journal article·2024-10

Optimization of V-Ti-Fe hydrogen storage alloy based on orthogonal experiments

Hongfa Jiao, Yuanfang Wu, Xiumei Guo, Shaohua Wang, Lijun Jiang, Shumao Wang, Lei Hao, Gongli Tan

Publisher page

Abstract

Vanadium-based solid solution hydrogen storage alloys have attracted much attention because of their high hydrogen capacity, mild hydrogen absorption- desorption conditions, and high safety. However, the V-Ti-Fe alloys, developed at low cost, have a relatively low effective capacity and is unsuitable for practical production. In this work, (V xFe 100-x) 100-yTi y -z%Ce (x=0.83,0.85,0.87; y=16,18,20; z=1,2,3) alloys are designed by orthogonal method to investigate the effect of compositions on the microstructure and hydrogen storage properties. It is shown that the effective hydrogen capacity and desorption plateau pressure of the (V xFe 100-x) 100-yTi y -z%Ce alloy are related to multiple factors, such as lattice constants, tetrahedral interstitials of the BCC and BCT phases, electron concentration and Vickers hardness. The optimized alloy (V 87Fe 13) 82Ti 18-1 %Ce based on the orthogonal experiments shows a reversible hydrogen storage capacity of 2.17 wt% and a desorption plateau pressure of 0.373 MPa at 70°C. The reversible hydrogen capacity of (V 87Fe 13) 82Ti 18-1 %Ce is superior to most V-Ti-Fe alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen Storage and Materials · Hybrid Renewable Energy Systems · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Simulation study on a novel solid–gas coupling hydrogen storage method for photovoltaic hydrogen production systems10.1016/j.enconman.2023.117866 ↗
2. Dimensional effects of nanostructured Mg/MgH2 for hydrogen storage applications: a review10.1016/j.rser.2017.01.107 ↗
3. Development of vanadium based hydrogen storage material: a review10.1016/j.rser.2017.01.063 ↗
4. An analytical review of recent advancements on solid-state hydrogen storage10.1016/j.ijhydene.2023.10.218 ↗
5. Solid state hydrogen storage: decoding the path through machine learning10.1016/j.ijhydene.2023.10.056 ↗
6. Effect of Fe and Al on hydrogen storage properties of 75 V-Ti-Cr alloys10.1016/j.jallcom.2021.161181 ↗
7. Hydrogenation properties and crystal structure of the single BCC (Ti0.355V0.645)100−xMx alloys with M=Mn, Fe, Co, Ni (x=7, 14 and 21)10.1016/j.jallcom.2006.08.070 ↗
8. Hydrogen absorption characteristics of Zr substituted Ti0.85VFe0.15alloy10.1016/j.ijhydene.2007.07.023 ↗
9. A theoretical study of the influence of dopants on the dehydrogenation properties of VH210.1007/s11426-011-4354-3 ↗
10. Application of commercial ferrovanadium to reduce cost of Ti–V-based BCC phase hydrogen storage alloys10.1016/j.msea.2007.04.080 ↗
11. Hydrogen storage in TiCr1.2(FeV)x BCC solid solutions10.1016/j.jallcom.2008.04.062 ↗
12. Cost reduction possibilities of vanadium-based solid solutions-Microstructural, thermodynamic, cyclic and environmental effects of ferrovanadium substitution10.1016/j.jallcom.2015.07.110 ↗
13. Intrinsic mechanisms of superior hydrogen storage properties in V–Fe–Ti alloys: a combined experimental and theoretical study10.1016/j.jpcs.2023.111582 ↗
14. Dependence of hydrogen storage capacity of TiCr1.8-x(VFe)x on V-Fe content
15. Hydrogenation properties of Fe-Ti-V bcc alloys10.1016/j.jallcom.2010.09.030 ↗
16. Optimization of biodiesel production from camelina oil using orthogonal experiment10.1016/j.apenergy.2011.04.041 ↗
17. Numerical investigation of 700°C boiler flue gas thermal deviation based on orthogonal experiment10.1016/j.fuel.2021.120510 ↗
18. Optimization of geometric parameters of hydraulic turbine runner in turbine mode based on the orthogonal test method and CFD10.1016/j.egyr.2022.10.444 ↗
19. Orthogonal experiment optimum design in the power of the rotor on straight-bladed VAWT10.1016/j.egypro.2011.10.113 ↗
20. Hydrogen diffusion in metal-hydrogen systems via NMR and DFT10.1016/j.ijhydene.2015.05.176 ↗
21. Interstitial-atom-induced phase transformation upon hydrogenation in vanadium10.1016/j.jallcom.2018.03.345 ↗
22. Equilibrium hydrogen pressures in the V–H system from first principles10.1016/j.ijhydene.2019.09.010 ↗
23. Hydrogen absorbing properties and structures of Ti-Cr-Mo alloys10.1016/S0925-8388(03)00228-7 ↗
24. Synthesis, crystal structure and hydrogenation properties of the novel metal compound LaNi2Mn310.1016/S0925-8388(02)00838-1 ↗
25. Enhancement of cerium and hydrogen storage property of a low-cost Ti-V based BCC alloy prepared by commercial ferrovanadium10.1016/S1002-0721(09)60200-3 ↗
26. Some factors influencing the hydrogen storage properties of 30V–Ti–Cr–Fe alloys10.1016/j.jallcom.2006.11.122 ↗
27. Hydriding properties and crystal structure of NaCl-type mono-hydrides formed from Ti-V-Mn BCC solid solutions10.1016/S0925-8388(02)00434-6 ↗
28. Semi-empirical model for enthalpy of formation and hydrogen content in Zr-based AB2 alloys10.1016/j.ijhydene.2006.05.017 ↗
29. Hydrogenation properties of Ti–V–Mn alloys with a BCC structure containing high and low oxygen concentrations10.1016/j.jallcom.2010.10.059 ↗
30. Hydrides of intermetallic compounds: a review of stabilities, stoichiometries and preferred hydrogen sites10.1016/0022-5088(83)90091-7 ↗