journal article·2024-10

Semi-solid rheo-diecast Mg-xGd-3Y–1Zn-0.4Zr (wt%) alloys and their comparison with conventional HPDC alloys

Zhiyu Chang, Qingchen Deng, Yujuan Wu, Jian Feng, Daquan Li, Xukai Ren, Huanwei Yu, Xiyong Du, Guobiao Wang, Yuhao Jin, Qiao Lan, Baoliang Liu, Liming Peng, Wenjiang Ding

Publisher page

Abstract

This work systematically investigated the microstructure and mechanical properties of Mg-xGd-3Y–1Zn-0.4Zr (wt%) alloys prepared via rheo-diecasting (RDC) in comparison to those of conventional high pressure die casting (HPDC) alloys, and revealed their differences in microstructure, casting defects, and mechanical properties. The microstructure of the as-cast RDC Mg-xGd-3Y–1Zn-0.4Zr (wt%) alloys is primarily composed of α-Mg and Mg 3 (Gd,Y,Zn) eutectic phases. Of the four alloys studied, the GWZ831K and GWZ1431K alloys exhibit the best elongation (EL: 6.4±1.3 %) and the highest strengths (UTS: 270±9 MPa; YS: 201±5.7 MPa), respectively. The GWZ831K alloy exhibits a quasi-cleavage fracture during room-temperature tensile tests, whereas the GWZ1431K alloy demonstrates a brittle fracture. The phase composition of conventional HPDC alloys is fundamentally the same as that of RDC alloys, but their grains and eutectic phases differ in morphology and are smaller in size. Oxide films are frequently found in conventional HPDC castings, but neither oxide films nor pore defects are observed in RDC alloys. Compared to conventional HPDC alloys, RDC alloys have better elongation but lower strength. The lower strength of RDC alloys compared to HPDC alloys can be attributed to larger grains and eutectic phases, along with fewer stacking faults (SFs), resulting in limited strengthening effects of grain boundaries, eutectic second phases and SFs. In contrast, RDC alloys exhibit superior elongation compared to HPDC alloys due to the elimination of oxide films and pore defects, as well as the excellent ductility of the α-Mg matrix that can effectively coordinate deformation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Magnesium: properties— applications— potential10.1016/S0921-5093(00)01351-4 ↗
2. Progress and prospects in Mg-alloy super-sized high pressure die casting for automotive structural components10.1016/j.jma.2023.11.003 ↗
3. Characterization of microstructure and nanoscale phase in Mg-15Gd-1Zn (wt%) alloy fabricated by rotating magnetic field casting10.1016/j.matchar.2020.110660 ↗
4. Developing a novel high-strength Mg-Gd-Y-Zn-Mn alloy for laser powder bed fusion additive manufacturing process10.1016/j.jma.2023.09.027 ↗
5. A review on electromagnetic shielding magnesium alloys10.1016/j.jma.2021.10.001 ↗
6. Synergistic improvement of mechanical and electromagnetic shielding properties of a Mg-Li-Y-Zn alloy following heat treatment
7. Semisolid rheoforming of magnesium alloys: a review10.1016/j.matdes.2020.108990 ↗
8. Development of the rheo-diecasting process for magnesium alloys10.1016/j.msea.2005.09.038 ↗
9. The effects of rheo-diecasting on the integrity and mechanical properties of Mg-6Al-1Zn10.1016/j.scriptamat.2005.09.032 ↗
10. A review on casting magnesium alloys: modification of commercial alloys and development of new alloys10.1016/j.jmst.2016.07.001 ↗
11. The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy10.1016/j.jma.2022.05.001 ↗
12. Magnesium research and applications: Past, present and future10.1016/j.jma.2023.11.007 ↗
13. Re-evaluation of the mechanical properties and creep resistance of commercial magnesium die-casting alloy AE4410.1016/j.jma.2021.04.016 ↗
