Precursor chemistry-mediated defect regulation of asphalt-derived carbonaceous materials for slope-dominated sodium storage
Source abstract
Abstract
Intrinsic defects are prevalent in carbonaceous materials and play a key role in electrochemical sodium storage. As a result, the controllable regulation of the defects within carbonaceous materials has been widely concerned. By using the low-cost and widely available petroleum asphalt as the precursor, we discover that the fundamental properties of the precursor are of importance in regulating the defects of petroleum asphalt-derived carbons (PACs), thus their sodium storage performance. The carbonaceous materials derived different petroleum asphalts offer different contents of defects where a clear relationship has been established with the fractions or the H/C ratio of the precursors. The petroleum asphalt with higher light fractions and larger H/C ratio contributes to electrode materials with a higher content of defects. Specifically, the petroleum asphalt with a light fraction as high as 61 wt% affords the highest slope capacity of 220 mAh/g at a low current density and a decent capacity retention. Density functional theory calculation confirms that the defects optimize local electronic configurations, facilitating sodium storage. These results may provide valuable guidance for the rational selection of low-cost precursors to produce anode materials for sodium storage and rationally combine the emerging new energy and the current petroleum industry.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Manganese hexacyanomanganate open framework as a high-capacity positive electrode material for sodium-ion batteries10.1038/ncomms6280 ↗
2. Regulating pore structure of hierarchical porous waste cork‐derived hard carbon anode for enhanced na storage performance10.1002/aenm.201902852 ↗
3. Recent progress and future prospects on all-organic polymer dielectrics for energy storage capacitors10.1021/acs.chemrev.1c00793 ↗
4. Energy conversion and storage in fuel cells and super-capacitors from chemical modifications of carbon allotropes: state-of-art and prospect10.1246/bcsj.20210297 ↗
5. Reviving the lithium-manganese-based layered oxide cathodes for lithium-ion batteries10.1016/j.matt.2021.02.023 ↗
6. Intercalation chemistry of graphite: alkali metal ions and beyond10.1039/C9CS00162J ↗
7. Graphene-like ultrathin bismuth selenide nanosheets as highly stable anode material for sodium-ion battery10.1016/j.jallcom.2021.163572 ↗
8. The lithium-ion battery: two breakthroughs in development and two reasons for the nobel prize10.1246/bcsj.20210338 ↗
9. The emerging chemistry of sodium ion batteries for electrochemical energy storage10.1002/anie.201410376 ↗
10. Nanoengineering of advanced carbon materials for sodium-ion batteries10.1002/smll.202007431 ↗
11. Recent progress in rational design of anode materials for high-performance Na-ion batteries10.1016/j.ensm.2016.12.005 ↗
12. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
13. Flexible Na batteries10.1002/inf2.12027 ↗
14. Tuning the closed pore structure of hard carbons with the highest na storage capacity10.1021/acsenergylett.9b01900 ↗
15. A comprehensive review of stationary energy storage devices for large scale renewable energy sources grid integration10.1016/j.rser.2022.112213 ↗
16. Sodium-ion batteries10.1002/adfm.201200691 ↗
17. Hard–soft carbon composite anodes with synergistic sodium storage performance10.1002/adfm.201901072 ↗
18. Nanoconstruction and nanoeffect of phosphate-based cathode materials for advanced sodium-ion batteries10.1088/2399-1984/abc103 ↗
19. High performance sulphur-doped pitch-based carbon materials as anode materials for sodium-ion batteries10.1016/S1872-5805(20)60499-1 ↗
20. 2020 roadmap on two-dimensional materials for energy storage and conversion10.1016/j.cclet.2019.10.028 ↗
21. Pitch-derived amorphous carbon as high performance anode for sodium-ion batteries10.1016/j.ensm.2015.10.003 ↗
22. Unveiling pseudocapacitive behavior of hard carbon anode materials for sodium-ion batteries10.1016/j.electacta.2020.136647 ↗
23. Extended “Adsorption–Insertion” model: a new insight into the sodium storage mechanism of hard carbons10.1002/aenm.201901351 ↗
24. Bio-derived mesoporous disordered carbon: an excellent anode in sodium-ion battery and full-cell lab prototype10.1016/j.carbon.2018.11.038 ↗
25. Slope-dominated carbon anode with high specific capacity and superior rate capability for high safety Na-ion batteries10.1002/anie.201900005 ↗
26. High-yield microstructure-controlled amorphous carbon anode materials through a pre-oxidation strategy for sodium ion batteries10.1016/j.jallcom.2019.01.388 ↗
27. From charge storage mechanism to performance: a roadmap toward high specific energy sodium-ion batteries through carbon anode optimization10.1002/aenm.201703268 ↗
