journal article·2024-12

Effect of ZrC particle on microstructure and corrosion behavior of CoCrNi medium-entropy alloy fabricated by powder plasma arc cladding

Kun Bin, Ping Yao, Riheng He, Peimei Zhang, Qiang Zhu

Publisher page

Abstract

Medium-entropy alloys (MEAs) show significant potential as corrosion-resistant coatings. However, their industrial applications are limited by fabrication challenges and low efficiency. This study synthesized CoCrNi(ZrC)x MEA coatings using powder plasma arc cladding (PPAC) technology. The CoCrNi(ZrC)x MEAs consist of columnar and equiaxed grains. Incorporating ZrC refines the grain structure, achieving maximum refinement at x = 3. This refinement enhances the coating hardness by approximately 40 % (from 165 ± 3.36 to 229 ± 4.83 HV 0.1), mainly due to Hall-Petch strengthening, solid solution effects, and grain boundary and dispersion strengthening. In 3.5 wt% NaCl solution, corrosion resistance was notably improved, as evidenced by a substantial decline in corrosion pits and an 81 % (from 4.52 to 0.86 μA/cm²) reduction in i corr. This enhancement is primarily due to ZrC reducing the exposed surface area of the coating and providing protection through localized Cr segregation at anodic sites. This study is the first to introduce ZrC ceramic particles into CoCrNi MEAs, advancing the development of corrosion-resistant coatings.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Powder plasma arc additive manufacturing of (AlTi)2x(CoCrNi)100–2x medium-entropy alloys: microstructure evolution and mechanical properties10.1016/j.jallcom.2023.172474 ↗
4. Effects of annealing process parameters on microstructural evolution and strength-ductility combination of CoCrFeMnNi high-entropy alloy10.1016/j.msea.2022.142880 ↗
5. Effects of silicon and neodymium additions on microstructures and mechanical properties of CoCrNi medium entropy alloy films10.1016/j.surfcoat.2023.130206 ↗
6. Triple-wire plasma arc cladding of Cr-Fe-Ni-Tix high-entropy alloy coatings10.1016/j.surfcoat.2022.128638 ↗
7. Powder plasma arc additive manufacturing of CoCrFeNiWx high-entropy alloys: microstructure evolution and mechanical properties10.1016/j.jallcom.2022.166245 ↗
8. Corrosion of Al CoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior10.1016/j.corsci.2017.02.019 ↗
9. Anomalous decrease in X-ray diffraction intensities of Cu-Ni-Al-Co-Cr-Fe-Si alloy systems with multi-principal elements10.1016/j.matchemphys.2007.01.003 ↗
10. Microstructure and enhanced tensile properties of AlCoxCrFeNi high entropy alloys with high Co content fabricated by laser melting deposition10.1016/j.jallcom.2022.165403 ↗
11. Mechanical and microstructural characterization of powder metallurgy CoCrNi medium entropy alloy10.1016/j.msea.2017.06.086 ↗
12. Superior strength-ductility CoCrNi medium-entropy alloy wire10.1016/j.scriptamat.2020.02.002 ↗
13. Effects of hot isostatic processing and hot rolling on direct energy deposited CoCrNi medium entropy alloy-Microstructural heterogeneity, wear behaviour and corrosion characteristics10.1016/j.matchar.2023.113304 ↗
14. The mechanical and oxidation properties of novel B2-ordered Ti2ZrHf0.5VNb0.5Alx refractory high-entropy alloys10.1016/j.matchar.2021.111287 ↗
15. Radiation-induced segregation on defect clusters in single-phase concentrated solid-solution alloys10.1016/j.actamat.2017.01.019 ↗
16. Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: example of an AlxCoCrFeNi high-entropy alloy10.1016/j.actamat.2020.116505 ↗
17. Effect of heat treatment on microstructure and mechanical properties of Al1.2CoCrFeNi2.1 high-entropy alloy fabricated by powder plasma arc additive manufacturing10.1016/j.msea.2022.144129 ↗
