Research on hot workability and deformation mechanism of as-extruded Ti-6554 alloy over a broad temperature range
Source abstract
Abstract
The favorable mechanical characteristics of Ti-6554 offer potential uses in the aerospace industry. To broaden the potential uses of as-extruded Ti-6554 alloy, it is essential to conduct additional assessments on its hot workability and deformation mechanisms. This study, through a series of hot compression tests conducted over a broad temperature range using a thermal simulation testing machine, established the activation energy map and the hot processing map, while examining the evolution of microstructures and deformation mechanisms. The findings indicate that the activation energy of the Ti-6554 alloy reduces as strain rises. The ideal conditions for hot processing are 850–900 °C and 10 −3-10 −2 s −1. The precipitation of the α phase occurs when deforming in the two-phase region, some maintain burgers orientation relationship (BOR) with the matrix, and some maintain random orientation with the matrix. In addition, the α phase precipitation significantly promotes dynamic recrystallization (DRX), resulting in obvious flow softening. The examination of misorientation angles reveals that DRX mechanisms of the β phase. At a slow strain rate, DDRX gradually dominates as the temperature rises. At constant temperatures, CDRX increasingly takes precedence with the increase of strain rate.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Homogeneous α-precipitation and enhanced plasticity in Ti–6Cr–5Mo–5V–4Al high-strength metastable titanium alloy with heterogenous β-structure10.1016/j.msea.2022.144180 ↗
2. Plastic instability in Ti–6Cr–5Mo–5V–4Al metastable β-Ti alloy containing the β-spinodal decomposition structures10.1016/j.msea.2021.141052 ↗
3. Dynamic recrystallization mechanism of Ti-6554 alloy during high-temperature deformation10.1016/j.jallcom.2023.170534 ↗
4. Influence of ageing temperature and heating rate on the properties and microstructure of β Ti alloy, Ti–6Cr–5Mo–5V–4Al10.1016/j.msea.2011.10.040 ↗
5. Lubrication in hot tube extrusion of superalloys and Ti alloys
6. Experimental investigation on dynamic phase transformation and texture evolution of Ti55531 high strength titanium alloy during hot compression in the α+β region10.1016/j.msea.2019.138851 ↗
7. Hot deformation behavior, superplasticity and microstructure evolution of a new hot isostatic pressed nickel-based superalloy10.1016/j.msea.2023.145997 ↗
8. Hot workability and microstructure control in Monel®400 (Ni–30Cu) alloy: an approach using processing map, constitutive equation and deformation modeling10.1016/j.msea.2021.141855 ↗
9. Characterization of hot workability of IN617B alloy using activation energy, Zener-Hollomon parameter and hot processing maps10.1016/j.jmrt.2023.08.259 ↗
10. Unraveling hot deformation behavior and microstructure evolution, flow stress prediction of powder metallurgy BCC/B2 Al1.8CrCuFeNi2 HEA10.1016/j.jallcom.2023.172828 ↗
11. Hot deformation behavior originated from dislocation activity and beta to alpha phase transformation in a metastable beta titanium alloy10.1016/j.ijplas.2019.03.011 ↗
12. deformation and dynamic α-globularization of a Ti-17 alloy: consistent physical model10.1016/j.matdes.2020.109266 ↗
13. Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3Al10.1016/j.jallcom.2017.03.219 ↗
14. Hot deformation behavior of near-β titanium alloy Ti-3Mo-6Cr-3Al-3Sn based on phenomenological constitutive model and machine learning algorithm10.1016/j.jallcom.2023.172052 ↗
15. Flow softening and microstructural evolution of near β titanium alloy Ti-55531 during hot compression deformation in the α + β region10.1016/j.jallcom.2023.170165 ↗
16. L. Bolzoni. Comparison of hot deformation behaviour and microstructural evolution for Ti-5Al-5V-5Mo-3Cr alloys prepared by powder metallurgy and ingot metallurgy approaches10.1016/j.matdes.2019.107682 ↗
17. Evaluation of the hot workability and deformation mechanisms for a metastable beta titanium alloy prepared from powder10.1016/j.matchar.2019.01.031 ↗
18. Flow softening and microstructural evolution of near β titanium alloy Ti-35421 during hot compression deformation in the α+β region10.1016/j.jmrt.2022.05.144 ↗
19. Hot deformation behavior and mechanism of a new metastable β titanium alloy Ti–6Cr–5Mo–5V–4Al in single phase region10.1016/j.msea.2021.141231 ↗
20. Characterization of hot workability of Ti-6Cr-5Mo-5V-4Al alloy based on hot processing map and microstructure evolution10.1016/j.jallcom.2022.164161 ↗
