Microstructure, dislocation density and microhardness of 1 %C-doped CoCrFeNi complex concentrated alloys during isochronal annealing
Source abstract
Abstract
In this study, a microstructure of moderately deformed 1 %C-doped CoCrFeNi complex concentrated alloys (CCA) was investigated in a correlation with microstructure evolution at different annealing temperature for 1 h. After 60 % thickness reduction of cold rolling, the dislocation density accumulated as large as 19 × 10 15 m −2 . The interstitial carbon atom was a key factor inducing large dislocation storage and caused large stored strain energy of 368 J/mol. The recrystallization was completed at 1173 K for 1 h and the average recrystallized grain size was as fine as 3.7 µm. During the annealing between 973 and 1173 K, the carbides were increasingly precipitated with an increase in annealing temperature. The carbon addition delayed the recrystallization process due to solute drag effect and carbide precipitations. The conventional fabrication method produced the fine recrystallized microstructure attributed to the large dislocation density of the deformed microstructure and carbide precipitation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Complex concentrated alloys for substitution of critical raw materials in applications for extreme conditions10.3390/ma14051197 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
4. Critical Assessment 14: High entropy alloys and their development as structural materials10.1179/1743284714Y.0000000749 ↗
5. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
6. Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys10.1016/j.intermet.2016.09.005 ↗
7. Tensile properties of high- and medium-entropy alloys10.1016/j.intermet.2013.03.018 ↗
8. Shang · Mechanical behavior of high-entropy alloys: A review, arXiv preprint arXiv:2102.09055 · 2021
9. Interstitials in f.c.c. High entropy alloys10.3390/met10050695 ↗
10. Microstructural evolution and mechanical performance of carbon-containing CoCrFeMnNi-C high entropy alloys10.1016/j.jallcom.2018.01.348 ↗
11. Effects of carbon on the microstructures and mechanical properties of FeCoCrNiMn high entropy alloys10.1016/j.msea.2019.01.050 ↗
12. Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2016.09.208 ↗
13. Overview of dislocation plasticity
14. Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra10.1063/1.364220 ↗
15. Modeling of diffraction patterns based on microstructural properties
16. Correlation between strength and microstructure of ball-milled Al–Mg alloys determined by X-ray diffraction10.1016/j.msea.2004.01.089 ↗
17. MWP-fit: a program for multiple whole-profile fitting of diffraction peak profiles by ab initio theoretical functions10.1107/S0021889801011451 ↗
18. Stacking faults and twin boundaries in fcc crystals determined by x-ray diffraction profile analysis10.1063/1.2216195 ↗
19. The crystal structure of Cr23C610.1107/S0567740872007526 ↗
20. Formation of M23C6-type precipitates and chromium-depleted zones in austenite stainless steel10.1016/j.scriptamat.2011.06.010 ↗
21. Nanosized precipitates and dislocation networks reinforced C-containing CoCrFeNi high-entropy alloy fabricated by selective laser melting10.1016/j.matchar.2018.08.019 ↗
22. Heterogeneous structure design to strengthen carbon-containing CoCrFeNi high entropy alloy10.1007/s40195-021-01268-4 ↗
23. Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn high entropy alloy10.1016/j.jallcom.2019.06.204 ↗
24. Superior tensile properties of 1%C-CoCrFeMnNi high-entropy alloy additively manufactured by selective laser melting10.1080/21663831.2019.1638844 ↗
25. Some aspects of the heterogeneous precipitation of the metastable γ" phase in alloy 62510.7449/1994/Superalloys_1994_405_418 ↗
26. Precipitation of M23C6 and its effect on tensile properties of 0.3C–20Cr–11Mn–1Mo–0.35N steel10.1016/j.matdes.2015.04.016 ↗
27. Rietveld refinement guidelines10.1107/S0021889898009856 ↗
28. Stored energy in ultrafine-grained 316L stainless steel processed by high-pressure torsion10.1016/j.jmrt.2017.05.001 ↗
29. The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al7.5Cr6 high entropy alloys10.1016/j.actamat.2016.12.074 ↗
30. Evaluation of dislocation activities and accumulation in cold swaged CoCrFeMnNi
31. High-entropy alloys: fundamentals and applications
32. Compositional complexity dependence of lattice distortion in FeNiCoCrMn high entropy alloy system10.1016/j.msea.2021.141775 ↗
33. Compositional complexity dependence of dislocation density and mechanical properties in high entropy alloy systems10.1016/j.pnsc.2020.07.002 ↗
34. Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys10.1016/j.jallcom.2015.12.172 ↗
35. Impact of interstitial C on phase stability and stacking-fault energy of the CrMnFeCoNi high-entropy alloy
36. High-temperature deformation behaviors of the C-doped and N-doped high entropy alloys10.3390/met11101517 ↗
37. Effect of thermomechanical processing on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy10.1016/S1003-6326(18)64727-2 ↗
38. Role of Mg in simultaneously improving the strength and ductility of Al–Mg alloys10.1016/j.msea.2016.01.089 ↗
39. Characterization of dislocation rearrangement in FCC metals during work hardening using X-ray diffraction line-profile analysis, quantum beam
40. On the stored energy evolution after accumulative roll-bonding of invar alloy10.1016/j.matchemphys.2017.08.063 ↗
41. Assessment of strain energy by measuring dislocation density in copper and aluminium prepared by ECAP and ARB10.2320/matertrans.ME200707 ↗
42. Lattice defect investigation of ECAP-Cu by means of X-ray line profile analysis, calorimetry and electrical resistometry10.1016/j.msea.2005.08.070 ↗
43. Elastic moduli and thermal expansion coefficients of medium-entropy subsystems of the CrMnFeCoNi high-entropy alloy10.1016/j.jallcom.2018.02.251 ↗
44. Non-local crystal plasticity model with intrinsic SSD and GND10.1016/j.jmps.2004.03.007 ↗
45. A comparison study of dislocation density, recrystallization and grain growth among nickel, FeNiCo ternary alloy and FeNiCoCrMn high entropy alloy10.1016/j.jallcom.2019.03.052 ↗
46. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
47. Influence of carbon additions on the dynamic recrystallization of high purity α-iron10.2320/matertrans.43.135 ↗
48. Effect of carbon on the cold-worked state and annealing behavior of Two 18wt%Cr-8wt%Ni austenitic stainless steels10.2355/isijinternational.38.572 ↗
49. A model for static recrystallization with simultaneous precipitation and solute drag10.1007/s11661-016-3524-5 ↗
50. Recrystallized microstructures and mechanical properties of a C-containing CoCrFeNiMn-type high-entropy alloy10.1016/j.msea.2018.09.113 ↗
51. Microstructural evolution of a CoCrFeMnNi high-entropy alloy after swaging and annealing10.1016/j.jallcom.2015.05.129 ↗
52. Microstructural evolution after thermomechanical processing in an equiatomic, single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries10.1016/j.intermet.2014.05.014 ↗