Unusual deformation-induced martensitic transformation in Fe-Co-Ni-Cr-Mn high entropy alloy thin films
Source abstract
Abstract
Deformation-induced martensitic transformation in Fe-Co-Ni-Cr-Mn high entropy alloy (HEA) thin film with nanocolumnar growth feature are revealed to readily occur at intermediate deposition power rather than low and high deposition power ranges. The high probability of deformation-induced martensitic transformation from face-centered cubic (FCC) to hexagonal close-packed (HCP) phase in 150 W-film results in low nanoindentation hardness and compressive yield strength, in comparison with 60 W- and 210 W-films. Dependence of the martensitic transformation probability has been explained in terms of the competition between grain size effect and nanocolumn cohesion effect on the phase metastability. The increased grain size with deposition power favors the mechanical instability of FCC parent phase caused by the weakened slip obstruction, while the enhanced nanocolumn cohesion with deposition power hinders the formation of HCP martensite due to the increased activation energy for martensitic transformation. The grain size effect is dominated over the cohesion between nanocolumn at low deposition power range, while column cohesion effect is dominant at high deposition power range, which gives rise to the crossover of FCC-to-HCP with deposition power. This work might provide a deeper understanding in phase metastability of sputtered films, for instance, the effect of deposition power on deformation-induced martensitic transformation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Tailoring phase transformation strengthening and plasticity of nanostructured high entropy alloys10.1039/D0NR02483J ↗
2. Microstructure and properties of a Co-free Fe50Mn27Ni10Cr13 high entropy alloy10.1016/j.jallcom.2020.156842 ↗
3. Tuning microstructure and enhancing mechanical properties of Co-Ni-V-Al medium entropy alloy thin films via deposition power10.1016/j.jallcom.2021.160003 ↗
4. Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures10.1016/j.intermet.2014.06.015 ↗
5. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation10.1016/j.actamat.2015.06.025 ↗
6. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
7. A study on the Hall-Petch relationship and grain growth kinetics in FCC-structured high/medium entropy alloys10.3390/e21030297 ↗
8. Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation10.1126/sciadv.aba9543 ↗
9. Martensitic transformation and mechanical behavior of a medium-entropy alloy10.1016/j.msea.2020.139371 ↗
10. Remarkable ductility in metastable refractory high entropy alloys via BCC-FCC/α “martensitic transformations
11. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity10.1016/j.actamat.2017.07.023 ↗
12. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
13. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
14. Mechanical properties and deformation twinning behavior of as-cast CoCrFeMnNi high-entropy alloy at low and high temperatures10.1016/j.msea.2017.11.081 ↗
15. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
16. Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi10.1016/j.actamat.2017.02.036 ↗
17. Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy10.1126/sciadv.abb3108 ↗
18. TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
19. Effect of β grain size on stress induced martensitic transformation in β solution treated Ti–10V–2Fe–3Al alloy10.1016/j.scriptamat.2005.03.039 ↗
20. Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity10.1080/21663831.2016.1221861 ↗
21. Phase transformations in body-centered cubic NbxHfZrTi high-entropy alloys10.1016/j.matchar.2018.06.012 ↗
22. Tuning nanostructure and mechanical property of Fe-Co-Ni-Cr-Mn high-entropy alloy thin films by substrate temperature
23. Temperature dependent stacking fault energy of FeCrCoNiMn high entropy alloy10.1016/j.scriptamat.2015.05.041 ↗
24. Mechanical properties and stacking fault energies of NiFeCrCoMn high-entropy alloy10.1007/s11837-013-0771-4 ↗
25. Determination of critical cooling rates in metallic glass forming alloy libraries through laser spike annealing10.1038/s41598-017-07719-2 ↗
26. Symbiotic crystal-glass alloys via dynamic chemical partitioning10.1016/j.mattod.2021.10.025 ↗
27. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
28. Influence of indenter tip geometry on elastic deformation during nanoindentation10.1103/PhysRevLett.95.045501 ↗
29. Superelastic effect in Ti-rich high entropy alloys via stress-induced martensitic transformation10.1016/j.scriptamat.2018.10.035 ↗
30. Investigation of the martensitic transformation and the damping behavior of a superelastic Ti–Ta–Nb alloy10.1016/j.actamat.2012.09.065 ↗
31. The martensitic transformation in the iron-nickel system10.1007/BF03377892 ↗
32. Thermally- and stress-induced thermoelastic martensitic transformations in the reference frame of equilibrium thermodynamics10.1016/0079-6425(93)90005-6 ↗
33. The concern of elasticity in stress-induced martensitic transformation in NiTi10.1016/S0921-5093(98)00959-9 ↗
34. A TWIP-TRIP quinary high-entropy alloy: tuning phase stability and microstructure for enhanced mechanical properties