Understanding of the correlation of structural and microwave dielectric performance of (1-x)MgTiO3 - xCaTiO3 ceramics for dielectric resonator antenna applications

In this article, the effect of CaTiO ₃ on the structural and microwave dielectric characteristics of MgTiO ₃ has been discussed. The (1-x)MgTiO ₃ - xCaTiO ₃ (abbreviated as (1-x)MT- xCT) for x = 0.025, 0.05, 0.075, 0.1 ceramics have been developed using a solid-state reaction route. The structural as well as morphological characteristics of specimens have been observed by employing X-ray diffraction and scanning electron microscope methods. The Rietveld refinement technique of X-ray diffraction data have been conducted for the refinement of structural phases. It suggests that two crystallographic phases have been present in all materials. The SEM images display dense well-identified grains of (1-x)MT - xCT (for x = 0.025–0.1) ceramics. The Raman spectroscopy method has been employed to detect the symmetry of ceramics and modes of vibration of the materials. The microwave dielectric characteristics like dielectric permittivity (ε _r), loss (tanδ), quality factor (Q×f), and temperature coefficient at resonant frequency (τ _f) of (1-x)MT - xCT (for x = 0.025–0.1) ceramics have been thoroughly investigated. The bond strength, bond valency, bond energy, and tolerance factor of (1-x)MT - xCT (for x = 0.025–0.1) materials have been evaluated and their relation with microwave dielectric characteristics has been discussed. The (1-x)MT - xCT (for x = 0.025–0.1) ceramics show excellent dielectric properties with near to zero τ _f. In addition, DRAs have been designed with (1-x)MT - xCT (for x = 0.025–0.1) materials as dielectric resonators and various antenna properties have been studied with the help of HFSS software. This work suggests that (1-x)MT - xCT for (x=0.05) material can be a promising candidate for DRA applications working in the C band.