journal article·2020-03

Towards improving low-temperature degradation of zirconia/alumina ceramics via in-situ formation of an Al2O3 functional surface layer through sintering in the presence of graphite powder

M.H. Bocanegra-Bernal, A. Garcia-Reyes, C. Dominguez-Rios, A. Reyes-Rojas, A. Aguilar-Elguezabal, J. Echeberria

Publisher page

Abstract

Abstract Zirconia (ZrO2) and alumina (Al2O3) ceramics are used in technical and biomedical applications. The great challenge in ZrO2-based ceramics, to improve their mechanical properties, is to take control of the stress-activated t → m martensitic transformation, since this transformation causes accelerated low-temperature degradation (LTD) under ambient conditions, leading to premature failure by the presence of water or its vapor. Dispersion of Al2O3 in a ZrO2 matrix, the so-called alumina toughened zirconia (ATZ), can restrain LTD of mechanical properties of zirconia, however exposure of zirconia to moisture must be avoided to suppress the t → m transformation. In this paper, the in-situ formation of an alumina layer surrounding ATZ pieces, during sintering under the presence of graphitic compounds and a low oxygen atmosphere, is reported. The layer formation mechanism consists of the reaction of CO with Al2O3 during the heating of the specimens, where a volatile species of aluminum forms, which, on contact with the specimen surface and due to the presence of CO2, is oxidized to the non-volatile Al2O3, thus forming the surface layer. This approach improves the hydrothermal stability and enhances the possibility of applying ATZ in ceramic implants, solid oxide fuel cells, and thermal barrier coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Sintering in a graphite powder bed of alumina-toughened zirconia/carbon nanotube composites: a novel way to delay hydrothermal degradation10.1016/j.ceramint.2014.11.155 ↗
2. Toughening of brittle solids by martensitic transformations
3. Ceramic steel?10.1038/258703a0 ↗
4. Claussen · 1987
5. Martensitic transformation in zirconia10.1002/pssa.2210210102 ↗
6. Low temperature degradation-ageing of zirconia: a critical review of the relevant aspects in dentistry10.1016/j.dental.2010.04.006 ↗
7. Environmental degradation of zirconia ceramics10.1016/0955-2219(95)00035-S ↗
8. The effect of an additional alumina layer in improvement of plasma sprayed TBCs during high temperature applications
9. High temperature deformability of ductile flash-sintered ceramics via in-situ compression10.1038/s41467-018-04333-2 ↗
10. Low-temperature ageing map for 3 mol% Y2O3–ZrO210.1007/BF01107426 ↗
11. Residual stresses in machined ceramic surfaces10.1111/j.1151-2916.1986.tb04691.x ↗
12. Weeren · 1999
13. Process development for additive manufacturing of functionally graded alumina toughened zirconia components intended for medical implant application10.1016/j.jeurceramsoc.2018.09.003 ↗
14. ATZ - a new material with a high potential in joint replacement10.4028/www.scientific.net/KEM.284-286.983 ↗
15. An alumina toughened zirconia composite for dental implant application: in Vivo animal results
16. A general process for in-situ formation of functional surface layers on ceramics10.1038/416064a ↗
17. Influence of a CVD carbon coating on the mechanical property stability of nicalon silicon carbide fibre10.1016/0266-3538(90)90092-J ↗
18. Focused ion beam preparation and microscopy investigation of secondary layer on carbon-bonded alumina filter after steel contact10.1016/j.ceramint.2018.05.065 ↗
19. Review of inorganic coatings and coating processes for reducing wear and corrosion10.1179/000705999101500815 ↗
20. New ZrO2/Al2O3 nanocomposite fabricated from hybrid nanoparticles prepared by CO2 laser co-vaporisation10.1038/srep20589 ↗
21. Cycle oxidation behaviour and anti-oxidation mechanism of hot-dipped aluminium coating on TiBw/TiAl4V composites with network microstructure10.1038/s41598-018-24242-0 ↗
22. Corrosion behaviour of Al2O3 ceramics in the acid and alkaline solutions10.4028/www.scientific.net/KEM.512-515.509 ↗
23. Single-wall carbon nanotubes as attractive toughening agents in alumina-based nanocomposites10.1038/nmat793 ↗
24. Formation of a protective alumina layer after sintering for the deceleration of low temperature degradation in alumina-toughened zirconia ceramics10.1016/j.ceramint.2016.07.154 ↗
25. Sinter and hot isostatic pressing (HIP) of multi-wall carbon nanotubes (MWCNTs) reinforced ZTA nanocomposite: microstructure and fracture toughness10.1016/j.ijrmhm.2009.12.007 ↗
26. 2004 Mass spectrometric study of evaporation of alumina in the presence of carbon10.1007/s10631-005-0007-4 ↗
27. An investigation of the aluminium-oxygen-carbon system10.1139/v63-095 ↗
28. Study on complex micro surface finishing of alumina ceramic by the magnetic abrasive finishing process using alternating magnetic field10.1007/s00170-018-2064-0 ↗
29. Internal finishing process for alumina ceramic components by a magnetic field assisted finishing process10.1016/j.precisioneng.2003.07.001 ↗
30. Surface finishing of alumina ceramics by means of abrasive jet machining10.1111/j.1151-2916.2002.tb00265.x ↗
31. Jiang S. Material to prevent the low temperature degradation of zirconia. Patent No. US 7,297,420 B2, 2007, (United States).
32. Percolative mechanism of aging in zirconia-containing ceramics for medical applications10.1002/adma.200390117 ↗