Anisotropy of mechanical properties in directionally solidified Nb-Si alloys at room temperature compression
Source abstract
Abstract
The room-temperature compressive strength and deformation mechanisms in directional solidified Nb-Si alloy with different orientations were studied. The Electron Backscattered Diffraction (EBSD) experiment further explained that the orientation relationship between the Nb ss phase and the α-Nb 5Si 3 phase is [001] Nbss // [001] α-Nb5Si3, (110) Nbss // (110) α-Nb5Si3 , and the corresponding relationship between the material crystal structure and macroscopic spatial coordinates was established. The anisotropy of mechanical properties and failure mode in the alloys are attributed to the phase structures which are the long rod-like morphology of the α-Nb 5Si 3 phase growing along [001] and the spatial asymmetry of a single (110) Nbss // (110) α-Nb5Si3 phase interface. The Tsai-Hill criterion was applied to explain the anisotropy of the compressive strength of alloy at an angle to the direction of the heat flow. In addition, phase boundary separation was considered to be an important reason for the higher plasticity exhibited by the [100] compression orientation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. The development of columnar grain and single crystal high temperature materials through directional solidification10.1016/0025-5416(70)90050-9 ↗
2. High rate directional solidification and its application in single crystal superalloys10.1016/S1468-6996(01)00049-3 ↗
3. Comparison of microstructures and mechanical properties of as-cast and directionally solidified Ti-47Al-1W-0.5 Si alloy10.1016/j.jallcom.2016.05.039 ↗
4. Schenk, Tet al, et al., Application of synchrotron X-ray imaging to the study of directional solidification of aluminium-based alloys, J. Cryst. Growth 275(1–2) (2005), 201–208.10.1016/j.jcrysgro.2004.10.081 ↗
5. Directional solidification of TiAl-base alloys10.1016/S0966-9795(99)00157-0 ↗
6. Anisotropy of stress rupture properties of a Ni base single crystal superalloy at two temperatures10.1016/j.msea.2007.07.050 ↗
7. Investigating active slip planes in tantalum under compressive load: crystal plasticity and slip trace analyses of single crystals10.1016/j.actamat.2019.11.030 ↗
8. Directional solidification and microstructural control of the TiAlTi3Al lamellar microstructure in TiAl⸋ Si alloys10.1016/1359-6454(95)00338-X ↗
9. Dislocation interactions with grain boundaries10.1016/j.cossms.2014.05.004 ↗
10. Atom probe informed simulations of dislocation–precipitate interactions reveal the importance of local interface curvature10.1016/j.actamat.2015.03.050 ↗
11. Effect of Sc on the microstructure and room-temperature mechanical properties of Nb-Si based alloys10.1016/j.matdes.2018.10.001 ↗
12. Microstructure and room temperature mechanical properties of hypereutectic Nb–Si based alloy processed by directional solidification10.1179/1743284713Y.0000000303 ↗
13. Microstructure evolution and room temperature fracture toughness of an integrally directionally solidified Nb–Ti–Si based ultrahigh temperature alloy10.1016/j.scriptamat.2010.12.008 ↗
14. Balancing the fracture toughness and tensile strength by multiple additions of Zr and Y in Nb–Si based alloys10.1016/j.intermet.2021.107172 ↗
15. The influence of orientation on the stress rupture properties of nickel-base superalloy single crystals10.1007/BF02647830 ↗
16. The microstructure evolution of directionally solidified Nb-22Ti-14Si-4Cr-2Al-2Hf alloy during heat treatment10.1016/j.intermet.2013.02.022 ↗
17. Anisotropic strength of composites10.1007/BF02326292 ↗
18. Damage evolution and domain-level anisotropy in metal/ceramic composites exhibiting lamellar microstructures10.1016/j.actamat.2009.12.015 ↗
19. A theory of the yielding and plastic flow of anisotropic metals
20. Berthelot · 1999 · 435
21. Comprehensive composite materials10.1016/S1369-7021(99)80033-9 ↗
22. Size effects in the testing of fibre-composite materials10.1016/S0266-3538(99)00053-6 ↗
23. Microstructure and mechanical properties of directionally solidified Nb‐22Ti‐16Si‐7Cr‐3Al‐3Ta‐2Hf‐0.1 Ho alloy10.1002/adem.200700141 ↗
24. Study of the fracture mechanism of NbSS/Nb5Si3 in situ composite: based on a mechanical characterization of interfacial strength10.1016/j.msea.2016.03.110 ↗
25. Microstructural and mechanical characterization of Nb-based in situ composites from Nb–Si–Ti ternary system10.1016/j.actamat.2007.08.012 ↗
26. Effect of martensite distribution on damage behaviour in DP600 dual phase steels10.1016/j.msea.2009.03.055 ↗
27. Energy landscape of deformation twinning in bcc and fcc metals10.1103/PhysRevB.71.224102 ↗
28. Calculation of Schmid factors in magnesium: analysis of deformation behaviors10.1016/j.scriptamat.2012.05.042 ↗
29. Effect of strain rate on tensile mechanical properties of high-purity niobium single crystals for SRF applications10.1016/j.msea.2020.140258 ↗
30. A detailed study of the deformation of high purity niobium single crystals10.1080/14786436908228040 ↗
31. Indentation Schmid factor and orientation dependence of nanoindentation pop-in behavior of NiAl single crystals10.1016/j.jmps.2011.04.003 ↗
32. Deformation mechanism of ω-enriched Ti–Nb-based gum metal: Dislocation channeling and deformation induced ω–β transformation10.1016/j.actamat.2015.08.047 ↗
33. Microstructural characterization of multicomponent Nb-Ti-Si-Cr-Al-X alloys10.1007/BF02586101 ↗
34. In situ formed Ti–Cu–Ni–Sn–Ta nanostructure-dendrite composite with large plasticity10.1016/S1359-6454(03)00386-0 ↗
35. Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio10.1016/j.ijmecsci.2018.03.025 ↗
36. Effect of Ti addition and microstructural evolution on toughening and strengthening behavior of as cast or annealed Nb–Si–Mo based hypoeutectic and hypereutectic alloys10.1007/s11661-021-06316-3 ↗