journal article·2022-05

Recognizing the nitrogen/oxygen co-doped lithiophilicity chemistry toward molten Li infusion for fabricating composite Li metal anode

Shengdong Zhu, Jian Chen

Publisher page

Abstract

Structured Li anode is a strong candidate for reviving lithium metal anode in high-energy-density rechargeable batteries, suppressing the dendrite growth and stabilizing the volume change. However, the lithiophilicity chemistry and lightweight design of substrates remain a challenge to assemble composited anode. Herein, we report a N/O co-doped carbon fiber (NOCF) and its intrinsic lithiophilicity chemistry for fabricating Li structured anode (CF/Li). The experimental lithiophilicity comparison of different N-functional groups demonstrates that the increasing ratio of quaternary N and N-oxides can turn a lithiophobic surface into the lithiophilic NOCF than pyrrolic and pyridine N as previously estimated. Thanks to the lightweight NOCF, the fabricated CF/Li anode achieves 3142 mAh g −1 capacity, equivalent to 82% theoretical capacity of lithium metal. Notably, the CF/Li composited anode presents outstanding electrochemical and structural stability with inhibited dendrites during the Li stripping/plating process. Even at an ultrahigh current density of 10 mA cm −2, the CF/Li still exhibits lower polarization (141.1 mV) and a smoother voltage profile for 500 cycles. In Li-LFP cells, the CF/Li also delivers better cycling and rate performance than the commercial Li foils.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Electrical energy storage for transportation-approaching the limits of, and going beyond, lithium-ion batteries10.1039/c2ee21892e ↗
2. Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries10.1038/s41560-017-0047-2 ↗
3. The Energy-storage Frontier: Lithium-ion Batteries And Beyond
4. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
5. Historical development of secondary lithium batteries10.1016/0167-2738(94)90408-1 ↗
6. Before Li ion batteries10.1021/acs.chemrev.8b00422 ↗
7. The electrochemical behavior of alkali and alkaline earth metals in nonaqueous battery systems-the solid electrolyte interphase model10.1149/1.2128859 ↗
8. A mathematical model for the lithium-ion negative electrode solid electrolyte interphase10.1149/1.1804812 ↗
9. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
10. Reviving the lithium metal anode for high-energy batteries10.1038/nnano.2017.16 ↗
11. Dendrite-free lithium deposition via self-healing electrostatic shield mechanism10.1021/ja312241y ↗
12. Vinylene carbonate-LiNO3: a hybrid additive in carbonic ester electrolytes for SEI modification on Li metal anode10.1016/j.elecom.2014.12.008 ↗
13. Comparative study of imide-based Li salts as electrolyte additives for Li-ion batteries10.1016/j.jpowsour.2017.11.045 ↗
14. Tuning the solution structure of electrolyte for optimal solid-electrolyte-interphase formation in high-voltage lithium metal batteries10.1016/j.jechem.2021.01.007 ↗
15. Li 2 S 5 -based ternary-salt electrolyte for robust lithium metal anode10.1016/j.ensm.2016.01.007 ↗
16. Stabilizing Li metal anodes through a novel self-healing strategy10.1021/acssuschemeng.8b02564 ↗
17. Surface fluorination of reactive battery anode materials for enhanced stability10.1021/jacs.7b05251 ↗
18. Interconnected hollow carbon nanospheres for stable lithium metal anodes10.1038/nnano.2014.152 ↗
19. Porous LiF layer fabricated by a facile chemical method toward dendrite-free lithium metal anode10.1016/j.jechem.2019.03.014 ↗
20. Solid-state polymer electrolytes with in-built fast interfacial transport for secondary lithium batteries10.1038/s41560-019-0349-7 ↗
21. Styrene-based poly(ethylene oxide) side-chain block copolymers as solid polymer electrolytes for high-voltage lithium-metal batteries10.1021/acsami.1c08841 ↗
22. Issues and advances in scaling up sulfide-based all-solid-state batteries10.1021/acs.accounts.1c00333 ↗
23. Design of complex nanomaterials for energy storage: past success and future opportunity10.1021/acs.accounts.7b00450 ↗
24. Stable and dendrite-free lithium metal anodes enabled by carbon paper incorporated with ultrafine lithiophilic TiO2 derived from MXene and carbon dioxide10.1016/j.cej.2020.126836 ↗
