Cool white light emitting Dy3+ activated KNaCa2(PO4)2 phosphor for outdoor lighting and optical thermometric applications
Source abstract
Abstract
Dy 3+ incorporated KNaCa 2(PO 4) 2 phosphor (KNCP) with doping concentrations ranging from 0.005 to 0.7 mol were synthesised via high-temperature solid state reaction route. The morphological characteristics were examined using FESEM images and found agglomerated structure in micrometers with an average particle size of 4.037 µm. Photoluminescence emission spectra under 350 nm excitation reveal nearly equal intense blue and yellow emission bands owing to 4F 9/2→ 6H 15/2 and 4F 9/2→ 6H 13/2 Dy 3+ transitions , respectively. The concentration-dependent emission properties were examined and the optimum concentration was found to be 0.03 mol. The synthesized phosphor exhibits a quantum yield of 69.06 % at the optimal Dy³⁺ doping concentration. The time-correlated emission characteristics were analysed from the TRES plot. Furthermore, the emission bands at 479 nm ( 4F 9/2→ 6H 15/2) and 572 nm ( 4F 9/2→ 6H 13/2) under 350 nm excitation follow bi-exponential decay having an average lifetime in the range of 0.90–0.37 ms. The prepared phosphors exhibit an intense cool white light regardless of doping concentration and delay time. Optical thermometric properties of KNCP Dy phosphor were investigated by fluorescence intensity ratio (FIR) technique and exhibit relative thermal sensitivity of 2.57 and 0.7 %K −1 in the temperature range of 90 −230 K and 250–500 K respectively. The excellent quantum yield, sub-millisecond lifetime, cool colour temperature, and higher temperature sensitivities make them ideal for outdoor lighting and optical thermometric applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Glass properties and applications · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Structure, energy transfer and tunable photoluminescence of Sr7 Zr(PO4)6:Tb3+,Eu3+ phosphors for near-UV white LEDs10.1016/j.jallcom.2017.02.199 ↗
2. Synthesis and photoluminescence properties of a novel Sr2Al6O11:Mn4+ red phosphor prepared with a B2O3 flux10.1016/j.jlumin.2017.10.076 ↗
3. Synthesis and photoluminescence properties of Ca9Y(VO4)7:Dy phosphors for white light-emitting diodes10.1016/j.jlumin.2015.02.048 ↗
4. Tunable optical properties and enhanced thermal quenching of non-rare-earth double-perovskite (Ba1– x Srx)2YSbO6:Mn4+ red phosphors based on composition modulation10.1021/acs.inorgchem.8b00947 ↗
5. Optical thermometry based on vibration sidebands in Y2MgTiO6:Mn4+ double perovskite10.1021/acs.inorgchem.7b02938 ↗
6. Multi-wavelength excited white-emitting K2Gd(1−x)(PO4)(WO4):xDy3+ phosphors with satisfactory thermal properties for UV-LEDs10.1039/C7RA02242E ↗
7. A single Eu2+-activated high-color-rendering oxychloride white-light phosphor for white-light-emitting diodes10.1038/lsa.2016.24 ↗
8. White light emission by Dy3+ doped phosphor matrices: a short review10.1007/s10895-015-1689-8 ↗
9. Synthesis and luminescent properties of Dy3+:GAG nanophosphors10.1016/j.jallcom.2009.03.095 ↗
10. Emerging cool white light emission from Dy3+ doped single phase alkaline earth niobate phosphors for indoor lighting applications10.1039/C5DT02436F ↗
11. Synthesis and luminescence characteristics of Na6Ca(1-x)P2O9:xDy3+ phosphor for outdoor lighting applications10.1016/j.matchemphys.2022.125827 ↗
12. La0.90Dy0.05Nb2O7 nanosheet phosphor and its multilayer films with enhanced host excitation-mediated photoluminescence10.1016/j.jallcom.2012.01.159 ↗
13. Luminescence properties of Dy3+-doped Li2SrSiO4 for NUV-excited white LEDs10.1016/j.optmat.2011.06.018 ↗
14. Color tunable Dy3+-doped Sr9Ga(PO4)7 phosphors for optical thermometric sensing materials10.1016/j.optmat.2020.110133 ↗
15. Investigation of alkali metals (A+ = K, Na, Li) co-doped with samarium ions in the eulytite-type phosphate based phosphors for the enhancement of luminescence properties10.1016/j.jlumin.2019.116951 ↗
16. A reddish orange stoichiometric phosphor LiEu(PO3)4 for white light-emitting diodes10.1016/j.ceramint.2013.10.095 ↗
17. The synthesis and luminescence properties of a novel red-emitting phosphor: Eu3+-doped Ca9La(PO4)710.1007/s00339-017-1226-5 ↗
18. Structural and luminescence performance of the Eu3+ doped alkaline combined metal oxide-based sodium phosphate phosphors; NaMPO4 (M = Mg, Ba, and Ca) for LED applications10.1016/j.inoche.2023.111703 ↗
19. Synthesis and warm white emission performance of single-component Ca7Mg2(PO4)6:Dy3+,Eu3+ phosphor for white light-emitting diodes10.1016/j.ceramint.2023.12.072 ↗
