journal article·2025-03Open access

Deformation, mechanical properties, and fracture of titanium hydrides

Saiedeh Marashi, Hamidreza Abdolvand

Abstract

This study investigates the deformation behavior and cracking mechanisms in titanium δ-hydrides through in-situ scanning electron microscopy (SEM) and in-situ electron backscatter diffraction (EBSD) tensile experiments. Two commercially pure titanium specimens were hydrided and then homogenized to have both intergranular and intragranular δ-hydrides, before being deformed to ∼14 % macroscopic tensile strain . Pre-deformation grain orientations and shapes were measured by EBSD and subsequently imported into a crystal plasticity finite element model to simulate the evolution of localized deformation fields and the formation of microcracks within hydrides. In addition, indentation experiments were performed to extract plastic properties of hydrides. Pre-deformation numerical and experimental results indicated that the formation of δ-hydrides, in the absence of external mechanical loads, induces lattice rotations up to 2° near hydride tips as well as at the intersection of intergranular and intragranular hydrides. With applying external mechanical loads, ̅ ̅ ̅ { 11 2 ̅ 2 } < 11 2 ̅ 3 ̅ > compression twins form in the titanium matrix, followed by the formation of secondary ̅ ̅ ̅ { 10 1 ̅ 2 } < 10 1 ̅ 1 ̅ > extension twins within compression twins. The interaction of hydrides with compression twins increase local rotations within hydrides up to 6°. Microcracks were detected in both intragranular and intergranular δ-hydrides, with a higher propensity measured within the former. These microcracks were observed to form at the intersections of compression twins and hydrides, on the crystallographic planes of hydrides. Numerical results confirm that the presence of twins affect the formation of microcracks.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Hydrides precipitation in Ti6Al4V titanium alloy used for airframe manufacturing
2. Surface concentration and microscale distribution of hydrogen and the associated embrittlement in a near α titanium alloy10.1016/j.jallcom.2021.158669 ↗
3. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
4. Hydrogen in Ti and Zr alloys: industrial perspective, failure modes and mechanistic understanding10.1098/rsta.2016.0418 ↗
5. Effect of hydrogen precharging on mechanical and electrochemical properties of pure titanium10.1002/adem.201901182 ↗
6. Hydriding of titanium: recent trends and perspectives in advanced characterization and multiscale modeling10.1016/j.cossms.2022.101020 ↗
7. In-situ scanning electron microscope thermal desorption spectroscopy (SEM-TDS) analysis of thermally-induced titanium hydride decomposition and reformation10.1016/j.actamat.2021.117562 ↗
8. Characterisation of hydride formation in as-built and heat treated laser powder bed fused Ti-6Al-4V10.1016/j.jallcom.2023.172859 ↗
9. The formation of hydride and its influence on Ti–6Al–4V alloy fracture behavior10.1016/j.ijhydene.2023.05.226 ↗
10. Hydrogenation-induced lattice expansion and its effects on hydrogen diffusion and damage in Ti–6Al–4V10.1016/j.actamat.2020.02.029 ↗
11. Solute hydrogen and hydride phase implications on the plasticity of zirconium and titanium alloys: a review and some recent advances10.1098/rsta.2016.0417 ↗
12. Deformation induced FCC lamellae and their interaction in commercial pure Ti10.1016/j.scriptamat.2018.11.037 ↗
13. A fast method for determining favourable orientation relationships and interface planes: Application to titanium-titanium hydrides transformations10.1016/j.actamat.2006.06.061 ↗
14. A. Bos, S. Naka, IN-SITU HIGH RESOLUTION OBSERVATION OF HYDRIDE PRECIPITATION IN TITANIUM, 1986.
15. Determination of orientation relationships between FCC-hydride and HCP-titanium and their correlation with hydrides distribution10.1016/j.jallcom.2019.153297 ↗
16. Q. Wang, Crystallographic analysis of hydride phase transformation and its effect on mechanical property of commercial pure titanium, Université de Lorraine, 2021. 〈http://www.culture.gouv.fr/culture/infos-pratiques/droits/protection.htm〉.