21. Constitutive modelling, dynamic globularization behavior and processing map for Ti-6Cr-5Mo-5V-4Al alloy during hot deformation10.1016/j.jallcom.2019.05.031 ↗
22. The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining10.1016/j.ijmachtools.2012.07.006 ↗
23. An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti–6Cr–5Mo–5V–4Al beta titanium alloy10.1016/j.ijmachtools.2012.06.004 ↗
24. Experimental and simulated investigation of the deformation behavior and microstructural evolution of Ti6554 titanium alloy during an electropulsing-assisted microtension process10.1016/j.msea.2022.142745 ↗
25. Study on coarse grain refinement of Ti-6554 billet in hot extrusion process10.1007/s00170-024-13246-y ↗
26. Hot deformation behavior and constitutive modeling of fine grained Inconel 718 superalloy10.1016/j.jallcom.2017.12.265 ↗
27. Initial flow softening and restoration mechanisms of isothermally compressed Ti-5Al-2Sn-2Zr-4Mo-4Cr with basketweave microstructure10.1016/j.msea.2017.04.107 ↗
28. Investigation of deformation behavior and microstructure evolution of a Ti-6Al-4V-0.5Ni-0.5Nb-0.05Ru alloy10.1016/j.matchar.2021.110928 ↗
29. Processing maps for the Cu-Cr-Zr-Y alloy hot deformation behavior10.1016/j.msea.2016.03.033 ↗
30. Hot deformation behaviour and microstructure evolution of Al-3%Mg2Si alloy10.1016/j.matchar.2021.111623 ↗
31. Hot deformation behavior and processing map of a Sn0.5CoCrFeMnNi high entropy alloy with dual phases10.1016/j.msea.2020.140394 ↗
32. Modelling of hot deformation for microstructural control10.1179/imr.1998.43.6.243 ↗
33. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
34. Ziegler's criterion on the instability regions in processing maps10.1023/A:1006541710533 ↗
35. Deformation behavior and microstructure evolution during hot working of a coarse-grained Ti-5Al-5Mo-5V-3Cr-1Zr titanium alloy in beta phase field10.1016/j.msea.2017.03.095 ↗
36. Systematic analysis of the softening mechanism and texture evolution of Ti–6Cr–5Mo–5V–4Al alloy during hot compression in α+β phase region10.1016/j.msea.2022.143571 ↗
37. Precipitation behavior of a β-quenched Ti-5Al-5Mo-5V-1Cr-1Fe alloy during high-temperature compression10.1016/j.matchar.2019.03.034 ↗
38. Phase precipitation behavior during isothermal deformation in β-quenched near beta titanium alloy Ti-733310.1016/j.jallcom.2016.02.102 ↗
39. The evolution of microstructure of Ti–6Al–4V alloy during concurrent hot deformation and phase transformation10.1016/j.msea.2012.04.025 ↗
40. Thermomechanical processing of Ti–5Al–5Mo–5V–3Cr10.1016/j.msea.2008.01.055 ↗
41. Precipitation behaviors and orientation evolution mechanisms of α phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation10.1016/j.matchar.2020.110471 ↗
42. Spheroidization of the lamellar microstructure in Ti–6Al–4V alloy during warm deformation and annealing10.1016/j.actamat.2011.03.037 ↗
43. The influence of temperature and strain rate on the deformation response and microstructural evolution during hot compression of a titanium alloy Ti–6Al–4V–0.1B10.1016/j.jallcom.2012.08.123 ↗
44. Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression10.1016/j.jallcom.2019.04.319 ↗
45. Hot deformation behavior and microstructure evolution of TC11 dual-phase titanium alloy10.1016/j.msea.2024.146331 ↗
46. Hot compression deformation behavior and processing maps of ATI 718Plus superalloy10.1016/j.jallcom.2020.155195 ↗
47. Study on the dynamic recrystallization mechanisms of Inconel 740 superalloy during hot deformation10.1016/j.jallcom.2019.153325 ↗
48. Dynamic recrystallization behavior of a γ′-hardened nickel-based superalloy during hot deformation10.1016/j.jallcom.2014.11.056 ↗
49. Theories and applicability of grain size piezometers: the role of dynamic recrystallization mechanisms10.1016/j.jsg.2008.03.004 ↗
50. Microstructural evolution and dynamic recrystallization of a nickel-based superalloy PM EP962NP during hot deformation at 1150 °C10.1016/j.jmrt.2022.03.033 ↗
51. R.E. Loge. A review of dynamic recrystallization phenomena in metallic materials10.1016/j.matdes.2016.09.012 ↗
52. Mean field modelling of dynamic and post-dynamic recrystallization during hot deformation of Inconel 718 in the absence of δ phase particles10.1016/j.msea.2015.12.102 ↗
53. Discontinuous dynamic recrystallization and nucleation mechanisms associated with 2-, 3- and 4-grain junctions of polycrystalline nickel-based superalloys
54. Hot forging characteristic of Ti–5Al–5V–5Mo–3Cr alloy with single metastable β microstructure10.1016/j.msea.2014.06.006 ↗