journal article·2022-10Open access

Assessment of the laser floating zone processing of thermoelectric CuFe1–xNixO2 delafossites and their magnetic characterisation

N.M. Ferreira, J.G. Grillo, M.C. Ferro, O.J. Dura, M.A. Madre, A.V. Kovalevsky, F.M. Costa, A. Sotelo

Abstract

This work assesses the feasibility of processing CuFe1-xNixO2 (x = 0, 0.02) using the Laser Floating Zone (LFZ) technique to grow fibres with different pulling rates, to tune their thermoelectric performance. Structural analysis showed CuFeO2 as the major phase. Formation of secondary phases is promoted by Ni addition, diminishing with decreasing pulling rate. Grain alignment and crystallite size of the fibres increase with the puling rate and doping. Electrical conductivity is enhanced by decreasing the pulling rate, while Ni-doping decreases the conductivity, and Seebeck coefficient demonstrates quite complex behaviour. Thermal conductivity decreases with temperature and with the pulling rate and Ni-doping. A maximum ZT value of 0.17 was achieved for 10 mm h-1 sample at 1000 K for pure, and 700 K for Ni-doped samples. These ZT values are higher than found in the literature, demonstrating the feasibility of the LFZ method for processing thermoelectric delafossites, indicating a proper optimisation process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. International Energy Agency - 〈https://www.iea.org/data-and-statistics?country=WORLD&fuel=Energy%20supply&indicator=Electricity%20generation%20by%20source〉, last access Jully 2021.
2. Estimating the global waste heat potential10.1016/j.rser.2015.12.192 ↗
3. Thermoelectric modules built using ceramic legs grown by laser floating zone10.1016/j.ceramint.2020.06.213 ↗
4. Development of Perovskite-Type materials for thermoelectric application10.3390/ma11060999 ↗
5. Abundances of chemical elements in the Earth’s crust10.1134/S001670290601006X ↗
6. Thermoelectric properties of Ca3Co4O9 ceramics10.1007/s11595-010-2287-x ↗
7. High thermoelectric performances in co-oxides processed by a laser floating zone technique
8. Recent development of n-type perovskite thermoelectrics
9. Effect of excess oxygen for CuFeO2.06 delafossite on thermoelectric and optical properties10.1016/j.physb.2017.09.046 ↗
10. Recent advances in oxide thermoelectric materials and modules10.1016/j.vacuum.2017.04.015 ↗
11. Electronic transition and electrical transport properties of delafossite CuCr1−xMgxO2 (0≤x≤12%) films prepared by the sol-gel method: a composition dependence study10.1063/1.4827856 ↗
12. Thin films preparation by rf-sputtering of copper/iron ceramic targets with Cu/Fe=1: From nanocomposites to delafossite compounds10.1016/j.tsf.2007.05.030 ↗
13. A facile novel synthesis of delafossite CuFeO2 powders10.1007/s10854-014-1801-x ↗
14. Characterization of delafossite-type CuCoO2 prepared by ion-exchange10.1016/j.jallcom.2009.09.124 ↗
15. Epitaxial growth of delafossite CuFeO2 thin films by pulsed laser deposition10.1016/j.physb.2012.03.037 ↗
16. Fe concentration dependences of microstructure and magnetic properties for CuCr1−xFexO2 ceramics10.1016/j.jallcom.2013.02.161 ↗
17. Laser processing of CaMnO3−d – based materials for thermoelectric applications
18. Growth rate effects on the thermoelectric performance of CaMnO3-based ceramics10.1016/j.jeurceramsoc.2019.06.011 ↗
19. Laser processing as a tool for designing donor-substituted calcium manganite-based thermoelectrics10.1016/j.jallcom.2020.154466 ↗
20. Tunning thermoelectric properties of Ca0.9Gd0.1MnO3 by laser processing
21. Electronic structure and thermoelectric properties of the delafossite-type oxides CuFe1–xNixO210.1007/s11664-009-0775-6 ↗
22. Large thermoelectric power in NaCo2O4 single crystals10.1103/PhysRevB.56.R12685 ↗
23. Ni-doping effect on thermoelectric properties of c-axis-oriented CuFeO2 ceramics10.1016/j.jallcom.2022.164192 ↗
24. Effect of Mg substitution in delafossite structured CuFeO2 thin film deposited on FTO coated glass substrate and its diode characteristics10.1016/j.tsf.2017.09.055 ↗
25. Effect of oxygen partial pressure on the phase stability of copper–iron delafossites at elevated temperatures10.3390/ma11101888 ↗
26. Advanced thermoelectric design: from materials and structures to devices10.1021/acs.chemrev.0c00026 ↗
27. Growth of CuFeO2 single crystals by the optical floating-zone technique10.1016/j.jcrysgro.2019.125426 ↗
28. High speed processing of NiFe2O4 spinel using a laser furnace
29. Tubular thermoelectric module based on oxide elements grown by the laser floating zone10.1021/acsaem.1c00677 ↗
30. Improving piezoelectric properties by controlling phase structure and crystal orientation10.1039/C7RA07711D ↗
31. 〈https://imagej.nih.gov/ij/〉, last access September 2021.
32. Phase separation in thermoelectric delafossite CuFe1−xNixO2 observed by soft X-ray magnetic circular dichroism10.1063/1.3609248 ↗
33. Influence of substrate temperature on delafossite CuFeO2 films synthesized by reactive magnetron sputtering10.1016/j.jallcom.2021.160169 ↗
34. Magnetic transitions in delafossite CuFeO2: a magnetocaloric effect study10.1016/j.physleta.2019.07.022 ↗
35. Ziman · 1972 · 221
36. Improving p-type thermoelectric performance of Mg2 (Ge,Sn) compounds via solid solution and Ag doping10.1016/j.intermet.2012.08.002 ↗
37. Thermoelectric iron oxides10.4028/www.scientific.net/AST.74.66 ↗