journal article·2025-06

Strategies for enhancing the stability and performance of nickel-based catalysts in solid oxide fuel cells: A review

Nur Syafiqah Alisa Mohd Nizam, Nur Syafa Qahiera Abdul Halim, Wan Nor Anasuhah Wan Yusoff, Nurul Akidah Baharuddin, Rozan Mohamad Yunus, Mahendra Rao Somalu

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Catalytic Processes in Materials Science · Fuel Cells and Related Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (96)

Show source-provided references
1. On the technology of solid oxide fuel cell (SOFC) energy systems for stationary power generation: a review
2. A review on the preparation of anode materials and anode films for solid oxide fuel cell applications10.1002/er.6763 ↗
3. Microstructure and long-Term stability of Ni-YSZ anode supported fuel cells: a review
4. A review of degradation mechanisms and recent achievements for Ni-Rich cathode-based Li-Ion batteries10.1002/aenm.202103005 ↗
5. A review on the process-structure-performance of lanthanum strontium cobalt ferrite oxide for solid oxide fuel cells cathodes
6. Carbonate-superstructured solid fuel cells with hydrocarbon fuels10.1073/pnas.2208750119 ↗
7. Engineered defects in cerium oxides: tuning chemical reactivity for biomedical, environmental, & energy applications10.1039/D0NR01203C ↗
8. Research progress and reaction mechanism of CO2 methanation over Ni-based catalysts at low temperature: a review10.3390/catal12020244 ↗
9. Recent progress in design and fabrication of SOFC cathodes for efficient catalytic oxygen reduction10.1016/j.cattod.2022.05.008 ↗
10. Solvent-free microwave synthesis of ultra-small Ru-Mo2C@CNT with strong metal-support interaction for industrial hydrogen evolution
11. Nickel-regulated composite cathode with balanced triple conductivity for proton-conducting solid oxide fuel cells10.1002/advs.202304555 ↗
12. Nanomaterial by sol-gel method: synthesis and application10.1155/2021/5102014 ↗
13. Wet chemical synthesis of anode reforming layer in solid oxide fuel cell: a comprehensive review of sol-gel, co-precipitation and combustion synthesis
14. Application of atomic layer deposition in fabricating high-efficiency electrocatalysts10.1016/S1872-2067(19)63440-6 ↗
15. Microwave-assisted preparation of luminescent inorganic materials: a fast route to light conversion and storage phosphors10.3390/molecules26102882 ↗
16. Manipulating Nb-doped SrFeO3−δ with excellent performance for proton-conducting solid oxide fuel cells10.26599/JAC.2024.9220880 ↗
17. Hydrothermal synthesis of ZnO superstructures with controlled morphology via temperature and pH optimization
18. Active and stable plasma-enhanced ALD Pt@Ni-YSZ hydrogen electrode for steam reversible solid oxide cells
19. A comparative study on citrate sol-gel and combustion synthesis methods of CoAl2O4 spinel10.1111/ijac.13598 ↗
20. Co-precipitation synthesis of stable iron oxide nanoparticles with NaOH: new insights and continuous production via flow chemistry
21. Atomic layer deposition of thin films: from a chemistry perspective10.1088/2631-7990/acd88e ↗
22. Mechanochemical kilogram-scale synthesis of noble metal single-atom catalysts
23. Stabilizing supported Ni catalysts for dry reforming of methane by combined la doping and Al overcoating using atomic layer deposition10.1021/acscatal.2c02599 ↗
24. Carbon deposition properties of Ni0.5M0.5/10Sc1CeSZ (M = Cu, Co and Fe) cermet anode for dry reforming methane-fuelled solid oxide fuel cells10.1088/1755-1315/268/1/012138 ↗
25. Rapid construction of nickel phyllosilicate with ultrathin layers and high performance for CO2 methanation10.1016/j.jcis.2024.04.179 ↗
26. Characterization of sol-gel prepared silica supported NiO-CuO composites
27. Investigating the structural, electrochemical, and optical properties of p-type spherical nickel oxide (NiO) nanoparticles
28. Enhancing activity, charge transport, power production, and stability of commercial solid oxide fuel cells with yttria-stabilized zirconia nanoparticles10.1149/1945-7111/ab6eed ↗
29. Cobalt oxide enhanced lanthanum strontium cobalt ferrite electrode for solid oxide fuel cells10.3233/MGC-210114 ↗
30. A. Al-Yunus et al., Effect of Synthesis Conditions on CuO-NiO Nanocomposites Synthesized via Saponin-Green / Microwave Assisted-Hydrothermal Method, 2024.10.3390/nano14030308 ↗
31. Synthesis and characterization of NiO colloidal ink solution for printing components of solid oxide fuel cells anodes10.1016/j.ceramint.2020.06.318 ↗