17. Mechanical properties of titanium hydride10.1016/j.jallcom.2006.06.107 ↗
18. Hydrogen concentration and hydrides in Zircaloy-4 during cyclic thermomechanical loading10.1016/j.actamat.2021.117368 ↗
19. A review on hydride precipitation in zirconium alloys10.1016/j.jnucmat.2015.07.014 ↗
20. Dislocations generated by zirconium hydride precipitates in zirconium and some of its alloys10.1016/0022-3115(73)90023-8 ↗
21. Hydrogen in zirconium alloys: A review10.1016/j.jnucmat.2019.02.042 ↗
22. On the effects of transformation strain induced by hydride precipitation10.1016/j.actamat.2023.119356 ↗
23. The micromechanics of fracture of zirconium hydrides10.1016/j.actamat.2024.120143 ↗
24. Multi-dimensional morphology of hydride diffusion layer and associated sequential twinning in commercial pure titanium10.1016/j.jmst.2021.07.010 ↗
25. Secondary twin variant selection in four types of double twins in titanium10.1016/j.actamat.2018.03.068 ↗
26. Near-α titanium alloy dwell load-induced deformation twinning to coordinate the deformation mechanism associated with crack initiation10.1016/j.ijplas.2024.104116 ↗
27. Interaction of {112¯2} twin variants in hexagonal close-packed titanium10.1016/j.jmst.2018.09.049 ↗
28. Interactions between hydrogen and the (112¯1) twin boundary in hexagonal close-packed titanium10.1016/j.ijhydene.2020.01.143 ↗
29. In-situ synchrotron-based high energy X-ray diffraction study of the deformation mechanism of δ-hydrides in a commercially pure titanium10.1016/j.scriptamat.2022.114608 ↗
30. Nanoindentation study of hydride diffusion layer in commercial pure titanium10.1016/j.msea.2021.142428 ↗
31. Repair of embrittlement induced by different hydride configurations by dissolving partial hydrides using pulsed electric current10.1016/j.ijhydene.2023.07.120 ↗
32. First-principles investigation of the structure and thermodynamic properties of titanium hydrides10.1016/j.commatsci.2024.112851 ↗
33. First principles characterisation of brittle transgranular fracture of titanium hydrides10.1016/j.actamat.2016.07.037 ↗
34. Multiscale evaluation of hydrogen-assisted mechanical degradation in grade 2 titanium10.1016/j.jallcom.2024.173959 ↗
35. Degradation of metal hydrides in hydrogen-based thermodynamic machines: A review10.1016/j.ijhydene.2024.03.228 ↗
36. H. Numakura, M. Koiwa, HYDRIDE PRECIPITATION IN TITANIUM, 1984.10.1016/0001-6160(84)90236-0 ↗
37. An investigation on structure, deformation and fracture of hydrides in titanium with a large range of hydrogen contents10.1016/j.actamat.2004.04.024 ↗
38. Hydrogen enhanced localised plasticity of single grain α titanium verified by in-situ hydrogen microcantilever bending
39. Process and properties of hydride formed on gamma titanium aluminide during cathodic charging10.1016/j.jallcom.2005.03.046 ↗
40. Diffusion and redistribution of hydrogen atoms in the vicinity of localized deformation zones10.1016/j.mechmat.2022.104544 ↗
41. The interactions of deformation twins, zirconium hydrides, and microcracks10.1016/j.ijplas.2024.104149 ↗
42. Modelling the interactions of zirconium hydrides
43. Crystal plasticity based study to understand the interaction of hydrogen, defects and loading in austenitic stainless-steel single crystals10.1016/j.ijhydene.2020.08.181 ↗
44. Coupled crystal plasticity finite element-phase field model with kinetics-controlled twinning mechanism for hexagonal metals10.1016/j.actamat.2020.11.002 ↗
45. The asymmetric evolution of grain-scale stresses in notched specimens under cyclic loads10.1016/j.actamat.2023.119567 ↗
46. In-situ high-energy X-ray diffraction and crystal plasticity modeling to predict the evolution of texture, twinning, lattice strains and strength during loading and reloading of beryllium10.1016/j.ijplas.2022.103217 ↗
47. Formation and annihilation of stressed deformation twins in magnesium10.1038/s43246-020-00105-y ↗
48. Residual stress measurement of laser powder bed fusion additively manufactured hastelloy-x through crystal plasticity simulations and neutron diffraction experiments10.1007/s11661-024-07474-w ↗
