Novel Fe-rich hypo-eutectic high entropy alloy developed for laser powder bed fusion in the Al-Co-Cr-Fe-Ni-Zr system
Source abstract
Abstract
A novel heat resistant Fe-rich hypo-eutectic high entropy alloy (HEA) was manufactured using laser powder bed fusion (LPBF). The prealloyed Al1/4Co2Cr2Fe6Ni3/2Zr powder was characterized and processed using different preheating temperatures (650°C, 700°C and 800°C). The as-built microstructure showed dissimilar morphologies throughout the melt pool, with eutectic grains of ultra fine lamella spacing (¿˜25 nm) inside the core regions, and coarser dendritic and globulitic growth patterns at the interlayer boundaries (ILBs). An annealing treatment at 1000°C for 6 h yielded a homogenous composite microstructure of a Fe-rich matrix with ~40% of fine dispersed Zr-rich intermetallic (IM) phases of submicron size. Synchrotron high energy x-ray di¿raction (HEXRD) revealed M2Zr Laves (M = Co, Fe, Ni) as the main IM for the as-built condition and the additional growth of M23Zr6 upon annealing. Further HEXRD in-situ high temperature tests examined the lattice parameter evolution and coefficient of thermal expansion (CTE) up to 1100°C. The mechanical performance of the as-built and annealed condition was evaluated through hardness and compression testing at room temperature (RT). Additional compression testing from RT to 1000°C were conducted on the annealed condition to assess the high temperature strength and give comparison to other high temperature materials like Ni-based superalloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (79)
Show source-provided references
1. Aircraft Engines and Gas Turbines
2. Methods Of Increasing Thermal Efficiency Of Steam And Gas Turbine Plants
3. High-temperature materials for structural applications: new perspectives on high-entropy alloys, bulk metallic glasses, and nanomaterials10.1557/mrs.2019.257 ↗
4. Effect of hydrogen-blended natural gas on combustion stability and emission of water heater burner10.1016/j.csite.2022.102246 ↗
5. Materials challenges in hydrogen-fuelled gas turbines10.1080/09506608.2021.1981706 ↗
6. A review on fundamental of high entropy alloys with promising high–temperature properties10.1016/j.jallcom.2018.05.067 ↗
7. Precipitation-hardened high-entropy alloys for high-temperature applications: a critical review10.1557/mrs.2019.255 ↗
8. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
9. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
10. Acta materialia a critical review of high entropy alloys and related concepts
11. Hydrogen enhances strength and ductility of an equiatomic high-entropy alloy
12. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
13. Strong and ductile non-equiatomic high-entropy alloys: design, processing, microstructure, and mechanical properties10.1007/s11837-017-2540-2 ↗
14. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
15. Mechanical properties of Nb25Mo25Ta 25W25 and V20Nb20Mo 20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
16. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys10.1016/j.actamat.2014.01.029 ↗
17. Non-equiatomic high entropy alloys: approach towards rapid alloy screening and property-oriented design10.1016/j.msea.2015.09.010 ↗
18. Towards ferrous medium-entropy alloys with low-cost and high-performance10.1016/j.scriptamat.2020.05.030 ↗
19. Exploring the compositional space of high-entropy alloys for cost-effective high-temperature applications10.3389/fmats.2021.816610 ↗
20. Developing new type of high temperature alloys–high entropy superalloys
21. Design of novel precipitate-strengthened Al-Co-Cr-Fe-Nb-Ni high-entropy superalloys10.1007/s11661-017-4399-9 ↗
22. Oxide dispersion strengthened CoCrFeNiMn high-entropy alloy10.1016/j.msea.2017.02.068 ↗
23. Mechanical activated synthesis of alumina dispersed FeNiCoCrAlMn high entropy alloy10.1016/j.jallcom.2016.09.080 ↗
24. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
25. A eutectic high-entropy alloy with good high-temperature strength-plasticity balance10.1080/21663831.2019.1650130 ↗
26. Eutectic/eutectoid multi-principle component alloys: a review10.1016/j.matchar.2018.07.030 ↗
27. Promising properties and future trend of eutectic high entropy alloys10.1016/j.scriptamat.2020.06.022 ↗
