The intrinsic mechanical properties of NbTaTiZr and the influence of alloying elements Mo and W: A first-principles study
Source abstract
Abstract
The intrinsic mechanical properties of NbTaTiZr and NbTaTiZrX (X Mo, W) are studied by using a first-principles calculation in combination with special quasi-random structure. For NbTaTiZr RHEA, the ideal tensile strength (ITS) and compressive strength (ICS) along [001] direction is respectively calculated to be 5.64 GPa and −18.4Gpa at the strain 11% and −20%. For shear loading along (211)[111] slip system, the ideal shear strength (ISS) is 3.03 GPa as the strain is about 20%. With addition of Mo into NbTaTiZr, the ITS, ICS and ISS respectively increase up to 9.7, −19.3 and 4.73 GPa, and the addition of W enhances the ITS, ICS and ISS up to 10.5, −21.1 and 5.12 GPa, respectively. Hence addition of Mo or W can significantly improve the ideal strength, especially stronger impact of W element. The calculated elastic moduli E [001] and G [111] are in reasonable agreement with the initial slope of the stress-strain relationship. The derived dimensionless ITS and ISS from first-principle calculations is underestimated the ideal strength in comparison with the prediction by the universal empirical model. Then the microcosmic mechanism is further studied by examination of the detailed bond length variation of three HEAs during the corresponding deformation. Near the critical strain under of tension and shear, the slower descend of stress originates from the gradual breakage of atomic bonds, while the compressive stress decreases rapidly owing to all bond fracturing almost simultaneously. Finally, the ideal strength of three HEAs is further analyzed from electronic structure.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Ideal strength of bcc molybdenum and niobium10.1103/PhysRevB.66.094110 ↗
2. The ideal strength of iron in tension and shear10.1016/S1359-6454(03)00033-8 ↗
3. "Ideal" engineering alloys10.1103/PhysRevLett.98.105503 ↗
4. Anomalies in the response of V, Nb, and Ta to tensile and shear loading: Ab initiodensity functional theory calculations10.1103/PhysRevB.81.094108 ↗
5. Tuning ideal tensile strengths and intrinsic ductility of bcc refractory alloys10.1103/PhysRevLett.112.115503 ↗
6. The ideal tensile strength and deformation behavior of a tungsten single crystal10.1016/j.nimb.2009.06.088 ↗
7. Stability and strength of covalent crystals under uniaxial and triaxial loading from first principles10.1088/0953-8984/25/3/035401 ↗
8. First-principles investigation on ideal strength of B2 NiAl and NiTi alloys
9. Dependence of mechanical properties on the site occupancy of ternary alloying elements in γ′-Ni3Al: Ab initio description for shear and tensile deformation10.1088/1674-1056/ab8a38 ↗
10. Effects of boron and carbon on the ideal strength of Ni solution and Ni3Al intermetallics: a first-principles study of tensile deformation10.1016/j.commatsci.2017.08.041 ↗
11. First-principles study of PbTiO3 under uniaxial strains and stresses10.1103/PhysRevB.90.214102 ↗
12. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
13. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
14. Powder metallurgy processing of a WxTaTiVCr high-entropy alloy and its derivative alloys for fusion material applications10.1038/s41598-017-02168-3 ↗
15. Mechanical properties of low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system10.1016/j.msea.2012.12.018 ↗
16. Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials10.1016/j.scriptamat.2016.10.028 ↗
17. Compositional design of strong and ductile (tensile) Ti-Zr-Nb-Ta medium entropy alloys (MEAs) using the atomic mismatch approach10.1016/j.msea.2018.11.054 ↗
18. Effects of deposition temperature on the nanomechanical properties of refractory high entropy TaNbHfZr films10.1016/j.jallcom.2019.05.121 ↗
19. First-principle calculation investigation of NbMoTaW based refractory high entropy alloys10.1016/j.jallcom.2020.153963 ↗
20. New ternary equi-atomic refractory medium-entropy alloys with tensile ductility: Hafnium versus titanium into NbTa-based solution10.1016/j.intermet.2019.01.004 ↗
21. Design of single-phase high-entropy alloys composed of low thermal neutron absorption cross-section elements for nuclear power plant application10.1016/j.intermet.2018.11.001 ↗
22. Design of high-ductile medium entropy alloys for dental implants10.1016/j.msec.2020.110959 ↗
