journal article·2025-09Open access

Powder bed fused–laser beam (PBF-LB) 70/30 copper-nickel (Cu-30Ni): Hierarchical microstructure and mechanical properties

Mojtaba Roshan, MohammadBagher Mahtabi, Wiktor Bednarczyk, Marta Gajewska, Grzegorz Cios, Zaynab Mahbooba, Ankit Saharan, Meysam Haghshenas

Abstract

This study explores the mechanical and microstructural characterization of powder bed fused–laser beam 70/30 CuNi (70% copper, 30% nickel), also known as Cu-30Ni, a copper-nickel alloy recently adapted for use in additive manufacturing (AM). 70/30 CuNi is a highly suitable material for applications that demand exceptional strength and high corrosion resistance in salt water at ambient and sub-ambient temperatures. Although 70/30 CuNi is traditionally fabricated through methods such as forging and casting, its application in additive manufacturing (AM) remains in its early stages, with very limited research on powder bed fused–laser beam (PBF-LB). This study addresses such a research gap by investigating the tensile strength and microstructural evolution of PBF-LB 70/30 CuNi in ( i ) as-built and ( ii ) heat-treated states, printed at different orientations. Advanced microstructural characterization tools and quasistatic uniaxial tensile tests were employed to establish a correlation between microstructure, mechanical properties (e.g., strength, ductility, and work hardening behavior), and printing orientation (i.e., vertical versus horizontal). A multi-scale hierarchical structure consists of fine cellular structures (elongated and equiaxed) within the coarse grains were identified in nano-, micro-, and macro-levels. It was observed that the horizontally built material demonstrates higher yield stress and ultimate tensile strength, but lower ductility compared to those printed in the vertical direction. We also compared our tensile results against the mechanical properties of commercial (i.e., cast) 70/30 CuNi. This study provides valuable insights into the potential of PBF-LB 70/30 CuNi as an alternative for conventionally fabricated counter material, for various industrial applications (e.g., marine).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Low initial lubrication procedure in the machining of copper-nickel 70/30 ASTM B122 alloy10.1016/j.jmapro.2021.01.002 ↗
2. Recent researches on Cu-Ni alloy matrix composites through electrodeposition and powder metallurgy methods: a review10.1016/j.matpr.2021.07.145 ↗
3. Heat treatment effects on the microstructural and mechanical properties of electrodeposited Cu-Ni coatings
4. Influence of solution-hardening on the mechanical properties and wear resistance of copper alloys10.1016/j.wear.2023.204869 ↗
5. ASTM B369-09 · 2016
6. Current trends in electron beam and laser powder bed fusion additive manufacturing of copper alloys: composition, defects, properties, and challenges10.1016/j.matdes.2025.113742 ↗
7. Advancements in additive manufacturing for copper-based alloys and composites: a comprehensive review
8. A review on fatigue characteristics of Nickel-Aluminum bronze (NAB): conventionally fabricated and additively manufactured10.1111/ffe.14499 ↗
9. Temperature-Dependent material property database of cast 70/30 Cu-Ni material
10. Mechanical properties of undercooled Cu70Ni30 alloy10.1023/A:1004805029230 ↗
11. Effect of thickness reduction on microstructure and properties of rolled C71500 cupronickel alloy tube10.1007/s11665-021-05667-7 ↗
12. Effect of heat treatment on the highly corrosion-resistant Cu70Ni27. 7Fe2. 3 alloy10.1016/j.jallcom.2010.06.148 ↗
13. Cavitation erosion characterization of Cu-Ni alloy laser cladding layer under the action of high-pressure water jet10.1016/j.jallcom.2025.179325 ↗
14. Dynamic recovery and recrystallization behaviors of C71500 copper-nickel alloy under hot deformation10.1007/s11665-020-05221-x ↗
15. Corrosion behavior of high-strength C71500 copper-nickel alloy in simulated seawater with high concentration of sulfide10.3390/ma15238513 ↗
16. Characterization of copper–nickel alloys fabricated using laser metal deposition and blended powder feedstocks10.1007/s00170-019-03553-0 ↗
17. Full-composition-gradient in-situ alloying of Cu–Ni through laser powder bed fusion
18. Material properties of gradient copper-nickel alloy fabricated by wire arc additive manufacturing based on bypass-current PAW10.1016/j.jmapro.2022.09.037 ↗
19. V.R. Baraz, S.S. Gerasimov, I.A. Gruzdeva, V.P. Shveikin, A.V. Chemesova, A.O. Ovchinnikova, I.A. Veretennikova, The additive technology to obtain a three-dimensional model of the 81Cu-19Ni alloy, IOP Conf. Ser.: Mater. Sci. Eng. 966 012119.10.1088/1757-899X/966/1/012119 ↗
20. Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder10.1007/s00170-018-1891-3 ↗
21. Microstructure, mechanical and corrosion properties of Copper-Nickel 90/10 alloy producead by CMT-WAAM method10.3390/ma17010050 ↗
22. The first layer: Single-Track insights into direct energy deposition processed Cu-Ni thermoelectric alloys
23. Microstructural evolution and mechanical, and corrosion property evaluation of Cu–30Ni alloy formed by direct metal deposition process10.1016/j.jallcom.2011.03.091 ↗
24. Microstructure, mechanical, and corrosion resistance of copper nickel alloy fabricated by wire-arc additive manufacturing10.1557/s43579-021-00120-1 ↗
25. Microstructures and corrosion properties of wire arc additive manufactured Copper–Nickel alloys10.3390/ma17040876 ↗
26. Corrosion evaluation and microstructural characteristics of 70/30 Copper-Nickel alloy fabricated by laser powder bed fusion10.1016/j.jalmes.2025.100155 ↗
27. Investigation on mechanical properties and corrosion behavior of laser powder bed fusion 70/30 copper-nickel alloy10.1016/j.corsci.2024.112040 ↗
28. Tailoring the microstructure and mechanical properties for additive manufactured CuNi30 alloy via in-situ NbC formation10.1016/j.matlet.2025.138714 ↗
29. ASTM, E08/E8M-22, Standard test methods for tension testing of metallic materials-designation, 2022.
30. Analysis tools for electron and X-ray diffraction
31. Phase-field simulation of solidification morphology in laser powder deposition of Ti–Nb alloys10.1016/j.actamat.2011.12.009 ↗
32. Microstructural and mechanical evaluation of post-processed SS 316L manufactured by laser-based powder bed fusion10.1016/j.jmrt.2021.02.090 ↗
33. Review on corrosion performance of laser powder-bed fusion printed 316L stainless steel: effect of processing parameters, manufacturing defects, post-processing, feedstock, and microstructure10.1016/j.matdes.2022.110874 ↗
34. Use of recalescence behavior analysis for the prediction of grain refinement in undercooled Cu–Ni alloy10.1007/s10853-010-5189-6 ↗
35. Formation mechanism of heterogeneous microstructures and shape memory effect in NiTi shape memory alloy fabricated via laser powder bed fusion10.1016/j.matdes.2023.112107 ↗
36. Effects of the crystallographic and spatial orientation of α lamellae on the anisotropic in-situ tensile behaviors of additive manufactured Ti–6Al–4V10.1016/j.jallcom.2020.156886 ↗
37. Development of crystallographic misorientation in laser powder bed fusion 316L stainless steel
38. A comprehensive review on laser powder bed fusion of steels: processing, microstructure, defects and control methods, mechanical properties, current challenges and future trends10.1016/j.jmapro.2021.12.033 ↗
39. Microstructure, solidification texture, and thermal stability of 316L stainless steel manufactured by laser powder bed fusion10.3390/met8080643 ↗
40. A. Klassert, L. Tikana, Copper and copper–nickel alloys–an overview, Corrosion behaviour and protection of copper and aluminium alloys in seawater, European Federation of Corrosion (EFC) Series (2007) 47-61.10.1533/9781845693084.2.47 ↗
41. Investigation of effects of process parameters on microstructure and hardness of SLM manufactured SS316L10.1016/j.jallcom.2018.01.098 ↗
42. The effect of processing parameters on dislocation density and tensile properties in laser powder bed fusion 316L10.1088/1757-899X/1310/1/012024 ↗
43. Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting10.1016/j.matchar.2019.110074 ↗
44. Heterogeneous aspects of additive manufactured metallic parts: a review10.1007/s12540-020-00931-2 ↗
45. Investigation on evolution mechanisms of site-specific grain structures during metal additive manufacturing10.1016/j.jmatprotec.2018.02.042 ↗
46. Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing10.1016/j.actamat.2014.12.054 ↗
47. The anisotropic grain size effect on the mechanical response of polycrystals: the role of columnar grain morphology in additively manufactured metals10.1016/j.jmst.2023.10.010 ↗
48. Influence of position and building orientation on the static properties of LPBF specimens in 17-4 PH stainless steel10.1016/j.finmec.2022.100108 ↗
49. Effect of build orientation on anisotropy in tensile behavior of laser powder bed fusion fabricated SS316L10.1007/s11665-023-08490-4 ↗
50. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion10.1016/j.actamat.2020.11.018 ↗
51. Mechanical behaviours of the hierarchical microstructure of PBF-LB/M 316L SS during high cycle fatigue10.1016/j.msea.2024.147652 ↗
52. Micromechanisms of deformation and fracture in porous l-PBF 316L stainless steel at different strain rates10.3390/met11111870 ↗