28. Five decades of research on the development of eutectic as engineering materials10.1016/j.pmatsci.2021.100793 ↗
29. Direct solidification of bulk ultrafine-microstructure eutectic high-entropy alloys with outstanding thermal stability10.1016/j.scriptamat.2019.02.035 ↗
30. Designing eutectic high entropy alloys of CoCrFeNiNbx10.1016/j.jallcom.2015.09.153 ↗
31. A new strategy to design eutectic high-entropy alloys using mixing enthalpy10.1016/j.intermet.2017.09.001 ↗
32. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range10.1016/j.actamat.2016.11.016 ↗
33. A new strategy to design eutectic high-entropy alloys using simple mixture method10.1016/j.matdes.2018.01.025 ↗
34. Data-driven design of eutectic high entropy alloys10.20517/jmi.2023.06 ↗
35. Effects of temperature and microstructure on the triblogical properties of CoCrFeNiNbx eutectic high entropy alloys
36. Ultrafine-grained AlCoCrFeNi2.1 eutectic high-entropy alloy10.1080/21663831.2016.1160451 ↗
37. Enhanced strength–ductility synergy in ultrafine-grained eutectic high-entropy alloys by inheriting microstructural lamellae10.1038/s41467-019-08460-2 ↗
38. A novel equiaxed eutectic high-entropy alloy with excellent mechanical properties at elevated temperatures10.1080/21663831.2020.1772395 ↗
39. Deformation at ambient and high temperature of in situ Laves phases-ferrite composites10.1088/1468-6996/15/3/034801 ↗
40. Superb strength and high plasticity in laves phase rich eutectic medium-entropy-alloy nanocomposites10.1016/j.ijplas.2018.03.001 ↗
41. Additive manufacturing of metallic components – Process, structure and properties10.1016/j.pmatsci.2017.10.001 ↗
42. Strongly out-of-equilibrium columnar solidification during laser powder-bed fusion in additive manufacturing10.1103/PhysRevApplied.11.014025 ↗
43. Laser powder-bed fusion as an alloy development tool: parameter selection for in-situ alloying using elemental powders
44. On the current research progress of metallic materials fabricated by laser powder bed fusion process: a review10.1016/j.jmrt.2022.07.085 ↗
45. Progress in additive manufacturing on new materials: a review10.1016/j.jmst.2018.09.002 ↗
46. Ultrafine Fe-Fe2Ti eutectics by directed energy deposition: insights into microstructure formation based on experimental techniques and phase field modelling
47. Microstructure and mechanical properties of pseudo binary eutectic Al–Mg2Si alloy processed by laser powder bed fusion10.1016/j.jmrt.2023.03.147 ↗
48. Cold-rolling and recrystallization textures of a nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy10.1016/j.intermet.2016.12.018 ↗
49. Microstructure and mechanical properties of CoCrFeNiZr x eutectic high-entropy alloys10.1016/j.matdes.2017.08.030 ↗
50. Development of ultrahigh strength novel Co–Cr–Fe–Ni–Zr quasi-peritectic high entropy alloy by an integrated approach using experiment and simulation
51. Advanced characterization of two novel Fe-rich high entropy alloys developed for laser powder bed fusion in the Al-Co-Cr-Fe-Ni-Zr system
52. Predicting solid solubility in CoCrFeNiMx (M = 4d transition metal) high-entropy alloys10.1063/1.4983762 ↗
53. Microstructure evolution in the hypo-eutectic alloy Al0.75CrFeNi2.1 manufactured by laser powder bed fusion and subsequent annealing10.1016/j.msea.2022.144315 ↗
54. In-situ alloying in powder bed fusion: the role of powder morphology10.1016/j.msea.2021.140849 ↗
55. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
56. The high energy materials science beamline (HEMS) at PETRA III10.4028/www.scientific.net/MSF.772.57 ↗
57. Maud: a Rietveld analysis program designed for the internet and experiment integration10.1107/S0108767300021954 ↗
58. Ultrafine eutectic Ti-Fe-based alloys processed by additive manufacturing – a new candidate for high temperature applications
59. Study of selective laser melting of intermetallic TiAl powder using integral analysis10.1016/j.ijmachtools.2018.02.003 ↗
60. D. Shulze, Powders and Bulk Solids, 2010. https://doi.org/10.1002/cite.201090034.10.1002/cite.201090034 ↗
61. B. Barthel, S.B. Hein, F. Petzoldt, Influence of Particle Size Distribution in Metal Binder Jetting-Effects on the Properties of Green and Sintered Parts, 2019. https://www.researchgate.net/publication/341617148.
