High-performance lithium-sulfur battery enabled by jointing cobalt decorated interlayer and polyethyleneimine functionalized separator
Source abstract
Abstract
Abstract Lithium-sulfur (Li-S) battery is considered as one of the most promising alternatives for next-generation electrochemical energy storage systems due to its high energy density and low cost. Unfortunately, several issues of Li-S battery, such as sluggish reaction kinetics, severe polysulfides shuttle effect and volume expansion, still hinder the commercialization of Li-S battery. Herein, a synergistic strategy is proposed, which comprises polyethyleneimine (PEI)-multi-walled carbon nanotube-Super P (PMS) coating modified on PP separator and uniformly distributed cobalt nanocrystals in N-doped porous carbon nanofiber (Co/PCNF) as a freestanding interlayer in the cathodic side of Li-S battery. Benefiting from abundant amino/imine groups of protonated PEI and catalytic Co active sites in conductive porous carbon skeleton, the Co/PCNF-PMS bilayer architecture can not only intensely anchor the negatively charged polysulfides via electrostatic interaction but also fast electrocatalyze the sulfur redox reaction. The synergistic effect of the Co/PCNF-PMS bilayer enable the Li-S battery with a high initial capacity of 1537 mAh g−1 at 200 mA g−1, extended cycling stability of only 0.06% per cycle capacity fade over 300 cycles at 2000 mA g−1 and outstanding performance under high raised sulfur loading up to 6 mg cm−2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Rational design of nanostructured functional interlayer/separator for advanced Li-S batteries
2. Lithium-sulfur battery cable made from ultralight, flexible graphene/carbon nanotube/sulfur composite fibers10.1002/adfm.201604815 ↗
3. A high-efficiency sulfur/carbon composite based on 3d graphene nanosheet@carbon nanotube matrix as cathode for lithium-sulfur battery
4. Advanced sulfur cathode enabled by highly crumpled nitrogen-doped graphene sheets for high-energy-density lithium-sulfur batteries10.1021/acs.nanolett.5b03217 ↗
5. Structure design and composition engineering of carbon-based nanomaterials for lithium energy storage10.1002/aenm.201903030 ↗
6. Investigation on fabrication of reduced graphene oxide-sulfur composite cathodes for Li-S battery via hydrothermal and thermal reduction methods10.3390/ma14040861 ↗
7. Enabling a stable room-temperature sodium-sulfur battery cathode by building heterostructures in multichannel carbon fibers10.1021/acsnano.1c00804 ↗
8. Boosting Li-S battery by rational design of freestanding cathode with enriched anchoring and catalytic N-sites carbonaceous host10.1016/j.carbon.2019.05.022 ↗
9. Copper-stabilized sulfur-microporous carbon cathodes for Li-S batteries10.1002/adfm.201304156 ↗
10. Implanting atomic cobalt within mesoporous carbon toward highly stable lithium-sulfur batteries10.1002/adma.201903813 ↗
11. The superior cycle and rate performance of a novel sulfur cathode by immobilizing sulfur into porous N-doped carbon microspheres10.1039/C4CC04868G ↗
12. Insight to the synergistic effect of N-doping level and pore structure on improving the electrochemical performance of sulfur/N-doped porous carbon cathode for Li-S batteries10.1016/j.carbon.2018.12.113 ↗
13. A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries10.1038/nmat2460 ↗
14. Review on high-loading and high-energy lithium-sulfur batteries
15. Functional design of separator for Li-S batteries
16. Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer10.1038/ncomms2163 ↗
17. Crosslinked cyanometallate-chitosan nanosheet assembled aerogels as efficient catalysts to boost polysulfide redox kinetics in lithium-sulfur batteries10.1039/D0TA04910G ↗
18. Synergistically enhanced polysulfide chemisorption using a flexible hybrid separator with N and S dual-doped mesoporous carbon coating for advanced lithium-sulfur batteries10.1021/acsami.6b03642 ↗
19. A two-dimensional porous carbon-modified separator for high-energy-density Li-S batteries10.1016/j.joule.2017.12.003 ↗
20. Bifunctional fluorinated separator enabling polysulfide trapping and Li deposition for lithium-sulfur batteries10.1021/acsami.0c22190 ↗
