Systematic discovery of new nano-scale metastable intermetallic eutectic phases in laser rapid solidified Aluminum-Germanium alloy
Source abstract
Abstract
Laser surface remelting of as-cast Al-Ge eutectic alloy is shown to produce ultrafine lamellar eutectic morphology with interlamellar spacing refined up to ~60 nm and composed of FCC Al solid solution and unusual AlxGey intermetallic phases that do not form during near-equilibrium solidification. The microstructures are characterized and analyzed using a combination of selected area electron diffraction, high-resolution scanning transmission electron microscopy, energy dispersive X-ray spectroscopy to obtain high-resolution elemental maps, and atomistic modeling using density functional theory followed by atomic-scale image simulation. Depending on the local solidification conditions, the crystallography of the AlxGey intermetallic phases in the eutectic microstructure is either monoclinic (C 2/c) or monoclinic (P 21), with high densities of defects in both cases. This is in sharp contrast to the as-cast alloys that showed nominally pure Al and Ge phases with significant solute partitioning and equilibrium FCC and diamond cubic crystal structures, respectively. Corresponding kinetic phase diagrams are proposed to interpret the evolution of nano-lamellar eutectic morphologies with equilibrium Al and metastable AlxGey phases, and to explain increased solid solubility in the Al phases manifested by precipitation of ultrafine clusters of Ge. The reasons for the formation of these metastable eutectics under laser rapid solidification are discussed from the perspective of the competitive growth criterion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Metastability alloy design10.1557/mrs.2019.72 ↗
2. Metastability in high entropy alloys10.1016/j.scriptamat.2020.05.049 ↗
3. Design metastability in high-entropy alloys by tailoring unstable fault energies10.1126/sciadv.abo7333 ↗
4. Metastable structures in metallurgy10.1007/BF02648333 ↗
5. Metastable metallic alloys10.1002/(SICI)1521-396X(199912)176:2<801::AID-PSSA801>3.0.CO;2-W ↗
6. Competition between stable and metastable phases during mechanical alloying and ball milling10.1002/pssa.2211310237 ↗
7. Formation of metastable crystalline phases in light-metal systems by rapid solidification10.1080/13642819008219289 ↗
8. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
9. Heat treatment effects on the metastable microstructure, mechanical property and corrosion behavior of Al-added CoCrFeMnNi alloys fabricated by laser powder bed fusion10.1016/j.jmst.2022.08.018 ↗
10. Aged metastable high-entropy alloys with heterogeneous lamella structure for superior strength-ductility synergy10.1016/j.actamat.2020.08.043 ↗
11. Eutectics and the formation of amorphous alloys10.1038/339363a0 ↗
12. Metastable solidification pathways of undercooled eutectic CoSi–CoSi2 alloys10.1016/j.actamat.2019.06.048 ↗
13. Competition between stable and metastable eutectic growth in Sn-Ni alloys10.1016/j.actamat.2018.02.034 ↗
14. Plastic homogeneity in nanoscale heterostructured binary and multicomponent metallic eutectics: an overview10.1016/j.cossms.2022.101055 ↗
15. A review on nano-/ultrafine advanced eutectic alloys10.1016/j.jallcom.2020.154226 ↗
16. Two-zone microstructures in Al-18Si alloy powders10.1007/s11661-017-4432-z ↗
17. Nanomechanical behavior of impulse atomized Al-Ce eutectic particles10.1016/j.msea.2024.147296 ↗
18. Numerical model of rapidly solidified droplets of Al–33 Wt Pct Cu eutectic growth10.1007/s11661-021-06504-1 ↗
19. Enabling plastic co-deformation of disparate phases in a laser rapid solidified Sr-modified Al–Si eutectic through partial-dislocation-mediated-plasticity in Si10.1016/j.msea.2023.145648 ↗
20. Microstructure evolution and high density of nanotwinned ultrafine Si in hypereutectic Al-Si alloy by laser surface remelting10.1016/j.matchar.2020.110147 ↗
21. Three-dimensional morphology of an ultrafine Al-Si eutectic produced via laser rapid solidification10.1016/j.scriptamat.2023.115471 ↗
22. Mechanical behavior of Al–Al2Cu–Si and Al–Al2Cu eutectic alloys10.3390/cryst11020194 ↗
23. Interface-mediated plasticity of nanoscale Al–Al2Cu eutectics10.1016/j.actamat.2020.01.024 ↗
