Enhancement of structural & opt- electronic properties of vacuum processed Cu2ZnSnS4 thin film by thiourea treatment
Source abstract
Abstract
Abstract In the present work, Cu-Zn-Sn-S precursor films were deposited by co-evaporation using elemental precursors. Prior to sulfurization, the precursor films were divided into three sets. Set1- Cu-Zn-Sn-S precursor directly sulfurized without any pre treatment, Set 2- Cu-Zn-Sn-S precursor film with an additional SnS layer deposited by thermal evaporation & sulfurized & Set 3 Precursor Cu-Zn-Sn-S film was treated with thiourea solution before sulfurization. From combined X-ray diffraction and Raman scattering analysis, CZTS phase formation was revealed for all three sets. Set 1 & Set 2 CZTS films exhibited SnS and CuS compounds as secondary phases while the set 3 film was found to have pure kesterite phase. Highly compact and uniform films were formed for all the three CZTS sets. Compositional analysis showed that the CZTS-TU film exhibit Cu-poor and Zn rich ratios while the rest two films showed slight deviations from ideal values. By employing glancing angle XRD technique, penetration depth values were calculated at four different incident angles. Phase, crystalline nature and micro structural parameters were evaluated for CZTS films at various incident angles. Best crystalline structure, morphology, compositions was obtained for the thiourea treated CZTS film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Device characteristics of CZTSSe thin-film solar cells with 12.6% efficiency10.1002/aenm.201301465 ↗
2. Cu2ZnSnSe4 thin-film solar cells by thermal coevaporation with 11.6% efficiency and improved minority carrier diffusion length
3. Thin film solar cell with 8.4% power conversion efficiency using an earth-abundant Cu2ZnSnS4 absorber10.1002/pip.1174 ↗
4. Effects of sulfurization time and H2S concentration on electrical properties of Cu2ZnSnS4 films prepared by sol–gel method10.1016/j.materresbull.2015.08.017 ↗
5. Improvement of Cu2ZnSnS4 thin film properties by a modified sulfurization process10.1016/j.tsf.2015.05.060 ↗
6. Comparative study on the annealing types on the properties of Cu2ZnSnS4 thin films and their application to solar cells10.1016/j.apsusc.2014.09.050 ↗
7. Influence of sulfurization pressure on Cu2ZnSnS4 thin films and solar cells prepared by sulfurization of metallic precursors10.1016/j.jpowsour.2014.09.088 ↗
8. Growth of Cu2ZnSnS4 thin films by a two-stage process—effect of incorporation of sulfur at the precursor stage10.1016/j.solmat.2014.09.035 ↗
9. Improvement of Cu2ZnSnS4 thin film properties by a modified sulfurization process10.1016/j.tsf.2015.05.060 ↗
10. Growth of Cu2ZnSnS4 thin films by a two-stage process—effect of incorporation of sulfur at the precursor stage10.1016/j.solmat.2014.09.035 ↗
11. Effect of deposition temperature on the structural and electrical properties of spray deposited kesterite (Cu2ZnSnS4) films10.1016/j.solener.2015.09.027 ↗
12. Facile fabrication of Cu2ZnSnS4 thin film based on a novel metal–salt precursor printing route10.1016/j.matlet.2014.12.046 ↗
13. Improvement of Cu2ZnSn(S,Se)4 solar cell efficiency by surface treatment10.1002/pssc.201400309 ↗
14. Rapid annealing of reactively sputtered precursors for Cu2ZnSnS4 solar cells10.1002/pip.2265 ↗
15. Preparation of Cu2ZnSnS4 thin films by sulfurization of co-electroplated Cu-Zn-Sn precursors10.1002/pssc.200881182 ↗
16. Synthesis and characterisation of Copper Zinc Tin Sulphide (CZTS) compound for absorber material in solar-cells10.1016/j.jcrysgro.2011.10.034 ↗
17. Characterization of thin films by low incidence X-ray diffraction
18. Phase evolution of Cu2ZnSnS4 (CZTS) kesterite thin films during the sulfurization process10.1016/j.ceramint.2015.06.145 ↗
19. Cu2ZnSnS4 thin-films grown by dip-coating: effects of annealing10.1016/j.jallcom.2015.11.233 ↗
20. Thermally evaporated Cu2ZnSnS4 solar cells10.1063/1.3499284 ↗
21. Benign solutions and innovative sequential annealing processes for high performance Cu2ZnSn(Se,S)4 photovoltaics10.1002/aenm.201301287 ↗
22. Fabrication of Cu2ZnSnSe4 thin films by selenization of precursor using Cu2ZnSnSe4 compound for photovoltaic applications10.1002/pssc.201400279 ↗
23. Three-step process improves crystal quality of Cu2ZnSnS4 absorber layer and efficiency of solar cell10.1002/crat.201500025 ↗
24. Growth of Cu2ZnSnS4 absorber layer on flexible metallic substrates for thin film solar cell applications10.1016/j.tsf.2015.06.028 ↗
25. Fabrication and characterization of kesterite Cu2ZnSnS4 thin films deposited by electrostatic spray assisted vapour deposition method10.1002/pssa.201431374 ↗
26. An alternative route towards low-cost Cu2ZnSnS4 thin film solar cells10.1016/j.surfcoat.2013.04.052 ↗