21. Synergetic protective effect of the ultralight MWCNTs/NCQDs modified separator for highly stable lithium-sulfur batteries10.1002/aenm.201702288 ↗
22. Porous nitrogen-doped carbon nanofibers assembled with nickel nanoparticles for lithium-sulfur batteries10.1039/C8NR07220E ↗
23. Integrating conductivity and active sites: Fe/Fe3C@GNC as an trapping-catalyst interlayer and dendrite-free lithium host for the lithium-sulfur cell with outstanding rate performance10.1039/D0TA06862D ↗
24. A lightweight TiO2/graphene interlayer, applied as a highly effective polysulfide absorbent for fast, long-life lithium-sulfur batteries10.1002/adma.201405637 ↗
25. High-energy, high-rate, lithium-sulfur batteries: synergetic effect of hollow TiO2-webbed carbon nanotubes and a dual functional carbon-paper interlayer10.1002/aenm.201501480 ↗
26. A multifunctional SnO2-nanowires/carbon composite interlayer for high- performance lithium-sulfur batteries10.1016/j.cej.2020.126042 ↗
27. Fast electrochemical kinetics and strong polysulfide adsorption by a highly oriented MoS2 nanosheet@N-doped carbon interlayer for lithium-sulfur batteries10.1039/C9TA00458K ↗
28. Padding molybdenum net with graphite/MoO3 composite as a multifunctional interlayer enabling high-performance lithium-sulfur batteries10.1016/j.jpowsour.2018.07.017 ↗
29. Cobalt in nitrogen-doped graphene as single-atom catalyst for high-sulfur content lithium-sulfur batteries10.1021/jacs.8b12973 ↗
30. Co-N-C in porous carbon with enhanced lithium ion storage properties10.1016/j.cej.2020.124377 ↗
31. Atomic iron catalysis of polysulfide conversion in lithium-sulfur batteries10.1021/acsami.8b03830 ↗
32. Theoretical calculation guided design of single-atom catalysts toward fast kinetic and long-life Li-S batteries10.1021/acs.nanolett.9b04719 ↗
33. Single nickel atoms on nitrogen-doped graphene enabling enhanced kinetics of lithium-sulfur batteries
34. Kinetically elevated redox conversion of polysulfides of lithium-sulfur battery using a separator modified with transition metals coordinated g-C3N4 with carbon-conjugated10.1016/j.cej.2019.123905 ↗
35. Boosting polysulfide redox kinetics by graphene-supported Ni nanoparticles with carbon coating10.1002/aenm.202000907 ↗
36. MnO2 nanosheets grown on the internal/external surface of N-doped hollow porous carbon nanospheres as the sulfur host of advanced lithium-sulfur batteries10.1016/j.cej.2017.11.039 ↗
37. CoS-interposed and Ketjen black-embedded carbon nanofiber framework as a separator modulation for high performance Li-S batteries10.1016/j.cej.2019.03.034 ↗
38. Three-dimensional MoS2/Carbon sandwiched architecture for boosted lithium storage capability10.1016/j.nanoen.2019.104061 ↗
39. Leaf-inspired design of mesoporous Sb2S3/N-doped Ti3C2Tx composite towards fast sodium storage10.1007/s11426-020-9942-9 ↗
40. 2D MoN-VN heterostructure to regulate polysulfides for highly efficient lithium-sulfur batteries10.1002/anie.201810579 ↗
41. Metal-organic framework-based separator for lithium-sulfur batteries10.1038/nenergy.2016.94 ↗
42. Rational design of statically and dynamically stable lithium-sulfur batteries with high sulfur loading and low electrolyte/sulfur ratio10.1002/adma.201705951 ↗
43. Fast conversion and controlled deposition of lithium (poly)sulfides in lithium-sulfur batteries using high-loading cobalt single atoms10.1016/j.ensm.2020.05.022 ↗
44. Vertically rooting multifunctional tentacles on carbon scaffold as efficient polysulfide barrier toward superior lithium-sulfur batteries10.1016/j.nanoen.2019.103905 ↗
45. Spider-web-inspired nanocompositemodified separator: structural and chemical cooperativity inhibiting the shuttle effect in Li-S batteries
46. Boosting high-rate Li-S batteries by an MOF-derived catalytic electrode with a layer-by-layer structure
47. Silver nanoparticle-doped 3D porous carbon nanofibers as separator coating for stable lithium metal anodes10.1021/acsami.9b04122 ↗
48. In-situ decoration of MOF-derived carbon on nitrogen-doped ultrathin MXene nanosheets to multifunctionalize separators for stable Li-S batteries10.1016/j.cej.2019.05.119 ↗
49. Recent progress in designing stable composite lithium anodes with improved wettability10.1002/advs.202002212 ↗