14. Alloy development and process innovations for light metals casting10.1016/j.jmatprotec.2022.117606 ↗
15. Digital image analysis technique for characterization of shrinkage and gas (air) porosity in cast magnesium alloys
16. Magnesium Casting Technology for Structural Applications10.1016/j.jma.2013.02.002 ↗
17. Blistering in semi-solid die casting of aluminium alloys and its avoidance10.1016/j.actamat.2016.11.032 ↗
18. Characterization of flow behavior of semi-solid slurries containing low solid fractions in high-pressure die casting10.1016/j.actamat.2013.07.010 ↗
19. Development of the rheo-diecasting process for Mg-alloys10.4028/www.scientific.net/MSF.488-489.405 ↗
20. Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process10.1016/j.actamat.2005.05.033 ↗
21. Semisolid metal processing10.1179/imr.1994.39.5.173 ↗
22. Modelling the semisolid processing of metallic alloys10.1016/j.pmatsci.2004.04.003 ↗
23. Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting10.1007/s11661-006-0049-3 ↗
24. Effects of rheo-die casting process on the microstructure and mechanical properties of AM50 magnesium alloy10.1179/174328405X51820 ↗
25. Recent developments in high-pressure die-cast magnesium alloys for automotive and future applications10.1016/j.jma.2022.10.001 ↗
26. A forced convection stirring process for Rheo-HPDC aluminum and magnesium alloys10.1016/j.jmatprotec.2016.04.003 ↗
27. The role of the Mg17Al12-phase in the high-pressure die-cast magnesium-aluminum alloy system10.1016/j.jma.2023.08.011 ↗
28. Semi-solid slurry preparation, rheo-die casting and rheo-squeeze casting of an AZ91–2Ca–1.5 Ce ignition-proof magnesium alloy by gas-bubbling process10.1557/jmr.2016.517 ↗
29. Microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy prepared by rheo-diecasting10.1016/j.msea.2022.143287 ↗
30. Evolution of microstructure and mechanical properties of the Rheo-diecast Mg-12Gd-3Y–1Zn-0.4Zr alloy during heat treatment10.4028/p-k6uXTC ↗
31. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
32. Microstructure and strengthening mechanism of high strength Mg–10Gd–2Y–0.5Zr alloy10.1016/j.jallcom.2006.03.015 ↗
33. Cast magnesium alloys for elevated temperature applications10.1007/BF01171534 ↗
34. Formation of 14H-type long period stacking ordered structure in the as-cast and solid solution treated Mg-Gd-Zn-Zr alloys10.1557/jmr.2009.0215 ↗
35. Solute segregation and precipitation in a creep-resistant Mg–Gd–Zn alloy10.1016/j.actamat.2008.08.025 ↗
36. The microstructure evolution with lamellar 14H-type LPSO structure in an Mg96.5Gd2.5Zn1 alloy during solid solution heat treatment at 773K10.1016/j.jallcom.2008.10.126 ↗
37. Enhanced age hardening response and creep resistance of Mg–Gd alloys containing Zn10.1016/j.scriptamat.2005.07.004 ↗
38. Grain refining mechanism in Mg-Gd-9-4Y alloys by zirconium10.1179/174328405X43153 ↗
39. Recent advances on grain refinement of magnesium rare-earth alloys during the whole casting processes: A review10.1016/j.jma.2023.09.029 ↗
40. Grain refinement of magnesium alloys by zirconium: formation of equiaxed grains10.1016/j.scriptamat.2005.11.002 ↗
41. Model for predicting radial temperature distribution of semi-solid slug produced by Swirled Enthalpy Equilibration Device (SEED) process10.1016/j.jmatprotec.2019.05.017 ↗
42. Impact of intensification pressure and grain refiner on the hot tearing susceptibility of a semi-solid cast Al-Zn-Mg-Cu alloy10.4028/www.scientific.net/SSP.285.283 ↗
43. Effects of cooling rate and grain refiner on semi-solid rheocasting slurries of Al–Zn–Mg alloy
44. Effects of process parameters on shrinkage porosity in 357 semi-solid die casting parts10.4028/www.scientific.net/MSF.993.166 ↗
