journal article·2025-01

Achieving high strength in Mg-Gd-Ag-Zr alloy through heterogeneous microstructure with multimodal grain structure and hierarchical precipitates

Bangjun Li, Jiapeng Sun, Ying Han, Jing Han, Guosong Wu

Publisher page

Abstract

The development of high-strength Magnesium (Mg) alloys is a key research focus due to their relatively low strength compared to other structural metals. In this paper, a high-strength Mg-13.4Gd-2.2Ag-0.4Zr wt% alloy is achieved by carefully designing a multimodal grain structure combined with hierarchical precipitates, using a processing route of hot rolling followed by aging. The multimodal grain structure, characterized by three distinct grain size distribution peaks and a strong basal texture, arises from partial dynamic recrystallization during hot rolling. The hierarchical precipitates include microscale rod-like and particle-like β precipitates at grain boundaries, twins, and deformation bands, as well as nanoscale β precipitates (∼63 nm) dispersed within the grain interiors. The fully β precipitates also demonstrate a modified precipitation pathway, differing from the β` and γ`` nanoprecipitates observed in conventional Mg-Gd-Ag alloys. This unique microstructure results in an ultimate tensile strength of 447 MPa, primarily attributable to the strong basal texture, hierarchical precipitates, hetero-deformation-induced (HDI) strengthening effect, and high-dislocation density.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Ultrafine-grained AZ61 alloy produced by high-pressure torsion: Advent of superplasticity and effect of anisotropy10.1016/j.msea.2023.145240 ↗
2. Grain refinement mechanisms in gradient nanostructured AZ31B Mg alloy prepared via rotary swaging10.1007/s11661-021-06364-9 ↗
3. Effect of superhydrophobic surface on corrosion resistance of magnesium-neodymium alloy in artificial hand sweat10.3390/met13020219 ↗
4. A high-specific-strength and corrosion-resistant magnesium alloy10.1038/nmat4435 ↗
5. Research progress of heterogeneous structure magnesium alloys: A review10.1016/j.jma.2024.04.001 ↗
6. Towards developing Mg alloys with simultaneously improved strength and corrosion resistance via RE alloying10.1016/j.jma.2020.08.016 ↗
7. Fabrication of calcium carbonate coating on magnesium-neodymium alloy for mitigation of corrosion in simulated concrete pore solution
8. Latest research advances on magnesium and magnesium alloys worldwide10.1016/j.jma.2020.02.003 ↗
9. Dissolution and reprecipitation of 14H-LPSO structure accompanied by dynamic recrystallization in hot-extruded Mg89Y4Zn2Li5 alloy10.1016/j.jma.2022.03.018 ↗
10. Inkjet-printed flexible and transparent Ti3C2 Tx /TiO2 composite films: a strategy for photoelectrically controllable photocatalytic degradation10.1002/sstr.202400214 ↗
11. Mechanical behavior of nanocrystalline metals and alloys10.1016/j.actamat.2003.08.032 ↗
12. A review on mechanical properties and microstructure of ultrafine grained metals and alloys processed by rotary swaging10.1016/j.jallcom.2021.163122 ↗
13. Evolution of microstructure and hardness during artificial aging of an ultrafine-grained Al-Zn-Mg-Zr alloy processed by high pressure torsion10.1007/s10853-020-05264-4 ↗
14. Hall-Petch relationship in Mg alloys: A review10.1016/j.jmst.2017.07.022 ↗
15. Current research progress in grain refinement of cast magnesium alloys: A review article10.1016/j.jallcom.2014.09.061 ↗
16. Automated analysis framework of strain partitioning and deformation mechanisms via multimodal fusion and computer vision10.1016/j.ijplas.2024.104119 ↗
17. Influence of high-pressure torsion on microstructure, hardness and shear strength of AM60 magnesium alloy10.1016/j.msea.2020.140158 ↗
18. Extraordinary mechanical properties of AZ61 alloy processed by ECAP with 160° channel angle and EPT10.1016/j.jma.2020.02.028 ↗
19. Bulk nanocrystalline high-strength magnesium alloys prepared via rotary swaging10.1016/j.actamat.2020.09.024 ↗
20. The effect of β' precipitates on mechanical properties and damping capacity in the Mg-Gd alloy10.1016/j.vacuum.2023.112230 ↗
