Microstructure, strength and corrosion resistance in an Al-Zn-Mg-Cu alloy after artificial aging and subsequent long-term natural aging
Source abstract
Abstract
Natural aging after artificial aging is inevitable in the long-term service of Al-Zn-Mg-Cu alloy. However, the mechanism of microstructural evolution and its effect on the properties remains largely unexplored. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and energy dispersive X-ray spectroscopy (EDS) were employed to analyze the precipitation behavior, especially at the grain boundary, and the impact on the properties of the alloy after long-term natural aging. After natural aging, the precipitate free zone (PFZ) widens substantially, and a new Zn-rich grain boundary phase with MgZn 3 structure is observed. The phase increases the hardness in conjunction with other grain boundary precipitation phases, which promotes grain boundary strengthening and subsequently enhances the mechanical properties of the alloy. In addition, the formation of Zn-rich grain boundary phase creates multiple electrochemical microcouples with other phases, the widened PFZ and the Al matrix, which increase electrochemical activity and consequently affect the corrosion properties. These results reveal the grain boundary precipitation behavior and the influence mechanism on the properties, providing valuable insights for the development of high-strength and corrosion-resistant alloys.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Recent development in aluminium alloys for the automotive industry10.1016/S0921-5093(99)00653-X ↗
2. Training high-strength aluminum alloys to withstand fatigue10.1038/s41467-020-19071-7 ↗
3. Recent advances in ageing of 7xxx series aluminum alloys: a physical metallurgy perspective10.1016/j.jallcom.2018.11.286 ↗
4. Natural and artificial ageing in aluminium alloys-the role of excess vacancies10.1016/j.actamat.2021.117014 ↗
5. Annealing of aluminium and its alloys
6. Modelling of grain boundary segregation, precipitation and precipitate-free zones of high strength aluminium alloys-II. Application of the models10.1016/1359-6454(95)00317-7 ↗
7. Grain boundary segregation and precipitation in aluminium alloys10.1016/S1359-6462(00)00577-7 ↗
8. Zur Frage der Kalt- und Warmaushärtung bei Aluminium-Magnesium-Silizium-Legierungen
9. Beitrag zur Frage der Kalt- und Warmaushärtung auf Grund thermoelektrischer Untersuchungen
10. A resistometric study of preprecipitation in an aluminium-1.4% Mg2Si alloy
11. The mechanism of clustering in supersaturated solid solutions of Al-Mg2Si Alloys10.1016/0001-6160(72)90092-2 ↗
12. The interaction of natural ageing with straining in a twin-roll cast AlMgSi automotive sheet10.1016/j.scriptamat.2006.06.009 ↗
13. Mechanism of localized corrosion of 7075 alloy plate10.1007/BF02648553 ↗
14. Plain interface strategy toward the high corrosion performance of Al matrix composites10.1007/s40843-023-2663-8 ↗
15. The influence of natural aging on the precipitation behavior of the low-alloy content Al-Zn-Mg aluminum alloys during subsequent artificial aging and related mechanisms10.1016/j.msea.2023.145954 ↗
16. In situ transmission electron microscopy investigation of nucleation of GP zones under natural aging in Al-Zn-Mg alloy10.1016/j.scriptamat.2021.114319 ↗
17. Natural-ageing-enhanced precipitation near grain boundaries in high-strength aluminum alloy10.1016/j.jmst.2019.11.035 ↗
18. Formation of solute nanostructures in an Al-Zn-Mg alloy during long-term natural aging10.1016/j.jallcom.2019.153572 ↗
19. On the natural aging behaviorof Aluminum 6061 alloy after severe plastic deformation10.1016/j.msea.2013.05.051 ↗
20. In situ evaluation of dynamic precipitation during plastic straining of an Al-Zn-Mg-Cu alloy10.1016/j.actamat.2012.01.002 ↗
21. Plastic flow properties and microstructural evolution in an ultrafine-grained Al-Mg-Si alloy at elevated temperatures10.1007/s11661-009-0036-6 ↗
22. The formation of nanograin structures and accelerated room-temperature theta precipitation in a severely deformed Al-4wt% Cu alloy10.1016/j.actamat.2009.11.008 ↗
23. Influence of the tool pin and shoulder on microstructure and natural aging kinetics in a friction-stir-processed 6061–T6 aluminum alloy10.1007/s11661-006-9034-0 ↗
24. In situ evaluation of dynamic precipitation during plastic straining of an Al-Zn-Mg-Cu alloy10.1016/j.actamat.2009.11.008 ↗
25. Effects of long-term natural aging on the altered surface layer on an Al-Zn-Mg-Cu alloy and on corrosion properties10.1016/j.electacta.2018.02.001 ↗
26. Accelerated precipitation and growth of phases in an Al-Zn-Mg-Cu alloy processed by surface abrasion10.1016/j.actamat.2017.03.074 ↗
27. Effect of post-weld natural aging on mechanical and microstructural properties of friction stir welded 6063-T4 aluminium alloy10.1016/j.matdes.2014.08.037 ↗
28. Simultaneous improvement in strength and ductility in 7xxx Al through a combination of natural aging and deformation10.1016/j.msea.2023.145566 ↗
29. Precision forging technology for aluminum alloy10.1007/s11465-018-0477-y ↗
30. Comparison of long-term natural aging to artificial aging in Duralumin10.1051/matecconf/202032604007 ↗
31. Structural studies of stacking variants in Mg-base FriaufeLaves phases10.1107/S0567740880006565 ↗
32. Effect of compositions on the quenching sensitivity of 7050 and 7085 alloys10.1016/j.msea.2016.04.095 ↗
33. The rapid age strengthening induced by Ag additions in 7075 aluminum alloy10.1016/j.msea.2015.09.044 ↗
34. Characterization and modeling of precipitation kinetics in an Al-Zn-Mg alloy10.1016/S0921-5093(00)01247-8 ↗
35. An electron microscope investigation of the microstructure in an aluminium-zinc-magnesium alloy10.1016/0001-6160(70)90016-7 ↗
36. Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation10.1016/S0921-5093(03)00624-5 ↗
37. Evolution of precipitate and precipitate/matrix interface in Al-Zn-Mg-Cu (-Ag) alloys10.1016/j.jmst.2022.07.049 ↗
38. Strain-rate and temperature dependent optimum precipitation sizes for strengthening in medium-entropy alloys10.1016/j.ijplas.2025.104268 ↗
39. Electrochemical characteristics of intermetallic phases in aluminum alloys10.1149/1.1869984 ↗