62. Unravelling the multi-scale structure–property relationship of laser powder bed fusion processed and heat-treated AlSi10Mg10.1038/s41598-021-85047-2 ↗
63. Residual stress reduction of LPBF-processed CM247LC samples via multi laser beam strategies10.1007/s00170-021-07083-6 ↗
64. Beam shaping technology and its application in metal laser additive manufacturing: a review10.1016/j.jmrt.2023.08.037 ↗
65. Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders10.1016/j.jclepro.2020.122077 ↗
66. Influence of preheating temperature on microstructure evolution and hardness of high-speed steel AISI M50 processed by laser powder bed fusion10.1002/srin.202200784 ↗
67. A true change of NiAl-Cr(Mo) eutectic lamellar structure during high temperature treatment10.1016/j.jallcom.2017.10.159 ↗
68. An assessment of the lattice strain in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.09.032 ↗
69. Phase stability of Fe23Zr6 and thermodynamic reassessment of Fe–Zr system10.1007/s42243-021-00570-w ↗
70. Ab initio theoretical study of magnetization and phase stability of the (Fe,Co,Ni)23B6 and (Fe,Co,Ni)23Zr6 structures of Cr23C6 and Mn23Th6 prototypes10.1103/PhysRevB.78.144414 ↗
71. A first principles study of cohesive, elastic and electronic properties of binary Fe-Zr intermetallics10.1016/j.commatsci.2015.09.012 ↗
72. Synthesis and characterization of thermoelectric co2 xsn (X = zr, hf) heusler alloys10.3390/met10050624 ↗
73. Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys10.1080/14686996.2017.1361305 ↗
74. Elevated temperature notch sensitivity of Inconel 718 manufactured by selective laser melting10.1007/s11665-021-05522-9 ↗
75. Hot compression behavior and microstructure of selectively laser-melted IN718 alloy
76. A. Nowotnik, J. Sieniawski, Effect Of Thermomechanical Working On The Microstructure And Mechanical Properties Of Hot Pressed Superalloy Inconel 718, in: J.R.G.A. banik, I.D.T.P.G.R.H.X.L.A.M.G.P.S. and A.W.-S. E.A. Ott (Ed.), 7th International Symposium on Superalloy 718 and Derivatives, TMS (The Minerals, Metals & Materials Society), 2010.10.7449/2010/Superalloys_2010_383_396 ↗
77. Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures10.1016/j.ijplas.2019.09.002 ↗
78. HAYNES International, HAYNES ® 230 ® Alloy Data Sheet, 2021. https://www.haynesintl.com/wp-content/uploads/2023/06/230-brochure.pdf (accessed March 29, 2024).
79. HAYNES International, HASTELLOY ® X Alloy Data Sheet, 2022. https://www.haynesintl.com/wp-content/uploads/2023/06/x-brochure.pdf (accessed March 29, 2024).