21. Recent progress and perspectives in additive manufacturing of magnesium alloys10.1016/j.jma.2022.03.001 ↗
22. Exceptional thermal stability and enhanced hardness in a nanostructured Mg-Gd-Y-Zn-Zr alloy processed by high pressure torsion10.1016/j.jma.2022.04.003 ↗
23. Applications of magnesium and its alloys: a review10.3390/app11156861 ↗
24. Ultra-high-temperature application of MXene: Stabilization of 2D Ti3C2Tx for cross-scale strengthening and toughening of 3D TiC10.26599/JAC.2024.9220830 ↗
25. New strategy for Mg-air battery voltage-efficiency synergy by engineering protective film with cation vacancies on Mg anode surface10.1016/j.jmst.2024.06.029 ↗
26. Recent research and developments on wrought magnesium alloys10.1016/j.jma.2017.09.001 ↗
27. Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion10.1016/j.actamat.2018.04.003 ↗
28. Recent developments in high-strength Mg-RE-based alloys: Focusing on Mg-Gd and Mg-Y systems10.1016/j.jma.2018.08.001 ↗
29. Deformation behavior of ultra-strong and ductile Mg-Gd-Y-Zn-Zr alloy with bimodal microstructure10.1007/s11661-018-4507-5 ↗
30. Regulating microstructure and improving precipitation hardening response of fine-grained Mg-RE-Ag hot-extruded alloy by extreme short-time heat treatment10.1016/j.msea.2023.146059 ↗
31. Regulating Precipitates by Simple Cold Deformations to Strengthen Mg Alloys: A Review10.3390/ma12162507 ↗
32. Achieving exceptionally high strength in binary Mg-13Gd alloy by strong texture and substantial precipitates10.1016/j.scriptamat.2020.10.052 ↗
33. Achieving ultra-high strength in Mg-Gd-Ag-Zr wrought alloy via bimodal-grained structure and enhanced precipitation10.1016/j.jmst.2020.04.031 ↗
34. Development and characteristics of a low rare-earth containing magnesium alloy with high strength-ductility synergy10.1016/j.jma.2022.01.005 ↗
35. Developing a high-performance Mg-5.7Gd-1.9Ag wrought alloy via hot rolling and aging10.1016/j.msea.2020.140707 ↗
36. Synchronous improvement in mechanical properties and corrosion resistance of Mg-Gd-Ag-Zr alloy through nanoprecipitates10.1016/j.jmrt.2023.07.274 ↗
37. Microstructure evolution and mechanical properties of an ultra-high strength casting Mg-15.6Gd-1.8Ag-0.4Zr alloy10.1016/j.jallcom.2014.07.028 ↗
38. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
39. A new metastable precipitate phase in Mg-Gd-Y-Zr alloy10.1080/14786435.2014.913115 ↗
40. Achieving excellent ductility in high-strength Mg-10.6Gd-2 Ag alloy via equal channel angular pressing10.1016/j.jallcom.2019.152688 ↗
41. Effect of Ag on interfacial segregation in Mg-Gd-Y -( Ag)- Zr alloy10.1016/j.actamat.2015.05.020 ↗
42. Mechanical properties and deformation mechanisms of a novel fine-grained Mg-Gd-Y-Ag-Zr-Ce alloy with high strength-ductility synergy10.1016/j.jmst.2020.05.028 ↗
43. Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer10.1016/j.actamat.2020.07.055 ↗
44. Microstructure and anisotropic mechanical behavior of the high-strength and ductility AZ91 Mg alloy processed by hot extrusion and multi-pass RD-ECAP10.1016/j.msea.2020.139191 ↗
45. Effect of rolling reduction on microstructure, texture, mechanical properties and mechanical anisotropy of AZ31 magnesium alloys10.1016/j.msea.2014.06.034 ↗
46. Balanced strength and ductility by asymmetric gradient nanostructure in AZ91 Mg alloy10.1016/j.jmst.2023.10.027 ↗
47. Superior mechanical properties and deformation mechanisms of a 304 stainless steel plate with gradient nanostructure10.1016/j.ijplas.2022.103336 ↗
48. Towards designing high mechanical performance low-alloyed wrought magnesium alloys via grain boundary segregation strategy: A review10.1016/j.jma.2024.03.016 ↗
49. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗
50. Double heterogeneous structures induced excellent strength-ductility synergy in Ni 40 Co 30 Cr 20 Al 5 Ti 5 medium-entropy alloy10.1016/j.jmst.2023.10.011 ↗
51. The interaction of grain refinement and ageing in magnesium-zinc-zirconium ( ZK) alloys10.1016/j.actamat.2015.05.012 ↗