32. Unraveling particle size and roughness effects on the interfacial catalytic properties of pickering emulsions10.1016/j.colsurfa.2020.124800 ↗
33. Numerical analysis of the relation between the porosity of the fuel electrode support and functional layer, and performance of solid oxide fuel cells using computational fluid dynamics10.1016/j.ijhydene.2023.06.166 ↗
34. Structural insight into an atomic layer deposition (ALD) grown Al2O3layer on Ni/SiO2: Impact on catalytic activity and stability in dry reforming of methane10.1039/D1CY01149A ↗
35. A universal multifunctional rare earth oxide coating strategy to stabilize high-nickel lithium layered oxide cathode
36. Promoting effect of Ce doping on catalytic performance and water resistance ability for toluene catalytic combustion over the cheap and efficient Mn8Ni2CeaOx catalysts
37. Effects of metal oxides on carbonation and coking of high-salinity organic wastewater10.1155/2020/6667497 ↗
38. Recent advances in the mitigation of the catalyst deactivation of co2 hydrogenation to light olefins10.3390/catal11121447 ↗
39. Ni/Ce0.9Eu0.1O1.95 with enhanced coke resistance for dry reforming of methane10.1016/j.jcat.2022.01.020 ↗
40. Dry reforming of methane on NiCu and NiPd model systems: optimization of carbon chemistry10.3390/catal12030311 ↗
41. Anodes for sofc: review of material selection, interface and electrochemical phenomena
42. Functional catalytic membrane development: a review of catalyst coating techniques10.1016/j.cis.2020.102207 ↗
43. Sinter-resistant nickel catalyst for lignin hydrogenolysis achieved by liquid phase atomic layer deposition of alumina10.1002/aenm.202203377 ↗
44. Advances in microwave synthesis of nanoporous materials10.1002/adma.202103477 ↗
45. Plant-based extracts as reducing, capping, and stabilizing agents for the green synthesis of inorganic nanoparticles10.3390/resources13060070 ↗
46. Air-assisted transient synthesis of metastable nickel oxide boosting alkaline fuel oxidation reaction
47. Chemical looping combustion with nanosize oxygen carrier: a review10.1007/s13762-020-02840-8 ↗
48. Review on porosity control in nanostructured semiconducting metal oxides and its influence on chemiresistive gas sensing10.1021/acsanm.2c04447 ↗
49. Sol-gel synthesized nickel oxide nanostructures on nickel foam and nickel mesh for a targeted energy storage application
50. Formation of a ceramic structure of promoted iron oxide catalyst10.52957/2782-1900-2024-4-3-8-16 ↗
51. Overcoming the trade-off between water permeation and mechanical strength of ceramic membrane supports by interfacial engineering10.1021/acsami.1c08157 ↗
52. A cobalt-free multi-phase nanocomposite as near-ideal cathode of intermediate-temperature solid oxide fuel cells developed by smart self-assembly10.1002/adma.201906979 ↗
53. Evolution of heterogeneity in industrial selective oxidation catalyst pellets10.1021/acscatal.1c01744 ↗
54. Review on recent advancement in cathode material for lower and intermediate temperature solid oxide fuel cells application10.1016/j.ijhydene.2021.10.094 ↗
55. Insight into the role of CaO in coke-resistant over Ni-HMS catalysts for CO2 reforming of methane
56. Sol–gel synthesis of Ni/Al2O3 catalysts for toluene reforming: support modification with alkali, alkaline earth or rare-earth dopant (Ca, K, Mg or Ce)
57. Synthesis methods for nanoparticle morphology control in energy applications
58. Cutting-edge advances in tailoring size, shape, and functionality of nanoparticles and nanostructures: a review
59. Mitigating anode/electrolyte interfacial Ni diffusion by a microwave sintering method for proton-conducing solid oxide fuel cells
60. Catalytic layer-membrane electrode assembly methods for optimum triple phase boundaries and fuel cell performances10.1039/D0TA07470E ↗
61. The relation of microstructure, materials properties and impedance of SOFC electrodes: a case study of Ni/GDC anodes10.3390/en13040987 ↗
62. Detailed electrochemical performance and microstructural characterization of nickel – Yttria stabilized zirconia cermet anodes infiltrated with nickel, gadolinium doped ceria, and nickel – Gadolinium doped ceria nanoparticles
63. Ni-doped Fe-based perovskite to obtain multifunctional and highly efficient electrocatalytic active IT-SOFC electrode
64. Fast solution synthesis of NiO-Gd0.1Ce0.9O1.95 nanocomposite via different approach: influence of processing parameters and characterizations10.3390/ma14123437 ↗
