journal article·2022-11

Experimental investigation and thermodynamic description of the Co–Nb–Ti system

Dawei Wei, Xiaofeng Bai, Cuiping Guo, Changrong Li, Zhenmin Du

Publisher page

Abstract

The solidification microstructures of as-cast alloys and the equilibria microstructure of annealed alloys at 1273 K in the Co–Nb–Ti system were determined by scanning electron microscopy with energy dispersive spectroscopy (SEM/EDS) and X-ray diffraction (XRD), and the liquidus surface projection and partial isothermal section at 1273 K were constructed. Nine primary solidification regions, bcc(Nb,Ti), fcc(Co), Co 3Ti, CoTi, CoTi 2, λ 1, λ 2, λ 3 , and μ and five ternary invariant reactions, liq. → λ 1 + λ 2 + μ, liq. → CoTi + λ 2 + μ, liq. → bcc(Nb,Ti) + CoTi + μ, liq. + fcc(Co) + λ 3 → Co 3Ti, and liq. + CoTi → bcc(Nb,Ti) + CoTi 2 were experimentally determined or deduced in the liquidus surface projection. Three three-phase regions, CoTi + λ 2 + μ, bcc(Nb,Ti) + CoTi + μ, and bcc(Nb,Ti) + CoTi + CoTi 2 and six two-phase regions, Co 3Ti + λ 3, λ 2 + μ, CoTi + λ 2, CoTi + μ, bcc(Nb,Ti) + μ, and bcc(Nb,Ti) + CoTi at 1273 K were experimentally determined. The continuous compound λ 2 with a C15 structure from the Co–Nb side to Co–Ti side was formed at 1273 K. The solubilities of Ti in μ and Nb in CoTi were determined to be ~11.1 at% and ~18.4 at% at 1273 K, respectively. And no new phases were found. According to the available experimental data from the present work and literatures, the Co–Nb–Ti system was optimized by CALPHAD (CALculatiuon of PHAse Diagram) method. Four solution phases (liquid, bcc, fcc, and hcp) were described using the substitutional solution model. A two-sublattice model (Co,Nb,Ti) 2(Co,Nb,Ti) 1 was used to described three compounds λ 1, λ 2, and λ 3 according to their crystal structures and homogeneity ranges. Co 7Nb 2 and CoTi 2 were treated as Co 7(Nb,Ti) 2 and Co(Nb,Ti) 2 by a two-sublattice model, respectively. μ was treated as (Co,Nb,Ti) 1(Nb,Ti) 4(Co,Nb,Ti) 2(Co,Nb,Ti) 6 by a four-sublattice model. Co 3Ti with L1 2 structure and CoTi with B2 structure were treated as the ordered phases of fcc and bcc solutions using the thermodynamic models (Co,Nb,Ti) 0.75(Co,Nb,Ti) 0.25Va 1 and (Co,Nb,Ti,Va) 0.5(Co,Nb,Ti,Va) 0.5Va 3 , respectively. A set of self-consistent thermodynamic parameters of the Co–Nb–Ti system was obtained.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Reed · 2006
2. Experimental investigation and thermodynamic calculation of the phase equilibria in the Co–Nb–Ta ternary system10.1016/j.jallcom.2010.10.058 ↗
3. In-situ real time observation of martensite transformation in duplex fcc+hcp cobalt based entropic alloys10.1016/j.mtla.2020.100928 ↗
4. Inclusion engineering in Co-based duplex entropic alloys10.1016/j.matdes.2021.110097 ↗
5. Cobalt-base high-temperature alloys10.1126/science.1121738 ↗
6. Thermodynamic re-assessment of the Al–Co–W system10.1016/j.calphad.2017.09.007 ↗
7. Effect of Cr on the microstructure and oxidation properties of Co–Al–W superalloys studied by in situ environmental TEM10.1016/j.corsci.2019.108179 ↗
8. Effects of transition elements on the site preference, elastic properties and phase stability of L12 γ′-Co3(Al, W) from first-principles calculations10.1016/j.jallcom.2019.153179 ↗
9. A new Co-base superalloy strengthened by γ′ phase10.2320/matertrans.47.2099 ↗
10. Allotropic transformation induced stacking faults and discontinuous coarsening in a γ-γ′ Co-base alloy10.1016/j.intermet.2014.12.013 ↗
