Effect of a new two-step austenitizing-Q&P process on the microstructure and mechanical properties of microalloyed 51CrMnV spring steel
Source abstract
Abstract
The evolution of microstructure and mechanical properties were investigated by the two-step austenitizing-Q&P heat treatment for a specific microalloyed 51CrMnV spring steel. The results indicate that the microstructure of the steel treated by two-step austenitizing-Q&P process mainly consists of martensite, retained austenite, proeutectoid ferrite and carbides, with the proeutectoid ferrite predominantly distributed along the prior austenite grain boundaries. As the holding time of the second austenitizing step increased, both the tensile strength and elongation after fracture of the steel exhibited an increasing trend. Under the specific process conditions of austenitizing at 870°C for 30 minutes, followed by a second austenitizing step at 790°C for 2400 s, oil quenching at 120°C, and partitioning at 350°C for 1200 s, the tested steel achieves the best mechanical properties, with a tensile strength of 1845 MPa and an elongation after fracture of 11.4 %. With increasing holding time during the second step of austenitization, the amount and size of proeutectoid ferrite increase. Additionally, variant analysis of the martensite reveals an enhanced dominance of the CP group, resulting in an increase in large-angle grain boundaries. As a result, the spring steel demonstrates improved resistance to crack initiation and propagation, thereby enhancing its strength and plasticity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Development trend of high strength steels usedfor automotive suspension coil spring
2. Microstructure refinement and its effect on properties of spring steel10.1016/j.msea.2014.01.054 ↗
3. Effect of quenching and tempering temperature on microstructure and tensile properties of microalloyed ultra-high strength suspension spring steel10.1016/j.msea.2019.138272 ↗
4. The present situation and the development trend of new materials used in automobile lightweight10.4028/www.scientific.net/AMM.189.58 ↗
5. Research progress on automotive lightweight
6. Effect of modifying the chemical composition on the properties of spring steel10.1007/s11661-018-4713-1 ↗
7. Study on 50CrMnVA flat spring steel heat treatment process
8. Enhanced strain hardening and microstructural characterization in a low carbon quenching and partitioning steel with partial austenization10.1016/j.msea.2015.03.095 ↗
9. Comparison on mechanical properties and microstructure of a C–Mn–Si steel treated by quenching and partitioning (Q&P) and quenching and tempering (Q&T) processes10.1016/j.msea.2014.09.047 ↗
10. Carbon partitioning into austenite after martensite transformation10.1016/S1359-6454(03)00059-4 ↗
11. The "Quenching and Partitioning" process: background and recent progress10.1590/S1516-14392005000400010 ↗
12. Influence of carbon partitioning kinetics on final austenite fraction during quenching and partitioning10.1016/j.scriptamat.2009.03.021 ↗
13. Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment10.1016/j.actamat.2007.08.051 ↗
14. Effect of fresh martensite on the stability of retained austenite in quenching and partitioning steel10.1016/j.msea.2014.07.054 ↗
15. The strengthening and toughening mechanism of dual martensite in quenching-partitioning steels10.1016/j.msea.2019.138765 ↗
16. Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels10.1007/s11661-008-9609-z ↗
17. Effect of quenching and partitioning process on microstructure andmechanical properties of 60Si2Mn spring steel
18. Mechanical and Transformation Behaviors of a C-Mn-Si-Al-Cr TRIP steel under stress
19. Tailoring retained austenite and mechanical property improvement in Al–Si–V containing medium Mn steel via direct intercritical rolling10.1016/j.msea.2022.143904 ↗
20. Ultrafine grained ferrite–martensite dual phase steels fabricated via equal channel angular pressing: Microstructure and tensile properties10.1016/j.actamat.2005.02.015 ↗
21. Influence of martensite composition and content on the properties of dual phase steels10.1007/BF02659924 ↗
22. Parent grain reconstruction from partially or fully transformed microstructures in MTEX10.1107/S1600576721011560 ↗
23. Austenite/ferrite interface migration and alloying elementspartitioning: an overview
24. Carbon diffusion in carbon-supersaturated ferrite and austenite10.1016/j.jallcom.2013.10.058 ↗
25. Controllable selection of martensitic variant enables concurrent enhancement of strength and ductility in a low-carbon steel10.1016/j.ijplas.2023.103704 ↗
26. Effect of crystallographic features on low-temperature fatigue ductile-to-brittle transition for simulated coarse-grained heat-affected zone of bainite steel weld10.1016/j.ijfatigue.2023.107523 ↗
27. Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels10.1016/j.ijplas.2012.11.003 ↗
28. Multiphase microstructure formation and its effect on fracture behavior of medium carbon high silicon high strength steel10.1016/j.jmst.2020.09.034 ↗