65. Research on the novel spinel structure of Cu0.5Ni0.5MnCoO4 and its application in solid oxide fuel cells10.1016/j.ceramint.2024.05.076 ↗
66. High performance of direct methane-fuelled solid oxide fuel cell with samarium modified nickel-based anode10.1016/j.ijhydene.2020.07.070 ↗
67. Ni agglomeration and performance degradation of solid oxide fuel cell: a model-based quantitative study and microstructure optimization
68. Enhanced methane electrooxidation by ceria and nickel oxide impregnated perovskite anodes in solid oxide fuel cells10.1016/j.ijhydene.2020.02.040 ↗
69. Improved redox cycling durability in alternative Ni alloy-based SOFC anodes10.1149/1945-7111/abac87 ↗
70. Understanding the impact of sintering temperature on the properties of Ni–BCZY composite anode for protonic ceramic fuel cell application10.3390/pr11071902 ↗
71. Influence of sintering temperature on the structural, morphological, and electrochemical properties of NiO-YSZ anode synthesized by the autocombustion route10.3390/met12020219 ↗
72. The effects of sintering temperature and current contacting layer on the performance of lanthanum nickelate electrodes in solid oxide fuel cells
73. Nickel-doped BaCo0.4Fe0.4Zr0.1Y0.1O3-δ as a new high-performance cathode for both oxygen-ion and proton conducting fuel cells10.1016/j.cej.2020.127717 ↗
74. Recent advances and challenges in thin-film fabrication techniques for low-temperature solid oxide fuel cells10.3390/cryst13071008 ↗
75. A review on solid oxide fuel cell stack designs for intermediate temperatures10.17576/jkukm-2020-32(1)-18 ↗
76. Synthesis of Co–Ni and Cu–Ni based-catalysts for dry reforming of methane as potential components for SOFC anodes10.1016/j.ceramint.2021.08.220 ↗
77. Understanding the coarsening and degradation in a nanoscale nickel gadolinia-doped-ceria electrode for high-temperature applications10.1021/acsami.0c13784 ↗
78. Development of Ni-based alloy catalysts to improve the sulfur poisoning resistance of Ni/YSZ anodes in SOFCs10.1039/D0CY00815J ↗
79. Tuning the microstructure and thickness of ceramic layers with advanced coating technologies using zirconia as an example10.1002/adem.202000529 ↗
80. Multiscale analysis of Ni-YSZ and Ni-CGO anode based SOFC degradation: From local microstructural variation to cell electrochemical performance
81. Review of factors affecting the performance degradation of Ni-YSZ fuel electrodes in solid oxide electrolyzer cells
82. A mini review of the recent progress of electrode materials for low-temperature solid oxide fuel cells10.1039/D2CP05133H ↗
83. A comprehensive review of thermal management in solid oxide fuel cells: focus on burners, heat exchangers, and strategies10.3390/en17051005 ↗
84. Overview on ceramic and nanostructured materials for solid oxide fuel cells (Sofcs) working at different temperatures10.33961/jecst.2019.00612 ↗
85. Advancements in composite cathodes for intermediate-temperature solid oxide fuel cells: a comprehensive review10.1016/j.ijhydene.2024.02.124 ↗
86. Effect of calcination temperature on the structure and performance of rod-like MnCeOx derived from MOFs catalysts
87. Ultra-durable Ni-Ir/MgAl2O4 catalysts for dry reforming of methane enabled by dynamic balance between carbon deposition and elimination
88. Low-temperature catalytic oxidation of benzene over nanocrystalline Cu-Mn composite oxides by facile sol-gel synthesis10.1039/C9NJ05097C ↗
89. Sol-Gel materials for electrochemical applications: recent advances10.3390/coatings12111625 ↗
90. Hydrothermal synthesis of ZnO nanostructures with controllable morphology change10.1039/C9CE01556F ↗
91. Surface modification and functionalization of powder materials by atomic layer deposition: a review10.1039/D1RA00326G ↗
92. Electrochimica Acta Understanding the effect of porosity and pore size distribution on low loading catalyst layers10.1016/j.electacta.2022.140410 ↗
93. Multiscale structured low-temperature solid oxide
94. Enhancing the partial oxidation of gasoline with Mo-doped Ni catalysts for SOFC applications: an integrated experimental and DFT study
95. Optimization analysis of solid oxide fuel cells with ceria-based single cells using computational fluid dynamics
96. Enhancing CO2 methanation over Ni catalysts supported on sol-gel derived Pr2O3-CeO2: An experimental and theoretical investigation10.1016/j.apcatb.2022.121836 ↗