18. Triple-wire plasma-arc additive manufacturing of Al-Cr-Fe-Ni medium-entropy alloys: microstructure and mechanical properties10.1016/j.matchar.2024.113889 ↗
19. Strengthening and deformation mechanism of high-strength CrMnFeCoNi high entropy alloy prepared by powder metallurgy10.1016/j.jmst.2022.06.009 ↗
20. Tailoring the strength and ductility of Al0.25CoCrFeNi high entropy alloy through cryo-rolling and annealing10.1016/j.msea.2021.141964 ↗
21. Study on the effect of ZrC and CNTs particles on Inconel 625 coatings fabricated by coaxial-wire-feed laser cladding10.1016/j.jmrt.2024.02.107 ↗
22. Effect of Mo addition on structures and properties of FeCoNiCrMn high entropy alloy film by direct current magnetron sputtering
23. Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings10.1016/j.jallcom.2020.157140 ↗
24. Factors determining solid solution phase formation and stability in CoCrFeNiX0.4 (X=Al, Nb, Ta) high entropy alloys fabricated by powder plasma arc additive manufacturing10.1016/j.jallcom.2020.157625 ↗
25. Microstructure evolution of additively manufactured CoCrFeNiAl0.4 high-entropy alloy under thermo-mechanical processing10.1016/j.jmrt.2021.12.007 ↗
26. Strong yet ductile eutectic high-entropy FCC/Laves composite fabricated by powder plasma arc additive manufacturing: mechanical property, microstructure evolution, and constitutive description over a wide range of temperatures and strain rates10.1016/j.jmrt.2023.12.166 ↗
27. Corrosion behaviour of Ti6Al4VxCryNi alloys fabricated by μ-plasma arc powder additive manufacturing process10.1016/j.jallcom.2024.173980 ↗
28. Long-term structural stability and excellent mechanical properties of CoCrNi system medium entropy alloys10.1016/j.jallcom.2022.165206 ↗
29. Powder plasma arc additive manufactured CoCrFeNi(SiC)x high-entropy alloys: microstructure and mechanical properties10.1016/j.matlet.2020.128736 ↗
30. Effect of minor elements Al and Ti on dynamic deformation and fracture of CoCrNi-based medium-entropy alloys10.1016/j.msea.2023.145535 ↗
31. Predicting the effect of Ta on the mechanical behaviour and experimental validation of novel six component Fe-Co-Ni-Cr-V-Ta eutectic high entropy alloys10.1016/j.ijrmhm.2024.106572 ↗
32. Thermodynamic properties of refractory Mo-Nb-V-Ti high entropy alloys (HEAs)10.1016/j.jallcom.2023.173279 ↗
33. In-situ Mo nanoparticles strengthened CoCrNi medium entropy alloy10.1016/j.jallcom.2019.05.208 ↗
34. Enhanced strength and ductility of a tungsten-doped CoCrNi medium-entropy alloy10.1557/jmr.2018.247 ↗
35. TiC strengthened CoCrNi medium entropy alloy: dissolution and precipitation of TiC and its effect on microstructure and performance10.1016/S1003-6326(22)65946-6 ↗
36. Characterization of dispersoids in Fe-13Cr-3.5Al-2.0Mo-0.5 wt% ZrC alloy10.1016/j.matchar.2023.112811 ↗
37. Effect of Zr addition on the microstructures and mechanical properties of ZrC-FeCrAl alloys10.1016/j.msea.2022.144205 ↗
38. Synthesis, microstructure and properties of Ti(C,N)-(HfZrTaNbTi)C5-HEA high-entropy cermets by high-energy ball milling and spark plasma sintering10.1016/j.ceramint.2022.07.036 ↗
39. Strengthening CoCrFeNi high entropy alloy by in-situ phases of laves and ZrC10.1007/s12540-022-01314-5 ↗
40. Fabrication of the ZrC reinforced Ni W composite coating and exploration of its mechanical properties and corrosion resistance10.1016/j.surfcoat.2021.127413 ↗
41. High frequent cyclic ablations of AlSi alloy modified C/C-SiC-ZrB2-ZrC at different temperatures10.1016/j.jallcom.2024.174364 ↗
42. Effects of ZrC content on the microstructure and mechanical property of ZrC/ZTA composites consolidated by hot pressing10.1016/j.jallcom.2020.158402 ↗