24. Rapid solidification and non-equilibrium phase constitution in laser powder bed fusion (LPBF) of AlSi10Mg alloy: analysis of nano-precipitates, eutectic phases, and hardness evolution10.1007/s11661-019-05505-5 ↗
25. Multiscale analysis of crystalline defect formation in rapid solidification of pure aluminium and aluminium–copper alloys10.1098/rsta.2020.0319 ↗
26. Solidification in the system Al-Ge-Si: the phase diagram, coring patterns, eutectic growth, and modification10.1007/BF02671944 ↗
27. Nonequilibrium behavior in the Al-Ge alloy system: insights into the metastable phase diagram10.1007/BF02669882 ↗
28. Metastable phase formation during mechanical alloying of Al-Ge and Al-Si alloys10.1016/0925-8388(95)02002-0 ↗
29. Constitution of an Al-37.5Ge splat quenched foil: implications on nucleation kinetics10.1016/0036-9748(86)90225-5 ↗
30. Estimation of the shifting distance of the eutectic point in hypereutectic Al–Si alloys by the lever rule10.1016/j.scriptamat.2006.11.023 ↗
31. Effect of cooling rate on nano-eutectic formation in laser surface remelted and rare earth modified hypereutectic Al-20Si alloys10.3390/cryst12050750 ↗
32. VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data10.1107/S0021889811038970 ↗
33. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
34. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
35. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
36. The abTEM code: transmission electron microscopy from first principles10.12688/openreseurope.13015.1 ↗
37. Phase identification using series of selected area diffraction patterns and energy dispersive spectrometry within TEM10.4236/mr.2014.24008 ↗
38. Identification of the Bravais lattice and cell parameters through quantitative model-based transmission electron microscopy and Niggli cell reduction theory: the case of intermetallic Ni 5 Pb 2 Te 310.1107/S1600576722011451 ↗
39. Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L10.1016/j.actamat.2020.07.063 ↗
40. New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion10.1016/j.actamat.2020.11.018 ↗
41. Modeling the formation of twins and stacking faults in the ag-cu system10.1016/S1359-6454(01)00057-X ↗
42. Structure of a metastable Al-Ge phase determined from large angle CBED patterns10.1080/13642819308217931 ↗
43. An X-ray study by Guinier diffraction camera of Al-Ge alloys rapidly quenched from the melt10.1007/BF00737520 ↗
44. Solidification of aluminium-germanium alloys at high cooling rates10.1007/BF00558182 ↗
45. Constitution and microstructure of rapidly solidified aluminium-germanium alloys10.1080/14786437208229316 ↗
46. Characterization of metastable crystalline phases in the Al Ge alloy system10.1016/0001-6160(85)90137-3 ↗
47. Metastabile Phasen in extrem schnell erstarrten Aluminium-Germanium-Legierungen10.1515/ijmr-1972-630806 ↗
48. Enthalpies of formation of magnesium compounds from first-principles calculations10.1016/j.intermet.2009.03.017 ↗
49. Eutectic and peritectic solidification patterns10.1016/j.cossms.2015.10.002 ↗
50. Chemical modification of degenerate eutectics: a review of recent advances and current issues10.1557/jmr.2018.361 ↗
51. From coherent to semicoherent—evolution of precipitation crystallography in an fcc/bcc system10.1016/j.actamat.2019.12.057 ↗
52. Vander Voort, G.F. (Ed.). (2004). Metallography and Microstructures. ASM International. https://doi.org/10.31399/asm.hb.v09.9781627081771.10.31399/asm.hb.v09.9781627081771 ↗
53. Lamella-rod pattern transition and confinement effects during eutectic growth10.1016/j.actamat.2022.118425 ↗
54. Effect of scanning speed on properties of laser surface remelted 304 stainless steel10.3390/mi13091426 ↗
55. Microstructural study of containerless solidification of Al–20wt%Ce alloy10.1002/adem.202401634 ↗
56. Theory of rod eutectic growth under far-from-equilibrium conditions: nanoscale spacing and transition to glass10.1016/j.actamat.2012.02.020 ↗
57. Solidification microstructure-processing maps: theory and application10.1002/1527-2648(200107)3:7<443::AID-ADEM443>3.0.CO;2-W ↗
58. Growth temperatures and the limits of coupled growth in unidirectional solidification of Fe-C eutectic alloys10.1007/BF02653480 ↗
59. Competitive growth of stable and metastable Fe- C- X eutectics: Part I. experiments10.1007/BF02645199 ↗
60. Multi-step crystallization of self-organized spiral eutectics
61. Kurz · 2023