journal article·2022-12Open access

Ultra-high mechanical damping during superelastic bending of micro pillars and micro beams in Cu-Al-Ni shape memory alloys

Jose M. San Juan, Jose F. Gómez-Cortés, María L. Nó

Abstract

Mechanical spectroscopy techniques and internal friction measurements have historically offered a key contribution to the understanding of fundamental mechanisms of defects mobility and phase transformations in many kinds of materials. Nowadays, at the beginning of the millennium, the apparition of the new paradigm of nanotechnology reveals new unforeseen properties of the materials at the nano-scale. Nevertheless, instrumented nanoindentation appears as a new mechanical spectroscopy technique to approach the measure of internal friction at the nano-scale through the direct evaluation of the loss factor η. Indeed, nano compression tests on micro and nano pillars recently measured ultra-high mechanical damping in several Cu-based shape memory alloys (SMA). A step forward is given in the present work, approaching the design of potential micro dampers of SMA working in bending and torsion modes. Several micro devices were milled by focused ion beam (FIB) technique, on [001] oriented single crystals of a Cu-Al-Ni SMA. Ultra-high mechanical damping is demonstrated during superelastic bending of square section micro pillars by in-situ testing inside the scanning electron microscope, using a flat apex 60º-conical indenter in off-axis mode. Then, a series of micro beams and micro cantilevers were designed and milled by FIB, and tested using instrumented nanoindentation equipment by applying the load in bending mode as well as in a mixed bending-torsion mode during off-axis tests. In all cases, the internal friction, or mechanical damping per cycle and per unit of volume, was calculated from the measured load-displacement curve. Superelastic cycling during bending of micro pillars, micro beams and micro cantilevers, exhibits stable and reproducible ultra-high mechanical damping with a loss factor η > 0.1. These results paved the road for designing micro-dampers of Cu-based SMA, able to work in different mechanical modes of compression, bending and torsion, opening the way for many applications of mechanical damping at the nano-scale.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Metal and Thin Film Mechanics · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Zener · 1948
2. Nowick · 1972
3. De Batist · 1972
4. Lakes · 1998
5. Schaller · 2001
6. Blanter · 2007
7. Phenomenology and definitions10.4028/www.scientific.net/MSF.366-368.3 ↗
9. Migliori · 1997
10. Leisure · 2017
11. Apparatus for the measurement of internal friction as a function of frequency between 10−5 and 10 Hz10.1063/1.1134874 ↗
12. Apparatus for high-temperature internal friction differential measurements10.1063/1.1141858 ↗
13. Juan, High performance very low frequency forced pendulum10.1016/j.msea.2003.07.023 ↗
14. High-temperature mechanical spectrometer for internal friction measurements10.4028/www.scientific.net/KEM.423.89 ↗
15. Sample dimensions influence strength and crystal plasticity10.1126/science.1098993 ↗
16. The strength of gold nanowires10.1021/nl048456s ↗
17. Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients10.1016/j.actamat.2004.12.031 ↗
18. Fischer-Cripps · 2004
19. Nanoindentation studies of materials10.1016/S1369-7021(06)71495-X ↗
20. Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect10.1016/j.pmatsci.2011.01.005 ↗
21. Stress-induced martensitic transformations and shape memory at nanometer scales10.1016/j.actamat.2006.01.030 ↗
22. Loss of pseudoelasticity in nickel-titanium sub-micron compression pillars10.1016/j.actamat.2007.02.034 ↗
23. Superelasticity and shape memory in micro- and nanometer-scale pillars10.1002/adma.200701527 ↗
24. Nanoscale shape-memory alloys for ultrahigh mechanical damping10.1038/nnano.2009.142 ↗