45. The effects of Mg contents on microstructure and tensile properties of Al18B4O33w/Al-Mg composites10.1016/j.jallcom.2018.11.328 ↗
46. Effects of heat-treatment on the interfacial reaction and tensile properties of Al2O3 coated-Al18B4O33w/Al–Mg matrix composites10.1016/j.matdes.2015.11.011 ↗
47. Defect band characteristics in Mg-Al and Al-Si high-pressure die castings10.1007/s11661-007-9243-1 ↗
48. Semisolid processing characteristics of AM series Mg alloys by rheo-diecasting10.1007/s11661-006-0049-3 ↗
49. Microstructure and mechanical properties of rheo-diecast AZ91D magnesium alloy10.1007/s10853-006-6248-x ↗
50. Rheo-diecasting of Mg-Gd-Y-Zn-Zr alloy and their slurries with high solid fraction
51. Rheo-diecasting of AZ91D magnesium alloy10.1007/s12598-010-0165-5 ↗
52. Microstructural evolution of Mg-10Gd-3Y–1Zn-0.4Zr (wt%) alloy prepared by strain-induced melt activation process10.1016/j.matchar.2020.110831 ↗
53. Phase constitutions, growth pattern and mechanical properties of Mg-1.4Gd-1.2Y-xZn-0.15Zr (at%) alloys10.1016/j.jre.2019.12.019 ↗
54. Influence of various Yb additions on microstructures of a casting Mg−8Gd−1.2Zn−0.5Zr alloy10.1016/j.jallcom.2019.03.104 ↗
55. Formation of a lamellar 14H-type long period stacking ordered structure in an as-cast Mg–Gd–Zn–Zr alloy10.1007/s10853-008-3213-x ↗
56. On the ductility potential and assessment of structural quality in Mg alloy castings10.1016/j.msea.2015.07.003 ↗
57. S. M. He, Study on the Microstructural Evolution, Properties and Fracture Behavior of Mg-Gd-Y-Zr(-Ca) Alloys, Ph.D. Thesis, Shanghai Jiao Tong University, China, 2007.
58. Abridgment of nano and micro length scale mechanical properties of novel Mg–9Li–7Al–1Sn and Mg–9Li–5Al–3Sn–1Zn alloys using object oriented finite element modeling10.1016/j.jallcom.2015.02.066 ↗
59. Serrated yielding during nanoindentation of thermomechanically processed novel Mg–9Li–7Al–1Sn and Mg–9Li–5Al–3Sn–1Zn alloys10.1088/0022-3727/46/14/145304 ↗
60. Transformation of long-period stacking ordered structures in Mg-Gd-Y-Zn alloys upon synergistic characterization of first-principles calculation and experiment and its effects on mechanical properties10.1016/j.jma.2022.09.027 ↗
61. Enhanced mechanical properties and biocompatibility of Mg-Gd-Ca alloy by laser surface processing10.1016/j.surfcoat.2019.01.063 ↗
62. Evading strength and ductility trade-off in an inverse nacre structured magnesium matrix nanocomposite10.1016/j.actamat.2022.117730 ↗
63. Quantifying the synergetic strengthening in gradient material10.1016/j.scriptamat.2018.02.039 ↗
64. Transition of dominant deformation mode in bulk polycrystalline pure Mg by ultra-grain refinement down to sub-micrometer10.1016/j.actamat.2020.07.055 ↗
65. Nanomechanical analysis of AZ31 magnesium alloy and pure magnesium correlated with crystallographic orientation10.1016/j.msea.2015.07.055 ↗
66. Chemistry of nanoscale precipitates in Mg–2.1Gd–0.6Y–0.2Zr (at%) alloy investigated by the atom probe technique10.1016/j.msea.2004.12.035 ↗
67. Precipitation reactions in Magnesium-rare earth alloys containing Yttrium, Gadolinium or Dysprosium10.1016/S1359-6462(02)00596-1 ↗
68. Formation of 14H long period stacking ordered structure and profuse stacking faults in Mg–Zn–Gd alloys during isothermal aging at high temperature10.1016/j.actamat.2007.08.033 ↗
69. Effects of zinc on creep strength and deformation substructures in Mg–Y alloy10.1016/j.msea.2003.12.071 ↗
70. Quantitative experimental study of defects induced by process parameters in the high-pressure die cast process10.1007/s11661-018-4633-0 ↗