selective laser melting fabricated NiTi shape memory alloys10.1016/j.msea.2022.142965 ↗
8. In situ synchrotron radiation X-ray diffraction study on phase and oxide growth during a high temperature cycle of a NiTi-20 at% Zr high temperature shape memory alloy10.1007/s40830-018-0149-0 ↗
9. Effect of Ti/Ni and Hf/Zr ratio on the martensitic transformation behavior and shape memory effect of TiNiHfZr alloys10.1016/j.msea.2021.140850 ↗
10. Precipitation and thermal fatigue in Ni–Ti–Zr shape memory alloy thin films by combinatorial nanocalorimetry10.1016/j.actamat.2011.04.043 ↗
11. Effects of training on the thermomechanical behavior of NiTiHf and NiTiZr high temperature shape memory alloys10.1016/j.msea.2020.139857 ↗
12. Actuation fatigue performance of NiTiZr and comparison to NiTiHf high temperature shape memory alloys10.1016/j.msea.2021.142154 ↗
13. W. Święszkowski, Heat Treatment of NiTi Alloys Fabricated Using Laser Powder Bed Fusion (LPBF) from Elementally Blended Powders10.3390/ma15093304 ↗
14. Y. Oshida, T. Tominaga, Nickel-Titanium Materials, Nickel-Titanium Materials, De Gruyter2020.10.1515/9783110666113 ↗
15. Influence of H-phase precipitation on the microstructure and functional and mechanical properties in a Ni-rich NiTiZr shape memory alloy10.1016/j.msea.2020.140401 ↗
16. High superelasticity NiTi fabricated by cold metal transfer based wire arc additive manufacturing10.1016/j.msea.2022.143001 ↗
17. Effect of WEDM process parameters on surface morphology of nitinol shape memory alloy10.3390/ma13214943 ↗
18. Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting10.1016/j.ijmecsci.2018.08.039 ↗
19. Mechanical responses of sheet-based gyroid-type triply periodic minimal surface lattice structures fabricated using selective laser melting10.1016/j.matdes.2022.110407 ↗
20. Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment10.1038/s41598-018-36641-4 ↗
21. Selective laser melting of NiTi alloy with superior tensile property and shape memory effect10.1016/j.jmst.2019.05.015 ↗
22. On the martensitic transformation temperatures and mechanical properties of NiTi alloy manufactured by selective laser melting: effect of remelting10.1007/s40195-021-01212-6 ↗
23. Engineering the elastic modulus of NiTi cellular structures fabricated by selective laser melting10.1016/j.jmbbm.2020.103891 ↗
24. Properties of a superelastic NiTi shape memory alloy using laser powder bed fusion and adaptive scanning strategies10.1007/s40964-020-00118-6 ↗
25. Microstructural and mechanical response of NiTi lattice 3D structure produced by selective laser melting10.3390/met10060814 ↗
26. Compression and superelasticity behaviors of NiTi porous structures with tiny strut fabricated by selective laser melting
27. Effect of volume fraction and unit cell size on manufacturability and compressive behaviors of Ni-Ti triply periodic minimal surface lattices
28. Compressive mechanics and hyperelasticity of Ni-Ti lattice structures fabricated by selective laser melting10.3390/cryst12030408 ↗
29. Laser power modulated microstructure evolution, phase transformation and mechanical properties in NiTi fabricated by laser powder bed fusion10.1016/j.jallcom.2020.157959 ↗
30. Compression behavior of graded NiTi gyroid-structures fabricated by laser powder bed fusion additive manufacturing under monotonic and cyclic loading10.1007/s11837-021-04938-x ↗
31. Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 71810.1016/j.optlastec.2016.04.009 ↗
32. P. Prevéy, J. Telesman, T. Gabb, P. Kantzos, FOD resistance and fatigue crack arrest in low plasticity burnished IN718, Proceedings of the 5th Nat. Turbine Eng. HCF Conference, Citeseer, 2000.
33. Review on residual stress in selective laser melting additive manufacturing of alloy parts10.1016/j.optlastec.2020.106283 ↗
34. J. Zhang, B. Song, Q. Wei, D. Bourell, Y. Shi, A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends, J. Mater. Sci. Technol. (2018).10.1016/j.jmst.2018.09.004 ↗
35. Novel TiB2-reinforced 316 L stainless steel nanocomposites with excellent room-and high-temperature yield strength developed by additive manufacturing10.1016/j.compositesb.2018.07.050 ↗
36. Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316 L stainless steel nanocomposites10.1016/j.jallcom.2017.08.022 ↗
37. Altered phase transformation behaviors and enhanced bending shape memory property of NiTi shape memory alloy via selective laser melting10.1016/j.jmatprotec.2022.117546 ↗
38. Relationship between crystallographic compatibility and thermal hysteresis in Ni-rich NiTiHf and NiTiZr high temperature shape memory alloys10.1016/j.actamat.2016.08.065 ↗
39. Effect of Ni content on the transformation behavior and mechanical property of NiTi shape memory alloys fabricated by laser powder bed fusion10.1016/j.optlastec.2020.106653 ↗
40. Restoration by rapid overheating of thermally stabilised martensite of NiTi shape memory alloys10.1016/S0925-8388(99)00576-9 ↗
41. Role of nano-precipitation on the microstructure and shape memory characteristics of a new Ni50. 3Ti34. 7Zr15 shape memory alloy10.1016/j.msea.2015.12.076 ↗
42. Microstructural characterization and superelastic response of a Ni50. 3Ti29. 7Zr20 high-temperature shape memory alloy10.1016/j.scriptamat.2014.02.012 ↗
43. A comparative study of a NiTi alloy subjected to uniaxial monotonic and cyclic loading-unloading in tension using digital image correlation: the grain size effect10.1016/j.jallcom.2018.11.050 ↗
44. Compressive properties of 3-D printed Mg–NiTi interpenetrating-phase composite: effects of strain rate and temperature10.1016/j.compositesb.2021.108783 ↗
45. Spatial characterization of the thermal-induced phase transformation throughout as-deposited additive manufactured NiTi bulk builds10.1016/j.scriptamat.2015.01.018 ↗
46. Ti3Ni4 precipitation features in heat-treated grain / subgrain nanostructure in Ni-rich TiNi alloy10.1016/j.intermet.2020.106966 ↗
47. Training and stability of the intrinsic two-way shape memory effect in Ni-Ti alloys10.1016/S1359-6462(98)00155-9 ↗