journal article·2025-01

Enhanced mechanical and flame-retardant properties of as-extruded Mg-6Zn-1Mn magnesium alloy through Er and Ca addition

Mingliang Li, Shicheng Li, Ke Wang, Hongyun Li, Jinxing Wang, Jingfeng Wang

Publisher page

Abstract

This study presents the development of two novel wrought nonflammable magnesium alloys based on the Mg-6Zn-1Mn (ZM61) system, which exhibit an exceptional combination of mechanical and flame-retardant properties. The effect of the single addition of 2.5 wt.% Er and combined addition of 2.0 wt.% Er and 0.5 wt.% Ca on the microstructure evolution, mechanical properties, and flame-retardant behavior of ZM61 alloy is systematically investigated. Results reveal that the addition of Er and Er&Ca promotes dynamic recrystallization, leading to refined grains and weakened basal texture. Notably, the combined addition of Er&Ca exhibits a more significant grain refinement effect. Microstructure analysis shows that the combined addition of Er&Ca alters the second-phase distribution, with the formation of Er-rich phases and Ca-containing compounds. The ZM61-0.5Ca-2.0Er alloy demonstrates excellent comprehensive properties, with an ultimate tensile strength of 360 MPa, a yield strength of 318 MPa, and an elongation of 13.7%. Remarkably, this alloy achieves an ignition temperature exceeding 1000 °C, attributed to the synergistic effect of Er and Ca, which forms a continuous and dense multi-layer composite oxide layer consisting of Er2O3-CaO-MgO. These findings indicates that, compared with single addition of Er, the combined addition of Er&Ca is more efficient to enhance the multifunctionality of magnesium alloys for advanced applications requiring both good mechanical properties and excellent flame-retardant properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. The high temperature oxidation and ignition behavior of Mg–Nd alloys part I: the oxidation of dilute alloys10.1016/j.jallcom.2013.03.130 ↗
2. A study of the flammability of magnesium
3. Development of high-strength magnesium alloys with excellent ignition-proof performance based on the oxidation and ignition mechanisms: a review10.1016/j.jma.2022.12.007 ↗
4. An insight into ignition factors and mechanisms of magnesium based materials: a review10.1016/j.matdes.2016.09.103 ↗
5. Minimum ignition energies of pure magnesium powders due to electrostatic discharges and nitrogen's effect10.1016/j.jlp.2016.03.008 ↗
6. Effect of yttrium, calcium and zirconium on ignition-proof principle and mechanical properties of magnesium alloys10.1016/S1002-0721(10)60642-4 ↗
7. The ignition temperature of Mg alloys WE43, AZ31 and AZ9110.1016/j.corsci.2011.09.004 ↗
8. The high-temperature oxidation resistance properties of magnesium alloys alloyed with Gd and Ca10.1007/s10853-020-05758-1 ↗
9. Enhanced oxidation and overheating resistance of the extruded Mg–Zn–Al–Mn magnesium alloy by Calcium addition10.1016/j.jma.2023.03.004 ↗
10. A review on ignition mechanisms and characteristics of magnesium alloys10.1016/j.jma.2019.11.014 ↗
11. Combined influence of Be and Ca on improving the high-temperature oxidation resistance of the magnesium alloy Mg-9Al-1Zn10.1016/j.corsci.2017.03.023 ↗
12. Beryllium in aluminium and magnesium alloys
13. Behavior of surface oxidation on molten Mg–9Al–0.5Zn–0.3Be alloy10.1016/S0921-5093(00)01798-6 ↗
14. Development of non-flammable high strength AZ91+Ca alloys via liquid forging and extrusion10.1016/j.matdes.2016.03.014 ↗
15. Formation of an incombustible oxide film on a molten Mg-Al-Ca alloy10.1016/j.corsci.2017.01.026 ↗
16. Effect of Y on high-temperature oxidation behavior and products of AZ80 alloy10.1016/j.matchemphys.2021.124732 ↗
17. Flammability of Mg-X Binary Alloys10.1002/adem.201200124 ↗
18. The role of Ca on the microstructure and tensile properties of Mg-Al-Zn-Ca alloys10.1016/j.mtla.2023.101787 ↗
19. Oxidation behavior and incombustibility of molten Mg-Zn-Y alloys with Ca and Be addition10.1016/j.corsci.2018.12.037 ↗
20. Mechanical properties and high-temperature oxidation behavior of Mg-Al-Zn-Ca-Y magnesium alloys
21. Effects of trace Er addition on the microstructure and mechanical properties of Mg–Zn–Zr alloy10.1016/j.matdes.2010.05.008 ↗
22. Ultra-high tensile strength induced by multiple precipitates in extruded ZK60 alloy via co-alloying Ca and Er10.1016/j.jallcom.2023.172680 ↗
23. Microstructure, texture and mechanical properties of Mg–Zn–Er alloys containing I-phase and W-phase simultaneously10.1016/j.jallcom.2015.10.262 ↗
24. Effect of Gd addition on the age hardening response of Mg–6Zn-1Mn alloy10.1016/j.jmrt.2020.05.120 ↗
25. Microstructure and mechanical properties of ZK60-Er magnesium alloys10.1016/j.msea.2015.03.009 ↗
26. The effects of Ca and Mn on the microstructure, texture and mechanical properties of Mg-4 Zn alloy10.1016/j.jma.2020.03.012 ↗
27. Development of high-strength, low-cost wrought Mg–2.5mass% Zn alloy through micro-alloying with Ca and La10.1016/j.matdes.2015.07.029 ↗
28. The microstructure, texture and mechanical properties of extruded Mg–5.3Zn–0.2Ca–0.5Ce (wt%) alloy10.1016/j.msea.2014.10.028 ↗
29. Effect of extrusion parameters on microstructure, texture and mechanical properties of Mg-1.38Zn-0.17Y-0.12Ca (at%) alloy10.1016/j.matchar.2019.03.004 ↗
30. Corrosion behavior, microstructure and mechanical properties of novel Mg-Zn-Ca-Er alloy for bio-medical applications
31. Improving tensile properties and corrosion resistance of Mg-Zn-Ca-Mn alloy via Gd addition10.1016/j.intermet.2023.108000 ↗
32. Effects of homogenization temperature on microstructure and mechanical properties of high-speed-extruded Mg-5Bi-3Al alloy10.1016/j.jma.2021.07.007 ↗
33. Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg-6.0Zn-0.5Mn alloy10.1016/j.jma.2020.06.018 ↗
34. Novel low-cost magnesium alloys with high yield strength and plasticity10.1016/j.msea.2019.138332 ↗
35. Development of high-strength, low-cost wrought Mg-2.0mass% Zn alloy with high Mn content10.1016/j.pnsc.2016.11.016 ↗
36. On the microstructure and mechanical property of as-extruded Mg-Sn-Zn alloy with Cu addition10.1016/j.jallcom.2018.02.013 ↗
37. The oxidation behavior of Mg-Er binary alloys at 500 ℃10.1016/j.corsci.2021.109961 ↗
38. Effect of microalloying with Ca on the microstructure and mechanical properties of Mg-6 mass%Zn alloys10.1016/j.matdes.2016.03.025 ↗
39. Selective oxidation and the third-element effect on the oxidation of Mg-Y alloys at high temperatures10.1007/s11661-009-9874-5 ↗
40. The oxidation of metals at high temperatures
41. Key factor influencing the ignition resistance of magnesium alloys at elevated temperatures10.1016/j.scriptamat.2011.08.019 ↗