11. Effect of tungsten concentration on microstructures of Co–10Ni–6Al–(0,2,4,6)W–6Ti (at%) cobalt-based superalloys10.1016/j.msea.2017.06.018 ↗
12. Microstructure and creep strength of different γ/γ′-strengthened Co-base superalloy variants10.1016/j.scriptamat.2010.08.036 ↗
13. Experimental investigation of diagram equilibria in the Co–Nb–Re ternary system10.1007/s11669-019-00772-6 ↗
14. Microstructure and hydrogen permeability in Nb–Ti–Co multiphase alloys10.1016/j.jallcom.2006.01.028 ↗
15. Highly hydrogen permeable Nb–Ti–Co hypereutectic alloys containing much primary bcc-(Nb, Ti) phase10.1016/j.ijhydene.2012.06.005 ↗
16. Development of Nb–Ti–Co alloy for high-performance hydrogen separating membrane10.1016/j.memsci.2018.08.060 ↗
17. Nb–TiCo multiphase alloys: The significant impact of Ti/Co ratio on solidification path, microstructure and hydrogen permeability
18. Determination of isothermal sections of the Nb–Ti–Co ternary system at 1173 K
19. Isothermal section at 950 °C of the Co–Nb–Ti system10.1016/j.msea.2005.09.064 ↗
20. Experimental investigation of Ti–Nb–Co ternary system at 1000 °C10.1016/j.matdes.2016.11.056 ↗
21. Experimental investigation of isothermal sections at 1373 and 1473 K in the Co–Nb–Ti system10.1016/j.jallcom.2021.159406 ↗
22. Thermodynamic optimisation of the Co–Nb system10.1016/S0925-8388(97)00465-9 ↗
23. Thermodynamic re-assessment of the Co–Nb system
24. Thermodynamic description of the systems Co–Nb, Al–Nb and Co–Al–Nb10.1016/j.jallcom.2015.02.182 ↗
25. Key experiments and thermodynamic description of the Co–Nb–Ni system10.1007/s11661-020-05963-2 ↗
26. Preparation, phase stability and structure of the C36 Laves phase Nb1−xCo2+x
27. Experimental reinvestigation of the Co–Nb phase diagram10.1016/j.intermet.2008.02.017 ↗
28. Isothermal sections of the Co–Nb–Ni phase diagram at 1200 and 1375 K10.1016/j.jallcom.2018.01.256 ↗
29. Isothermal sections of the Co–Nb–Re phase diagram at 1200 and 1375 K10.1016/j.jallcom.2019.151777 ↗
30. Thermodynamic description of the Co–Ni–Ta system10.1016/j.calphad.2019.101649 ↗
31. Thermodynamic assessment of the Co–Ta system10.1016/j.calphad.2018.12.002 ↗
32. Thermodynamic modelling of the Co–Ti system10.1016/S0966-9795(99)00098-9 ↗
33. Determination of the CoTi congruent melting point and thermodynamic reassessment of the Co–Ti system10.1007/s11661-001-0193-8 ↗
34. Experimental determination and thermodynamic assessment of the Co–Ni–Ti system10.1016/j.calphad.2018.08.011 ↗
35. Thermodynamic description and simulation of solidification microstructure in the Co–Ti system10.1016/j.jct.2019.105995 ↗
36. Thermodynamic assessment of the Nb–Ti system10.1016/S0364-5916(01)00051-7 ↗
37. Jade 5.0, XRD Pattern Processing Materials Data Inc, 1999.
38. A.T. Dinsdale, SGTE Pure Elements (Unary) Database, 2006, Version 4.5.
39. Algebraic representation of thermodynamic properties and the classification of solutions10.1021/ie50458a036 ↗
40. Inden · 1976
41. A model for alloying in ferromagnetic metals10.1016/0364-5916(78)90011-1 ↗
42. Thermodynamic modelling of solutions and alloys10.1016/S0364-5916(97)00021-7 ↗
43. Mixed site occupancies in the μ phase10.1016/j.intermet.2004.04.036 ↗
44. Thermodynamic re-assessment of the ternary system Al–Cr–Ni10.1016/S0364-5916(01)00049-9 ↗
45. Thermodynamic assessment of the Al–Ni system10.1016/S0925-8388(96)02652-7 ↗
46. PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation10.1016/j.calphad.2008.08.004 ↗
47. The thermo-calc databank system10.1016/0364-5916(85)90021-5 ↗
48. Thermo-Calc and DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