20. Plant habitat-conscious phosphors: tuneable luminescence properties of Dy3+-doped Ca8ZnY(PO4)7 phosphors by co-dopants Mg2+ and B3+10.1016/j.ceramint.2020.01.203 ↗
21. Temperature sensing materials based on the fluorescence intensity ratio in Li2Ba5W3O15:Dy3+ phosphors10.1016/j.sna.2024.115336 ↗
22. Pr3+ doped BaNb2O6 reddish orange emitting phosphor for solid state lighting and optical thermometry applications10.1016/j.jallcom.2019.153342 ↗
23. Development of a potential optical thermometric material through photoluminescence of Pr3+ in La2MgTiO610.1039/C7TC02661G ↗
24. Tunable emission and improved sensitivity of optical thermometry in Ca2+/Sr2+ doped Ba2GdNbO6:Yb3+, Er3+ phosphors10.1016/j.physb.2024.416049 ↗
25. Ratiometric optical temperature sensor with wide range and high sensitivity based on the emission of Dy3+ ion-doped Ca5(PO4)2SiO4 phosphor
26. Insights into the crystal structure and photophysical response of Dy3+ doped Li3Y3Te2O12 for ratiometric temperature sensing
27. Novel transparent glass-ceramics of NaLu2F7:Yb3+,Er3+ for accurate temperature sensing and anti-counterfeiting10.1016/j.jlumin.2024.120627 ↗
28. Luminescence, energy transfer and temperature sensing property of Ce3+, Dy3+ doped LiY9(SiO4)6O2 phosphors10.1016/j.jlumin.2019.05.027 ↗
29. Study on the thermal sensitivity of β-NaYF4: Yb3+-Er3+ nano-thermometers based on luminescence ratiometric technology10.1016/j.cap.2019.01.021 ↗
30. Structural and spectroscopic behaviour of Eu3+-doped SrGd2O4 modified by thermal treatments10.1007/s10853-015-9597-5 ↗
31. X-ray diffraction analysis by Williamson-Hall, Halder-Wagner and size-strain plot methods of CdSe nanoparticles- a comparative study10.1016/j.matchemphys.2019.122021 ↗
32. Tailoring high purity orange-red emission in Sm3+ activated SrTi(PO4)2 phosphor for lighting and display devices10.1016/j.molstruc.2024.138442 ↗
33. Influence of lattice strain on Er3+ ions activated magnesium zirconium phosphate phosphors: Morphological, structural, and photoluminescence properties10.1016/j.mseb.2021.115582 ↗
34. Effect of Sm3+ doping on optical properties of Mg2P2O7 and Mg3P2O8 phosphors10.1016/j.matchemphys.2020.122826 ↗
35. Raman and infrared spectroscopic study of the vivianite-group phosphates vivianite, baricite and bobierrite10.1180/0026461026660077 ↗
36. Electronic energy levels in the trivalent lanthanide aquo ions. I. Pr3+, Nd3+, Pm3+, Sm3+, Dy3+, Ho3+, Er3+, and Tm3+10.1063/1.1669893 ↗
37. Direct optical band gap measurement in polycrystalline semiconductors: a critical look at the Tauc method10.1016/j.jssc.2016.05.010 ↗
38. Use and misuse of the Kubelka-Munk function to obtain the band gap energy from diffuse reflectance measurements10.1016/j.ssc.2021.114573 ↗
39. Anomalous optical absorption limit in InSb10.1103/PhysRev.93.632 ↗
40. Hydrothermal synthesis and luminescent properties of NaLa(MoO4)2:Dy3+ phosphor10.1016/j.jssc.2012.03.003 ↗
41. Structure and luminescence properties of La6Ba4(SiO4)6F2:Dy3+ phosphor with apatite structure10.1039/C8RA08324J ↗
42. Characterization of energy transfer interactions between rare earth ions10.1149/1.2424184 ↗
43. The luminescence properties of Dy-doped high silicate glass10.1016/S0022-3093(97)00139-7 ↗
44. Correlated color temperature as an explicit function of chromaticity coordinates10.1002/col.5080170211 ↗
45. Novel red emitting phosphor-in-glass (PiG) based on Na6CaP2O9:Eu3+ phosphor as an inorganic colour converter for w-LED applications10.1016/j.optmat.2023.114809 ↗
46. Solid-state synthesis of LiYGeO4 and luminescence properties of Dy-doped samples10.1016/j.matchemphys.2023.128082 ↗
47. Lumino-structural properties of Dy3+ activated Na3Ba2LaNb10O30 phosphors with enhanced internal quantum yield for w-LEDs10.1039/D3RA01260C ↗
48. Temperature dependent photoluminescence of Dy3+ doped LiCaBO3 phosphor10.1007/s10854-017-7645-4 ↗
49. Synthesis and characterization of a new double perovskite phosphor: NaCaTiTaO6:Dy3+ with high thermal stability for w-LEDs application10.1016/j.optlastec.2022.108347 ↗
50. Temperature-dependence of efficient up-conversion luminescence in NaY(WO4)2 nanophosphor doped with Er3+ for cryogenic temperature sensor10.1016/j.matchemphys.2018.08.065 ↗
51. Optical thermometry based on fluorescence intensity ratio of Dy3+-doped oxysilicate apatite warm white phosphor10.1016/j.ceramint.2022.10.012 ↗
52. Spectroscopic properties of Dy3+ ions in La3Ga5.5Ta0.5O14 single crystal10.1016/j.jlumin.2019.116989 ↗