23. Compositional variation effects on the microstructure and properties of a refractory high-entropy superalloy AlMo0.5NbTa0.5TiZr10.1016/j.matdes.2017.11.033 ↗
24. Cuboid-like nanostructure strengthened equiatomic Ti-Zr-Nb-Ta medium entropy alloy10.1016/j.msea.2020.140169 ↗
25. A novel quaternary equiatomic Ti-Zr-Nb-Ta medium entropy alloy (MEA)10.1016/j.intermet.2018.07.008 ↗
26. Duality in dislocation density-superelasticity correlation in a TNTZ bio alloy processed by cold rolling and subsequent annealing10.1016/j.msea.2020.139181 ↗
27. An ab initio investgation of ideal tensile and shear strength of TiVNbMo high-entropy alloy10.1016/j.matlet.2015.12.064 ↗
28. Tensile and shear loading of four fcc high-entropy alloys: a first-principles study
29. Ab initio-predicted micro-mechanical performance of refractory high-entropy alloys10.1038/srep12334 ↗
30. TiZrNbTaMo high-entropy alloy designed for orthopedic implants: as-cast microstructure and mechanical properties10.1016/j.msec.2016.12.057 ↗
31. Solidification microstructures of the ingots obtained by arc melting and cold crucible levitation melting in TiNbTaZr medium-entropy alloy and TiNbTaZrX (X = V, Mo, W) high-entropy alloys10.3390/e21050483 ↗
32. Experimental and theoretical study of Ti20Zr20Hf20Nb20X20 (X=V or Cr) refractory high-entropy alloys10.1016/j.ijrmhm.2014.07.009 ↗
33. The elastic and mechanical properties of MB12 (M=Zr, Hf, Y, Lu) as a function of pressure10.1016/j.jallcom.2012.08.062 ↗
34. Electronic structures, mechanical and thermodynamic properties of cubic alkaline-earth hexaborides from first principles calculations10.1016/j.jallcom.2015.02.128 ↗
35. Elastic properties of AlxCrMnFeCoNi (0 ≤ x ≤ 5) high-entropy alloys from ab initio theory10.1016/j.actamat.2018.05.050 ↗
36. First principles investigation of the structural, elastic, electronic and vibrational properties of vanadium-based V3X (X = Fe, Co, and Ni) compounds10.1016/j.jpcs.2020.109854 ↗
37. Applying a machine learning interatomic potential to unravel the effects of local lattice distortion on the elastic properties of multi-principal element alloys10.1016/j.jallcom.2019.06.318 ↗
38. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
39. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
40. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
41. The alloy theoretic automated toolkit: a user guide10.1016/S0364-5916(02)80006-2 ↗
42. Multicomponent multisublattice alloys, nonconfigurational entropy and other additions to the alloy theoretic automated toolkit10.1016/j.calphad.2008.12.005 ↗
43. Elastic anisotropy of γ′-Fe4N and elastic grain interaction in γ′-Fe4N1−y layers on α-Fe: First-principles calculations and diffraction stress measurements10.1016/j.actamat.2007.07.001 ↗
44. The elastic behaviour of a crystalline aggregate10.1088/0370-1298/65/5/307 ↗
45. Ideal strength of random alloys from first principles10.1103/PhysRevB.87.214203 ↗
46. Anomalous ideal tensile strength of ferromagnetic Fe and Fe-rich alloys
47. Shear instabilities in perfect bcc crystals during simulated tensile tests10.1103/PhysRevB.87.014117 ↗
48. Influence of superimposed biaxial stress on the tensile strength of perfect crystals from first principles10.1103/PhysRevB.76.024115 ↗
49. Theoretical study of the response of 12 cubic metals to uniaxial loading10.1103/PhysRevB.58.6006 ↗
50. Ideal strengths of bcc metals10.1016/S0921-5093(01)00998-4 ↗
51. Ideal tensile strength of cubic crystals under superimposed transverse biaxial stresses from first principles10.1103/PhysRevB.82.174106 ↗
52. Mechanical performance of FeCrCoMnAl high-entropy alloys from first-principle10.1016/j.matchemphys.2017.08.061 ↗
53. First-principles calculations for development of low elastic modulus Ti alloys10.1103/PhysRevB.70.174113 ↗
54. A theoretical study of the stability, mechanical and thermal properties of AlNiCuCo equimolar high entropy alloy10.1016/j.physleta.2020.126797 ↗
55. Elastic stability and the limits of strength10.4028/www.scientific.net/MSF.426-432.4429 ↗
56. Ideal shear strain of metals and ceramics10.1103/PhysRevB.70.104104 ↗
57. Effect of the alloying element on the temperature-dependent ideal shear strength of γ′-Ni3Al10.1039/C5RA24108A ↗
58. Electronic structure, bonding, and ground-state properties of AlB2-type transition-metal diborides10.1103/PhysRevB.63.045115 ↗