25. Honeycomb-like porous 3D nickel electrodeposition for stable Li and Na metal anodes10.1016/j.ensm.2017.11.011 ↗
26. Graphene anchored on Cu foam as a lithiophilic 3D current collector for a stable and dendrite-free lithium metal anode10.1039/C8TA02810A ↗
27. Heteroatom-doped 3D porous carbon architectures for highly stable aqueous zinc metal batteries and non-aqueous lithium metal batteries10.1016/j.cej.2020.125843 ↗
28. Heterogeneous nucleation and growth of electrodeposited lithium metal on the basal plane of single-layer graphene10.1016/j.ensm.2018.06.024 ↗
29. Crumpled graphene balls stabilized dendrite-free lithium metal anodes10.1016/j.joule.2017.11.004 ↗
30. Lithium batteries with nearly maximum metal storage10.1021/acsnano.7b02731 ↗
31. Feasibility of a SPherical Hollow Carbon Framework as A Stable Host Material for Reversible Metallic Li storage10.1021/acsami.1c10678 ↗
32. Lightweight shield to stabilize Li metal anodes at high current rates10.1021/acsaem.1c02770 ↗
33. Layered reduced graphene oxide with nanoscale interlayer gaps as a stable host for lithium metal anodes10.1038/nnano.2016.32 ↗
34. Lithium-coated polymeric matrix as a minimum volume-change and dendrite-free lithium metal anode10.1038/ncomms10992 ↗
35. Highly reversible Li plating confined in three-dimensional interconnected microchannels toward high-rate and stable metallic lithium anodes10.1021/acsami.8b02619 ↗
36. ZnO/carbon framework derived from metal-organic frameworks as a stable host for lithium metal anodes10.1016/j.ensm.2017.10.016 ↗
37. Highly conductive and robust three-dimensional host with excellent alkali metal infiltration boosts ultrastable lithium and sodium metal anodes10.1021/acsami.8b03572 ↗
38. CoO nanofiber decorated nickel foams as lithium dendrite suppressing host skeletons for high energy lithium metal batteries10.1016/j.ensm.2018.05.017 ↗
39. Fabrication and characterization of Li-coated nickel mesh for anode of lithium-metal batteries10.1016/j.jallcom.2019.03.281 ↗
40. Enabling stable lithium metal anode via 3D inorganic skeleton with superlithiophilic interphase10.1002/aenm.201802350 ↗
41. Coralloid carbon fiber-based composite lithium anode for robust lithium metal batteries10.1016/j.joule.2018.02.001 ↗
42. Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating10.1073/pnas.1518188113 ↗
43. Coupling of triporosity and strong Au–Li interaction to enable dendrite-free lithium plating/stripping for long-life lithium metal anodes10.1039/D0TA04768F ↗
44. Fundamental study on the wetting property of liquid lithium10.1016/j.ensm.2018.05.021 ↗
45. Single-atom iron as lithiophilic site to minimize lithium nucleation overpotential for stable lithium metal full battery10.1021/acsami.9b10551 ↗
46. Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite-free lithium metal anodes10.1002/anie.201702099 ↗
47. Lithiophilicity chemistry of heteroatom-doped carbon to guide uniform lithium nucleation in lithium metal anodes10.1126/sciadv.aau7728 ↗
48. Stable lithium electrodeposition at ultra-high current densities enabled by 3D PMF/Li composite anode10.1002/aenm.201703360 ↗
49. Uniform lithium nucleation/growth induced by lightweight nitrogen-doped graphitic carbon foams for high-performance lithium metal anodes
50. Altering polythiophene derivative substrates to explore the mechanism of heterogeneous lithium nucleation for dendrite-free lithium metal anodes10.1016/j.jechem.2020.10.035 ↗
51. Lithiophilic diffusion barrier layer on stainless steel mesh for dendrite suppression and stable lithium metal anode
52. A 3D and stable lithium anode for high-performance lithium–iodine batteries
53. Self-smoothing anode for achieving high-energy lithium metal batteries under realistic conditions10.1038/s41565-019-0427-9 ↗
54. A highly stable lithium metal anode enabled by Ag nanoparticle–embedded nitrogen-doped carbon macroporous fibers10.1126/sciadv.abg3626 ↗
55. Oxygen and nitrogen co-doped porous carbon granules enabling dendrite-free lithium metal anode10.1016/j.ensm.2018.08.018 ↗
56. Raman microspectroscopy of soot and related carbonaceous materials: spectral analysis and structural information10.1016/j.carbon.2005.02.018 ↗
57. A review of nitrogen-doped graphene catalysts for proton exchange membrane fuel cells-synthesis, characterization, and improvement10.1016/j.nanoso.2017.09.003 ↗