26. Panel discussion on the application of high damping materials10.1016/S0925-8388(03)00235-4 ↗
27. Thermomechanical behavior at the nanoscale and size effects in shape memory alloys10.1557/jmr.2011.291 ↗
28. Superelastic cycling of Cu-Al-Ni shape memory alloy micropillars10.1016/j.actamat.2012.04.021 ↗
29. Long-term superelastic cycling at nano-scale in Cu-Al-Ni shape memory alloy micropillars10.1063/1.4860951 ↗
30. Ultrahigh superelastic damping at the nano-scale: a robust phenomenon to improve smart MEMS devices10.1016/j.actamat.2018.12.043 ↗
31. Superelastic damping at nanoscale in ternary and quaternary Cu-based shape memory alloys10.1016/j.jallcom.2021.160865 ↗
32. Kaajaraki · 2009
33. Liu · 2006
34. Miniaturization of tuning forks10.1126/science.161.3848.1320 ↗
35. Materials issues in microelectromechanical devices: science, engineering, manufacturing and reliability10.1016/S1359-6454(03)00440-3 ↗
36. Breakdown of shape memory effect in bent Cu-Al-Ni nanopillars: when twin boundaries become stacking faults10.1021/acs.nanolett.5b03483 ↗
37. Superelasticity and shape memory at nano-scale: Size effects on the martensitic transformations10.1016/j.jallcom.2011.10.110 ↗
38. Direct observation of hierarchical nucleation of martensite and size-dependent superelasticity in shape memory alloys10.1039/c3nr05258c ↗
39. Size effect and scaling power-law for superelasticity in shape memory alloys at the nanoscale10.1038/nnano.2017.91 ↗
40. A universal scaling law for the strength of metal micropillars and nanowires10.1016/j.scriptamat.2009.05.012 ↗
41. Universal scaling law for the size effect on superelasticity at the nanoscale promotes the use of shape-memory alloys in stretchable devices10.1002/aelm.201900741 ↗
42. Nanoscale gold pillars strengthened through dislocation starvation10.1103/PhysRevB.73.245410 ↗
43. Modeling dislocation nucleation strengths in pristine metallic nanowire under experimental conditions10.1016/j.actamat.2012.12.044 ↗
44. Measuring surface dislocation nucleation in defect-scarce nanostrutures10.1038/nmat4288 ↗
45. Martensite nucleation on dislocations in Cu-Al-Ni shape memory alloys10.1063/1.2710076 ↗
46. Otsuka · 1998
47. Orientation dependence of β1-β'1 stress-induced martensitic transformation in Cu-Al-Ni shape memory alloy10.1007/BF02628376 ↗
48. Bhattacharya · 2003
49. Quantitative analysis of stress-induced martensites by in-situ transmission electron microscopy superelastic tests in Cu-Al-Ni shape memory alloys10.1016/j.actamat.2010.07.038 ↗
50. Suppression of twinninig mechanism on nanoscale: size effect in Cu-Al-Ni shape memory alloy10.1007/s10853-018-03296-5 ↗
51. Exceptional resilience of small-scale Au30Cu25Zn45 under cyclic stress-induced phase transformation10.1021/acs.nanolett.6b03555 ↗
52. Nanomechanics of shape memory alloys
53. Oligocrystalline shapr memory alloys10.1002/adfm.201103019 ↗
54. Transition from many domain to single domain martensite morphology in small-scale shape memory alloys10.1016/j.actamat.2013.06.003 ↗
55. Juan, A new quantitative approach to the thermoelastic martensitic transformation: the density of elastic states10.1016/j.actamat.2008.08.059 ↗
56. Juan, Temperature memory effect in Cu-Al-Ni shape memory alloys studied by adiabatic calorimetry10.1016/j.actamat.2008.04.010 ↗
57. Strain relaxation in Cu-Al-Ni shape memory alloys studied by in situ neutron diffraction experiments10.1063/1.5049216 ↗
58. Study by resonant ultrasound spectroscopy of the elastic constants of the β phase in Cu-Al-Ni shape memory alloys10.1016/j.msea.2003.06.004 ↗
59. Surface acoustic waves and elastic constants of Cu14%Al4%Ni shape memory alloys studied by Brillouin light scattering10.1088/0022-3727/44/45/455307 ↗
60. Orientation dependence in superelastic Cu-Al-Mn-Ni micropillars10.1016/j.jallcom.2016.10.090 ↗
61. Orientation-dependent superelasticity and fatigue of CuAlMn alloy under in situ micromechanical tensile characterization10.1016/j.jmps.2022.104787 ↗