Influence of hydrostatic pressure on the corrosion and discharging behavior of Al-Zn-In-Mg-Ti alloy
Source abstract
Abstract
The corrosion and discharging behavior of Al-Zn-In-Mg-Ti alloy were studied at a series pressures ranged from 0.1 MPa to 13.0 MPa using weigh loss experiments, electrochemical techniques, and imaging measurements et al. Results reveal that the self-corrosion and self-discharging process of Al-Zn-In-Mg-Ti alloy live through the same three stages, which are all accelerated by hydrostatic pressure. The discharging performance of Al-Zn-In-Mg-Ti drops with increasing pressure, which is caused by the acceleration of cathodic process and severer intergranular corrosion. The corresponding cathodic protection design based on Al-Zn-In-Mg-Ti sacrificial anode with the changing pressure has been set up, which follows exponential function.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Non-Destructive Testing Techniques · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Corrosion behavior of Q235 steel exposed in deepwater of South China Sea10.1007/s11665-018-3553-x ↗
2. W.H. Thomason, K.P. Fischer, Cathodic Protection of Steel Structures in Deep Water: A Review, Offshore Technology Conference, Houston, 1991.10.4043/6588-MS ↗
3. Influence of hydrostatic pressure on pitting of aluminium in sea water10.1179/000705985798272632 ↗
4. A stochastic analysis of the effect of hydrostatic pressure on the pit corrosion of Fe–20Cr alloy10.1016/j.electacta.2009.02.010 ↗
5. Effect of hydrostatic pressure on the corrosion behavior of pure nickel10.1016/S1452-3981(23)13846-6 ↗
6. The role of hydrostatic pressure on the metal corrosion in simulated deep-sea environments — a review10.1016/j.jmst.2021.10.014 ↗
7. Corrosion behaviour of metals and alloys in the waters of the Arabian Sea
8. Corrosion of metals and alloys in the coastal and deep waters of the Arabian Sea and the Bay of Bengal
9. F.K. P, Fied testing of CP current requirements at depth down to 1300 m on the northern Norwegian continental shelf from 63° to 67°N, Paper No. 661 CORROSION/99. San Antonio, Texas, April 25–30, (1999).
10. Cathodic Protection at Simulated Depth of 2500m
11. 2012 Frank Newman Speller Award: Cathodic Protection of Offshore Structures-History and Current Status10.5006/0010-9312-68.12.1063 ↗
12. R · 2000
13. Field testing of deep water cathodic protection on the Norwegian Continental Shelf
14. The performance of Al-Zn-In-Mg-Ti sacrificial anode in simulated deep water environment10.1016/j.corsci.2013.07.029 ↗
15. Fischer · 1991
16. The corrosion behaviour of Al–Zn–In–Mg–Ti alloy in NaCl solution10.1016/j.corsci.2009.10.010 ↗
17. Influence of silicon on the corrosion behaviour of Al–Zn–In–Mg–Ti sacrificial anode10.1016/j.corsci.2011.07.039 ↗
18. Corrosion analysis of Al–Zn–In–Mg–Ti–Mn sacrificial anode alloy10.1016/j.jallcom.2010.02.174 ↗
19. Activation effects of eta precipitates in the Al-Zn-In-Mg-Ti sacrificial anode alloys
20. Effect of hydrostatic pressure on the galvanic corrosion of 90/10 Cu-Ni alloy coupled to Ti6Al4V alloy10.1016/j.corsci.2019.108242 ↗
21. G.T. 17848–1999, Test Methods for Electrochemical Properties of Sacrificial Anodes, Beijing, (1999).
22. Stochastic processes of pit generation on zirconium with an anodic oxide film10.1016/0010-938X(92)90039-6 ↗
23. The effect of film formation temperature on the stochastic processes of pit generation on anodized titanium10.1016/0010-938X(94)90128-7 ↗
24. New understanding of the effect of hydrostatic pressure on the corrosion of Ni-Cr-Mo-V high strength steel10.1016/j.corsci.2013.04.013 ↗
25. Effect of hydrostatic pressure on the galvanic corrosion of 90/10 Cu-Ni alloy coupled to Ti6Al4V alloy10.1016/j.corsci.2019.108242 ↗
26. Numerical investigation on stress concentration of corrosion pit10.1016/j.engfailanal.2009.04.004 ↗
27. The Relationship Between Pit Chemistry and Pit Geometry Near the Critical Pitting Temperature10.1149/1.2210670 ↗
28. Numerical investigation on torsional stress concentration factor at the semi elliptical corrosion pit10.1016/j.corsci.2012.10.028 ↗
29. Models for the impedance behavior of protective coatings and cases of localized corrosion10.1016/0013-4686(93)80311-M ↗
30. Corrosion of X65 steel in CO2-saturated oilfield formation water in the absence and presence omf acetic acid10.1016/j.corsci.2009.04.004 ↗
31. Potentiodynamic tests and electrochemical impedance spectroscopy of injection molded 316L steel in NaCl solution10.1016/S0010-938X(00)00140-2 ↗
32. Study on corrosion inhibitor in large pipelines under multiphase flow using EIS10.1016/S0010-938X(01)00052-X ↗
33. Influence of hydrostatic pressure on the corrosion behavior of 90/10 copper-nickel alloy tube under alternating dry and wet condition10.1016/j.corsci.2018.10.036 ↗
34. Influence of temperature and hydrostatic pressure on the galvanic corrosion between 90/10 Cu–Ni and AISI 316L stainless steel10.1016/j.jmrt.2021.05.067 ↗
35. The effects of lanthanum on microstructure and electrochemical properties of Al-Zn-In based sacrificial anode alloys10.1016/j.corsci.2009.05.039 ↗
36. Effect of hydrostatic pressure on the corrosion behavior of a low alloy steel10.1149/2.040303jes ↗
37. Corrosion mechanism of Al, Al–Zn and Al–Zn–Sn alloys in 3wt% NaCl solution10.1016/j.corsci.2014.07.018 ↗
38. Effect of In Content On Microstructure and Electrochemical Performance of Al-Zn-In-Mg-Ti Alloy, Corrosion Science and Protection
39. An investigation on the use of indium to increase dissolution of AlZn anodes in sea water10.1016/j.matdes.2007.01.010 ↗
40. Hydrostatic pressure effects on stress corrosion cracking of X70 pipeline steel in a simulated deep-sea environment10.1016/j.ijhydene.2017.09.061 ↗
41. Improved stress corrosion cracking resistance of high-strength low-alloy steel in a simulated deep-sea environment via Nb microalloying10.1002/srin.202000596 ↗
42. DNV-RP-B401 · 2005
43. I.N. NACE Standard RP0176-2003 · 2003
44. Hu · 2012
45. Evolution of the corrosion product film and its effect on the erosion-corrosion behavior of two commercial 90Cu-10Ni tubes in seawater10.1007/s40195-018-0745-1 ↗
46. The effect of temperature on the galvanic corrosion of the copper/AISI 304 pair in LiBr solutions under hydrodynamic conditions10.1016/j.corsci.2009.10.032 ↗
47. Influence of hydrostatic pressure on the thermodynamics and kinetics of metal corrosion
48. Study on the mechanism of hydrostatic pressure promoting electrochemical corrosion of pure iron in 3.5% NaCl solution10.1016/j.actamat.2020.11.009 ↗
49. Synergistic effects of fluid flow and hydrostatic pressure on the degradation of epoxy coating in the simulated deep-sea environment