28. Intrinsic carbon-defect-driven electrocatalytic reduction of carbon dioxide10.1002/adma.201808276 ↗
29. The role of defect sites in nanomaterials for electrocatalytic energy conversion10.1016/j.chempr.2019.02.008 ↗
30. Low‐defect and low‐porosity hard carbon with high coulombic efficiency and high capacity for practical sodium ion battery anode10.1002/aenm.201703238 ↗
31. Effect of intrinsic defects of carbon materials on the sodium storage performance10.1002/aenm.201903652 ↗
32. Room-temperature sodium-ion batteries: improving the rate capability of carbon anode materials by templating strategies10.1039/c1ee01744f ↗
33. Preparation of carbon nanosheets from petroleum asphalt via recyclable molten-salt method for superior lithium and sodium storage10.1016/j.carbon.2017.06.086 ↗
34. Average molecular structure models of unaged asphalt binder fractions10.1617/s11527-021-01754-2 ↗
35. Molecular weight and aggregation of heavy petroleum fractions measured by vapor pressure osmometry and a hindered stepwise aggregation model10.1021/ef500749d ↗
36. Synthesis of a very high specific surface area active carbon and its electrical double-layer capacitor properties in organic electrolytes10.3390/chemengineering4030043 ↗
37. Enhancement in electrochemical performance of lithium‐sulfur cells through sulfur encapsulation in hollow carbon nanospheres coated with ultra‐thin aluminum fluoride layer10.1002/slct.201903932 ↗
38. Effects of intrinsic pentagon defects on electrochemical reactivity of carbon nanomaterials10.1002/anie.201813805 ↗
39. Evaluation of natural asphalt properties treated with egg shell waste and low density polyethylene
40. Group type analysis of asphalt by column liquid chromatography10.1080/10916460701205070 ↗
41. Ab initio molecular dynamics for open-shell transition metals10.1103/PhysRevB.48.13115 ↗
42. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
43. Chemical accuracy for the van der Waals density functional10.1088/0953-8984/22/2/022201 ↗
44. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
45. Laser-engineered heavy hydrocarbons: old materials with new opportunities10.1126/sciadv.aaz5231 ↗
46. Defect‐rich nitrogen doped Co3O4/C porous nanocubes enable high‐efficiency bifunctional oxygen electrocatalysis10.1002/adfm.201902875 ↗
47. Tailoring sodium intercalation in graphite for high energy and power sodium ion batteries10.1038/s41467-019-10551-z ↗
48. Sodium-storage behavior of electron-rich element-doped amorphous carbon10.1063/5.0029686 ↗
49. Commercial activated carbon as a novel precursor of the amorphous carbon for high-performance sodium-ion batteries anode10.1016/j.carbon.2017.12.008 ↗
50. Soft carbon as anode for high-performance sodium-based dual ion full battery10.1002/aenm.201602778 ↗
51. In-situ catalytic conversion of coal pyrolysis gas to nanoporous carbon rods and superior sodium ion storage performance10.1016/j.fuel.2020.118782 ↗
52. Apricot shell derived hard carbons and their tin oxide composites as anode materials for sodium-ion batteries10.1016/j.jallcom.2019.02.264 ↗
53. Raman spectroscopy on amorphous carbon films10.1063/1.362745 ↗
54. Sodium/potassium-ion batteries: boosting the rate capability and cycle life by combining morphology, defect and structure engineering10.1002/adma.201904320 ↗
55. Structure, composition, and chemical reactivity of carbon nanotubes by selective nitrogen doping10.1016/j.carbon.2005.11.027 ↗
56. The assembly of a composite based on nano-sheet graphene oxide and montmorillonite10.1007/s12182-018-0216-3 ↗
57. Easy conversion of protein-rich enoki mushroom biomass to a nitrogen-doped carbon nanomaterial as a promising metal-free catalyst for oxygen reduction reaction10.1039/C5NR03828F ↗
58. High-power lithium batteries from functionalized carbon-nanotube electrodes10.1038/nnano.2010.116 ↗
59. Boosting the electrical double‐layer capacitance of graphene by self‐doped defects through ball‐milling10.1002/adfm.201901127 ↗
60. Designing a slope-dominated hybrid nanostructure hard carbon anode for high-safety and high-capacity Na-ion batteries10.1039/D0TA08895A ↗
61. Defect engineering metal-free polymeric carbon nitride electrocatalyst for effective nitrogen fixation under ambient conditions10.1002/anie.201806386 ↗
62. Electroreduction of CO2 to CO on a mesoporous carbon catalyst with progressively removed nitrogen moieties10.1021/acsenergylett.8b01409 ↗
63. Electroreduction of carbon dioxide driven by the intrinsic defects in the carbon plane of a single Fe-N4 site10.1002/adma.202003238 ↗
64. Three-dimensional porous carbon doped with N, O and P heteroatoms as high-performance anode materials for sodium ion batteries10.1016/j.cej.2019.122457 ↗
65. Sulfur-grafted hollow carbon spheres for potassium-ion battery anodes10.1002/adma.201900429 ↗
66. Defect‐rich soft carbon porous nanosheets for fast and high‐capacity sodium‐ion storage10.1002/aenm.201803260 ↗