49. Deformation mechanisms of additively manufactured Hastelloy-X: a neutron diffraction experiment and crystal plasticity finite element modeling10.1016/j.matdes.2022.111030 ↗
50. Growth of {112¯2} twins in titanium: a combined experimental and modelling investigation of the local state of deformation10.1016/j.actamat.2016.12.066 ↗
51. Nucleation and growth of {11[Formula presented]2} twins in titanium: Elastic energy and stress fields at the vicinity of twins
52. Numerical prediction of {112‾2}〈112‾3‾〉 compression twin activation in commercially pure titanium under uniaxial tension10.1016/j.msea.2022.143302 ↗
53. Unraveling size-affected plastic heterogeneity and asymmetry during micro-scaled deformation of CP-Ti by non-local crystal plasticity modeling10.1016/j.ijplas.2023.103733 ↗
54. Nanoindentation study of δ-phase zirconium hydride using the crystal plasticity model10.1016/j.ijplas.2023.103675 ↗
55. Microstructural fracture mechanics: stored energy density at fatigue cracks10.1016/j.jmps.2020.104209 ↗
56. Development of microstructure-sensitive damage models for zirconium polycrystals10.1016/j.ijplas.2021.103156 ↗
57. Hierarchical microstructure based crystal plasticity-continuum damage mechanics approach: model development and validation of rolling contact fatigue behavior10.1016/j.ijplas.2021.103025 ↗
58. Asymmetrical plastic deformation during spherical micro-indentation of magnesium10.1016/j.matchar.2024.114355 ↗
59. Multi-scale modeling and experimental study of twin inception and propagation in hexagonal close-packed materials using a crystal plasticity finite element approach - part I: average behavior10.1016/j.jmps.2012.10.013 ↗
60. Numerical study of the stress state of a deformation twin in magnesium10.1016/j.actamat.2014.10.048 ↗
61. Deformation induced FCC lamellae and their interaction in commercial pure Ti10.1016/j.scriptamat.2018.11.037 ↗
62. Crystallographic orientation dependence of hydride precipitation in commercial pure titanium10.1016/j.actamat.2019.11.027 ↗
63. On the effects of reorientation and shear transfer during twin formation: comparison between high resolution electron backscatter diffraction experiments and a crystal plasticity finite element model10.1016/j.ijplas.2016.05.006 ↗
64. A study of the stress state associated with twin nucleation and propagation in anisotropic materials10.1080/01418619308207151 ↗
65. Resolving the geometrically necessary dislocation content by conventional electron backscattering diffraction10.1016/j.scriptamat.2008.01.050 ↗
66. A non-local crystal plasticity constitutive model for hexagonal close-packed polycrystals10.1016/j.ijplas.2020.102883 ↗
67. Strain-gradient crystal plasticity finite element modeling of slip band formation in α-zirconium10.3390/cryst11111382 ↗
68. A non-local methodology for geometrically necessary dislocations and application to crack tips10.1016/j.ijplas.2021.102970 ↗
69. Texture analysis with MTEX- Free and open source software toolbox
70. Some geometrical relations in dislocated crystals10.1016/0001-6160(53)90054-6 ↗
71. Fisher · 1961
72. Prediction of crystallographic texture evolution and anisotropic stress-strain curves during large plastic strains in high purity α-titanium using a Taylor-type crystal plasticity model10.1016/j.actamat.2006.08.034 ↗
73. A microcantilever investigation of size effect, solid-solution strengthening and second-phase strengthening for 〈a〉 prism slip in alpha-Ti10.1016/j.actamat.2011.06.005 ↗
74. Experimental and theoretical studies of intergranular strain in an alpha titanium alloy during plastic deformation10.1016/j.actamat.2013.06.022 ↗
75. Experimental evaluation of critical resolved shear stress for the first-order pyramidal c + a slip in commercially pure Ti by micropillar compression method10.1016/j.actamat.2020.06.043 ↗
76. Mechanical properties of titanium hydride10.1016/j.jallcom.2004.04.073 ↗
77. Characterization of titanium hydrides using a hybrid technique of ae and fem during indentation test