43. Liquid phase cladding of AlxCoCrFeNi high entropy alloys on AISI 304 L stainless steel10.1016/j.surfcoat.2020.126331 ↗
44. Design and characterization of FeCrCoAlMn0.5Mo0.1 high-entropy alloy coating by ultrasonic assisted laser cladding10.1016/j.jallcom.2020.155449 ↗
45. Elevated-temperature cyclic deformation mechanisms of CoCrNi in comparison to CoCrFeMnNi10.1016/j.scriptamat.2022.114926 ↗
46. High-strength NbMoTaX refractory high-entropy alloy with low stacking fault energy eutectic phase via laser additive manufacturing10.1016/j.matdes.2021.109462 ↗
47. Grain boundary relaxation behavior and phase stability of AlCrTiVx (x= 0, 0.5 and 1) high-entropy alloys10.1016/j.scriptamat.2021.114144 ↗
48. Grain size dependent deformation behavior of a metastable Fe40Co20Cr20Mn10Ni10 high-entropy alloy10.1016/j.jallcom.2021.160876 ↗
49. Mechanical performance improvement by nitrogen addition in N-CoCrNi compositionally complex alloys10.1007/s11661-020-05738-9 ↗
50. Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition10.1016/j.jallcom.2020.158286 ↗
51. Additive manufacturing of fine-grained and dislocation-populated CrMnFeCoNi high entropy alloy by laser engineered net shaping10.1016/j.msea.2019.138056 ↗
52. Effect of high Fe content on the microstructure, mechanical and corrosion properties of AlCoCrFeNi high-entropy alloy coatings prepared by gas tungsten arc cladding10.1016/j.surfcoat.2021.127242 ↗
53. Microstructure and compressive properties of multiprincipal component AlCoCrFeNiCx alloys10.1016/j.jallcom.2010.10.047 ↗
54. Anomalous residual austenite formation in root of welding layers of 9% Cr/CrMoV dissimilar welded joint10.1007/s42243-018-0121-4 ↗
55. Ultrastrong and ductile (CoCrNi)94Ti3Al3 medium-entropy alloys via introducing multi-scale heterogeneous structures10.1016/j.jmst.2022.06.048 ↗
56. Mechanical and corrosion properties of nano ZrC reinforced FeCrAl alloys10.1108/ACMM-09-2023-2896 ↗
57. Effect of ZrC on the microstructure and properties of CrMnFeCoNi high-entropy alloy coatings prepared by a plasma transferred arc process10.3390/ma16237401 ↗
58. Microstructure and tensile properties of nano-sized ZrC particle strengthened RAFM steels10.1016/j.msea.2022.144241 ↗
59. Effects of SiC on microstructure and properties of plasma sprayed ZrB2–ZrC composite coating10.1016/j.ceramint.2021.01.135 ↗
60. Effect of SiC addition on the microstructures and wear resistance of ZrB2-ZrC reinforced Ni-based composite coatings10.1088/2053-1591/ab2fc5 ↗
61. Ultrasonic induces grain refinement in gas tungsten arc cladding AlCoCrFeNi high-entropy alloy coatings10.1016/j.msea.2021.141607 ↗
62. Enhanced corrosion resistance of laser aided additive manufactured CoCrNi medium entropy alloys with oxide inclusion10.1016/j.corsci.2021.109965 ↗
63. A comparative study on the corrosion behavior of CoCrNi medium-entropy alloy and 316 L stainless steel in simulated marine environment10.1016/j.intermet.2021.107370 ↗
64. Microstructure and corrosion behavior of FeCrNiCoMnx (x = 1.0, 0.6, 0.3, 0) high entropy alloys in 0.5 M H2SO410.1016/j.corsci.2021.109694 ↗
65. Synergistic effect of Zr addition and grain refinement on corrosion resistance and pitting corrosion behavior of single α-phase Ti-Zr-based alloys10.1016/j.jallcom.2021.163013 ↗
66. Microstructure and corrosion properties of FeCoNiCrMn high entropy alloy coatings prepared by high speed laser cladding and ultrasonic surface mechanical rolling treatment10.1016/j.matlet.2019.126769 ↗
67. Grain size distribution effects on the corrosion behaviour of materials10.1016/j.corsci.2012.04.040 ↗
68. Microstructure and properties of in-situ synthesized ZrC-Al3Zr reinforced composite coating on AZ91D magnesium alloy by laser cladding10.1016/j.surfcoat.2017.12.007 ↗